Kanesville Valley Inc

About Kanesville Valley Inc

Kanesville Valley Inc is a sawmill at 19390 Grand Avenue in Council Bluffs, Iowa. It specializes in large slab milling with its Lucas Mill, and it also does tree removal. It serves Pottawattamie County. Its custom milling takes any log up to 60 inches in diameter and 20 feet long. Milling is charged at 75 cents per board foot, measured by the log scale of the log to be cut, with a $500 minimum. Slab surfacing is $2 per board foot. Off site work carries a $200 load out fee, plus $1 per mile round trip if the job is outside zip code 51503. The mill also runs a vacuum kiln for drying lumber. Packs can hold up to 2,000 board feet, no more than 48 inches wide and 12.5 feet long, and must be stickered. Drying costs $1 per board foot for 4/4, $2 for 8/4 and $3 for 12/4. Each load is metered weekly to 6 to 8 percent moisture content, and the kiln dries wood at rates of "up to 10 times faster than a traditional wood kiln." Partial kiln loads are quoted on request. Delivery is available. For tree removal, the company offers a free estimate. Its crews use grapple saws and ground mats, and they do crane-assisted removals. Kanesville Valley Inc suits a Pottawattamie County landowner who already has logs and wants them milled into slabs or lumber and kiln dried, or who needs a large tree taken down safely. From kvitree.com, read 8 November 2026.

Everything they're registered for

See what every forester service means →

Counties covered