Selling Timber in Brunswick County, NC

Nine counties in the Cape Fear corner — Brunswick and New Hanover inland to Bladen, Robeson and Sampson — held by a firm whose registration, number 526, is among the twenty oldest on the state register. Eight services, weighted toward the sale: appraisal, cruise, sale administration, plus reforestation, stand improvement, forest real estate and marketing. It reads as timber work in a defined stretch of the state rather than a broad land-consulting practice. No website is listed.

Crawford Forest Management is a consulting forestry firm based in Wilmington that works with private landowners across southeastern North Carolina, naming Bladen, Brunswick, Columbus, Duplin, New Hanover, Pender and Sampson counties on its own site, while the state register carries it for Alamance, Caswell, Onslow and Robeson as well. The firm is owned and operated by Noah Crawford, a registered consulting forester with more than five years in the industry who previously worked for an established consulting forestry firm where he actively managed over 20,000 acres of timberland. He holds a Master of Forestry from North Carolina State University and a bachelor of science in environmental science with a minor in economics from UNC Wilmington, a combination the firm says lets it speak to land economics as well as silviculture. The published services run from full timber sale management, covering cruising, marketing, bid solicitation and contract oversight, through forest management planning, timber inventory and appraisal, reforestation and site preparation, long-term landowner and harvest-schedule consulting, help enrolling in federal and state cost-share programs, boundary identification and mapping, and Tree Farm certification support. As described on crawfordforest.com, read 23 September 2026.

Registration 161 is the third oldest on the entire N.C. register, and this is one of the few firms in the directory carrying two registered foresters rather than one — so the practice does not rest on a single person. The counties are concentrated in the southeastern coastal plain, from Robeson and Columbus out to Brunswick, New Hanover, Pender and Onslow. Twelve services: the full appraisal, cruise and sale administration set, plus logging engineering, prescribed burning, forest taxation and forest real estate. Alexander County is also listed, well away from the rest.

Land, Farms & Timber, Inc. is based in Lake Waccamaw, North Carolina, and is listed as a forestry consultant, also doing timberland brokerage. Its register entry lists forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimate, timber sale and contract administration, prescribed burning, forest real estate, recreation management, and utilization and marketing. It states N.C. Registered Forester #586. It serves a long list of North Carolina counties, including Bladen, Columbus, Robeson, Sampson, Duplin, Cumberland, Johnston, Moore, Richmond, Scotland, Stanly, Union, Anson, Montgomery, Chatham, Lee, Harnett, Hoke, Rockingham, Alexander, Alleghany, Ashe, Avery, Burke, Caldwell, Watauga, Wilkes, Beaufort, Carteret, Craven, Dare, Hyde, Jones, Lenoir, New Hanover, Onslow, Pamlico, Pender, Pitt, Tyrrell, and Washington. This fits a landowner in eastern or western North Carolina who wants someone offering both forestry consulting work, such as a timber cruise or a management plan, and help selling forest real estate, under one listing. From advancelandandtimber.com, read 10 October 2026.

Eleven counties in the southeastern coastal plain — Columbus, Bladen, Robeson and the tier around them, out to Brunswick and New Hanover. That's a tight working radius rather than a statewide operation, which is the point if your tract is down there and you'd rather deal with someone who already knows the local mills. Appraisal, cruising and sale administration are all on the register, so the full sale can be run from one desk, and prescribed burning, herbicide work and wildlife management round out the list.

Longleaf and loblolly country — seventeen counties clustered in the southeastern coastal plain and the Cape Fear valley, including Bladen, Columbus, Robeson, Sampson, Pender, Brunswick and New Hanover. The register credits the firm with appraisal, cruising and sale administration, plus prescribed burning, herbicide application, logging engineering and utilization and marketing. Registration 778 places it in the older half of the register. Henderson and McDowell also appear on the county list, well west of everything else.

Southern Palmetto Environmental Consulting, LLC is based in Myrtle Beach, and is registered as a forestry consultant covering a list of North Carolina counties: Bladen, Brunswick, Chatham, Columbus, Cumberland, Duplin, Harnett, Hoke, Johnston, Lee, Moore, New Hanover, Pender, Richmond, Robeson, Sampson, and Scotland. The forester holds N.C. Registered Forester #1433. The work on offer is broad. On the forestry side it covers forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimate, timber sale and contract administration, insect, disease and fire protection, prescribed burning, timber harvesting and marketing, site preparation, thinning, and pine straw management and marketing. Beyond timber, it also handles wetland consulting, with assessments, delineations with USACE verification, 404 permitting, mitigation design and implementation, and critical area dock permits, plus endangered species consulting, wildlife management, recreation management, herbicide application, environmental impact statements, stewardship plans, and forest real estate work. In its own words, "SPE works with landowners to provide environmental solutions to common and uncommon issues." There's no stated minimum acreage, so this looks like a fit for a landowner whose needs go beyond a straight timber sale, someone also dealing with wetlands, wildlife, or a protected species question on their land, alongside the usual forest management and harvest work. From southernpalmettoenvironmental.c, read 10 October 2026.

Twenty services, the top of the state's A–U list and a wider spread than 98 percent of firms on the register. Surveying and wetland delineation sit next to appraisal, cruising and sale administration, so a boundary question or a stretch of wet ground can be handled by the same firm running the timber sale. Forest taxation and forest real estate are on there too. The office is across the line in Conway, South Carolina; the sixteen NC counties served run through the southeastern coastal plain and the Sandhills.

Fifty-nine counties from a one-forester office in Beulaville — effectively the whole coastal plain, from the Currituck and Dare marshes south to Brunswick, plus a long reach west through the Triad into Surry and Yadkin. Eighteen services puts this firm near the top of the register for breadth, and two of them are worth noticing: wetland delineation and environmental impact statements, which matter if the tract has bottomland or a permitting question attached to it. Valuation, cruising and sale administration are all covered. No website is listed.

Surveying and wetland delineation sit on this firm's service list alongside the forestry work, which matters more than it sounds: a boundary question or a wet corner of a tract can be dealt with on the same visit as the cruise. Sixteen counties, most of them in the southeastern coastal plain between Sampson and the lower Cape Fear, with a few reaching north to Wake and Franklin and one as far west as Gaston. Appraisal, cruising and sale administration are all on the register, so the firm can carry a sale from valuation through to contract.

Seven registered foresters — as many as any firm on the state register — and sixty counties covered, which together make this one of the largest consulting operations working in North Carolina. The reach runs from the foothills in Burke and McDowell across the piedmont and the sandhills to the coast at Brunswick, Onslow and Carteret. The full sale package is here: appraisal, cruise, and running the sale through to contract. Nineteen services in all, including prescribed burning, wetland delineation, environmental impact statements and forest taxation — which matter when a timber sale is one piece of a larger land or estate question. The company's own website is a national corporate one rather than a local office page, and it describes a firm of that scale: a corporate office in Charlotte, offices across the Northeast, Southeast, Lake States, Pacific Northwest and Gulf regions, and almost sixty years spent helping landowners manage, sell, buy, improve and enjoy millions of acres — AFM dates itself to 1966, when Bartow S. Shaw, Jr. formed the predecessor firm Bartow Shaw and Associates. It states a size threshold for the land management work in its own words: property of fifteen acres or more. The published service lines run well past timber alone — timber sales and timber management, reforestation and silviculture, forest inventory to establish volumes and values, wildlife services and habitat restoration, environmental services, forest carbon, land surveying, wood flow for navigating fibre supply agreements, farmland management through AFM Ag Services, and forestry and property accounting handled by a dedicated team of about twenty including CPAs on staff, covering property tax administration, audit support and hunt lease administration. Forest certification is offered too: the firm says management operations are conducted under FSC, SFI and ATFS guidelines. As described on americanforestmanagement.com, read 22 September 2026.

Eighteen counties across the southeastern and south-central coastal plain — Sampson, Duplin, Cumberland, Robeson, Bladen, Columbus and Brunswick, reaching north to Johnston, Wake, Wilson and Nash. The essentials for a timber sale are all on the entry: appraisal, cruise, and administration of the sale through to contract. Thirteen services in total, with prescribed burning, herbicide application, wildlife management, recreation and forest taxation rounding it out. No website appears on the register.

The office is in Florence, South Carolina, across the state line — but the register lists ten North Carolina counties, running from Anson and Richmond through the Sandhills and down to Columbus and Brunswick on the coast. Appraisal, cruising and sale administration are all here, which is the set a landowner needs to take a standing tract to a competitive sale. Reforestation, herbicide application, forest real estate and wildlife management fill out a nine-service list. No website is listed.

Most of the coastal plain is in range here — Northampton and Halifax in the north, down through the Neuse and Cape Fear country to Brunswick — thirty-four counties in all, well above the register's median of twenty, with Caswell, Person, Lee and Moore attached on the piedmont side. Appraisal, cruise and sale administration are all listed, along with prescribed burning, herbicide application, forest real estate and forest taxation. Registration 578 is among the older on the register, and the firm holds ACF membership, which is limited to full-time consultants.

The office is in Florence, South Carolina — over the state line — and the North Carolina coverage is a tight eight counties in the southeast, from the Robeson and Scotland sandhills out to Brunswick and Pender on the coast. Ten services, a narrow list by register standards: management plans, reforestation, stand improvement, prescribed burning, and the full appraisal, cruise and sale-administration set a competitive timber sale needs. The firm is a member of the Association of Consulting Foresters, whose rolls are open only to full-time consultants. No website is listed.

Dargan, King, and Knight LLC is a forestry consulting firm based in Darlington, South Carolina. They work as timberland brokers too, handling both the timber and the land itself for owners who need one or the other, or both. Their work covers the full range: forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, insect, disease and fire protection, prescribed burning, forest real estate, recreation management, forest taxation, utilization and marketing, wildlife management, and stewardship plans. On the timber side they've handled species like pine sawlogs, red oak, cherrybark oak, and cypress, and they also plant longleaf seedlings as part of reforestation work. They hold a N.C. Registered Forester license, #1561. They serve Anson, Bladen, Brunswick, Columbus, Hoke, Richmond, Robeson, and Scotland counties. There's no stated minimum acreage, but the smallest job shown on their pages is a tract called the O'Bryan Tract, listed at approximately 128 acres. That suggests their work tends toward larger tracts rather than small home lots. Their own words on a timber sale: they say they are "confident that we generate the most timber sale revenue possible for the landowner, while ensuring a quality logging job," and that the goal is for "each tree to reach its highest potential value market." This firm fits a landowner with a sizable tract, especially one who also wants help with the land itself, through sale, appraisal, or long-term management, not just a one-time timber cut. From dkkforestry.com, read 10 October 2026.

Every service the state's A–U schedule covers is on this record — all twenty, more than 98 percent of firms on the register. So the timber-sale core of appraisal, cruise and sale administration sits alongside surveying, wetland delineation, prescribed burning, Christmas tree management and urban forestry. A landowner with a boundary question or a wet corner can get both answered on the same visit as the cruise. Coverage spans forty counties, from the north-central piedmont down through the sandhills and out to the southeastern coast. Memberships in the Society of American Foresters and the International Society of Arboriculture are recorded; no website is.

This firm holds one of the twelve oldest registrations on the North Carolina register, out of 178 — a long stretch on the state list. The office is in Manning, South Carolina, and the North Carolina territory runs twenty-eight counties, from Mecklenburg and Iredell through the Sandhills and down to the Brunswick and New Hanover coast. Fifteen services, including logging engineering, wetland delineation and stewardship plans, and the full sale sequence: value the stand, cruise it, administer the sale. Association of Consulting Foresters membership puts consulting at the center of the business.

Every county in North Carolina is listed against this firm — all 100 — which puts it in the small group on the register that will work anywhere in the state. The service list is narrow by comparison: ten entries, built tight around the sale itself, with appraisal, cruising and sale and contract administration at the middle and forest taxation, utilization and marketing, urban forestry and stewardship plans around them. Both ACF and SAF memberships are recorded. One registered forester covers that ground, which is worth knowing when you're arranging a visit.

Kiker Resource Management works out of Wadesboro, at the centre of a thirty-six county North Carolina territory that runs west to Cleveland and Gaston, north through Mecklenburg, Iredell, Durham and Granville, and east across the Sandhills to Brunswick, New Hanover and Pender. Its own site casts the practice wider still, describing work throughout the southeastern United States including Virginia and South Carolina, with a second office at Anderson, South Carolina. The home page sums the firm up as 'forest resource management, wildlife management consulting services, land sales', and it publishes service pages for timber sales, forest and land management, reforestation, prescribed burning, hunting leases, mapping and technical services, wildlife management consulting, forest certification and real estate. The forest and land management page says KRM starts every job by learning the landowner's objectives, whether that is long-term management of high-yield pine plantations, wildlife habitat improvement, a one-time harvest or outdoor recreation, then inventories species composition, stand origin, acreage, site quality and stocking before writing a plan carrying timber value estimates, harvest schedules and cash flow estimates. The reforestation page is the most detailed: KRM reforests an average of 2,500 acres a year for clients, buys about 1.5 million genetically improved seedlings annually, keeps an employee with the planting crews full time for quality control, and puts its herbicide and tree planting work out to bid each year. Its history page dates the practice to June 1978 under a predecessor name, Kiker Forestry and Realty, Inc., with the present LLC formed when Jason Kiker bought the firm in 2007, and counted ten full-time and two part-time employees in 2023, among them eight graduate foresters. The firm also holds an FSC group certificate and takes part in the American Tree Farm System. As described on kikerforestry.com, read 23 September 2026.

Effectively the eastern two-thirds of the state: sixty-eight counties covering every county on the coastal plain and most of the piedmont, which puts this among the widest-reaching listings on the register. Two registered foresters, the older registration numbered 914. The sale trio is present — appraisal, cruise, contract administration. Surveying is on the service list as well, alongside forest real estate and urban forestry, so a boundary or title question does not need a second firm. On its own site the business trades as Carolina Forestry & Realty, a privately owned professional corporation held by co-owners Keith Brouillard and Rodney Finkbiner and recognised by the N.C. Board of Registration for Foresters as a Professional Forestry Company, working in North Carolina and Virginia and claiming more than 30 years of it. Timber is sold for the landowner on a lump-sum sealed-bid basis, the site saying a sale can draw five to ten bids, after an appraisal done by cruising on larger even stands or by tree count on small or irregular ones. Beyond the sale it lists timberland investment analysis, comprehensive management plans with growth-and-yield and economic projections, pulpwood and residential or development thinnings, disease and pest management, property tax reduction, damage and trespass appraisals and boundary line maintenance. The forestry side sits next to a working rural land brokerage: both owners are licensed brokers and Realtors and the firm publishes its own listings, so a landowner deciding between selling timber and selling the tract can put both questions to the same office. As described on carolinaforestry.com, read 22 September 2026.

Seven registered foresters is the top of the range on the state register, and it comes attached to eighty-four counties — mountains to the Outer Banks, with very little of North Carolina out of reach. Scale like that means a landowner isn't waiting on one person's calendar, and it means the firm doesn't vanish when someone retires. Nineteen services: wetland delineation, environmental impact statements, forest taxation and urban forestry, alongside the appraisal, cruise and sale-administration combination a competitive timber sale actually runs on. ACF and SAF. The firm trades as GFR Forestry Consultants and dates itself to 1964, and it works from four North Carolina offices — Raleigh, Lillington, Tarboro and Lake Waccamaw — with its published service area running beyond the state line into South Carolina, Virginia, Maryland and the Eastern Shore. Its own account of a timber sale runs from stand assessment through a sale announcement and marketing plan to bid management, handled by foresters it says keep current on local buyers, pricing and competition; on the management side it names timber inventory and valuation, timber trespass analysis, forest management planning, GIS mapping, boundary line location and maintenance, pulpwood thinning, pest and disease control, fire protection measures and hunt and lease management. Two services sit outside the usual consulting list: timber basis determination and tax planning for estates and long-held family land, and wood flow and logistics work for landowners or businesses moving product to buyers. It also runs a rural real estate side, brokering timberland, hunting and agricultural tracts through licensed N.C. brokers. As described on gfrforestry.com, read 22 September 2026.

The office is in Charlottesville, Virginia, a good way over the state line, but the North Carolina coverage is nothing marginal: 64 counties, wider than 93 percent of firms on the register. That takes in the whole piedmont and coastal plain east of the mountains, from Currituck and Brunswick inland to Surry and Rockingham. Two registered foresters, fifteen services — wetland delineation and environmental impact work sitting alongside the appraisal, cruise and sale-administration set — and ACF membership. The company website is a corporate one and says nothing about any particular North Carolina office or county: it states only that F&W's foresters are located throughout the United States, South America and Europe, and points visitors to a find-your-local-forester map. What it does set out is the firm behind the local contact. F&W says it was founded in 1962 by Eley Frazer and Frank Wetherbee, is headquartered in Albany, Georgia, and manages millions of acres of forestland worldwide; its published timeline runs from regional inventories and forestland appraisals in the 1970s, through growth from 25 employees in two states to 100 in eight states during the 1990s, to expansion into Uruguay and Brazil and the Tree Farm Group certification in the 2000s and the acquisition of Fountains US and UK in 2016. Eight service lines are published — timber sales, property management, field support services for TIMOs and REITs, forest inventory and mapping, forestland accounting, technical and analytical work, real estate, and natural capital. On timber sales specifically the firm describes pre-harvest valuation reporting on species, age and condition, sale layout and marketing to match timber to the best market, then on-site harvest supervision: harvest inspections and reporting, streamside management zone delineation, BMP compliance audits, timber marking, boundary re-marking and road maintenance oversight, with Phase I Environmental Site Assessment available during property transactions. As described on fwforestry.com, read 22 September 2026.

Timber Marketing and Management of the Carolinas, Inc. is the forestry side of a Raleigh practice whose site now carries the TMM Real Estate LLC name, and its forester, Edwin E. Orr, holds N.C. Registered Forester number 477 - the fifteenth-oldest of the 178 registrations on the state register. The service area is broad to match: thirty-nine North Carolina counties running from Caswell and Stokes on the Virginia line, through the Triangle and the sandhills, down to Brunswick and the coast. The company's own account says the business has roots in land sales going back to the early 1980s, when Timber Marketing & Management of the Carolinas Inc. was selling rural farms and timberland properties, and that sales today take in a wider range of property, including transitional, residential development, recreational land and timberland. Its timber sales page says the sale of timber is the most critical time for a landowner to get professional advice, and describes the firm helping an owner decide which trees to sell and when, making intensive inventories, setting sale conditions to protect the property, checking the sale against government regulations, advertising and marketing it, accepting bids or negotiating offers, overseeing preparation of the timber deed, closing, and inspecting the harvesting operation; logging inspections are carried out on every sale it handles. The inventory and appraisals page says cruises are run by plot sampling, strip sampling, point sample or 100 percent marking, from light-intensity sample cruises up to estimates in which every tree is measured and marked. Timberland management plans are built on inventory and growth data, carry timelines and income and expense projections, and draw on experience in natural pine, plantation pine and hardwood, implemented through the firm's own employees and independent contractors. Growth studies and yield projections, reforestation, annual property inspection for absentee owners, boundary line maintenance and mapping complete the list. As described on tmmoc.com, read 23 September 2026.

Registration 513 sits seventeenth-oldest on the state register, and the firm holds Association of Consulting Foresters membership — ACF admits full-time consultants only, so it signals this is the business rather than a sideline. The office is in Blythewood, South Carolina, but the NC Forest Service register credits sixty-two North Carolina counties: the mountains, effectively the whole piedmont, the sandhills and the southeastern coast. Fourteen services, with appraisal, cruising and sale administration at the center and forest taxation, forest real estate and stewardship planning around them.

Milliken Advisors Inc. is a forestry consulting and timberland brokerage business in Columbia, North Carolina. It works with landowners on the kind of jobs that come with owning timberland, from planning a sale to planting trees back after a harvest. The work on offer covers forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, insect, disease and fire protection, prescribed burning, forest real estate, recreation management, forest taxation, utilization and marketing, herbicide application, and stewardship plans. The forester holds N.C. Registered Forester credential #1394. Milliken Advisors serves landowners across a long list of North Carolina counties, among them Wake, Mecklenburg, Guilford, Buncombe, and Dare. The business has been working with landowners since 1949. Its own description of how a job runs is plain: "Once we know what you want, we take a good look at your land: its current state, what's happening in the market, and what the future could hold. Then we build a strategy that actually fits your needs." On follow-through, it says "You don't have to worry about juggling contractors or chasing down deadlines." This fits a landowner who wants one firm to handle a timber sale or a management plan from start to finish, rather than piecing the work together themselves. From millikenadvisors.com, read 10 October 2026.

Worth noticing before anything else: the listed office is in Weldon, up on the Roanoke in Halifax County, but the ten counties served are all in the far southeast — Bladen, Brunswick, Columbus, Robeson, Sampson, Duplin, Pender, New Hanover, Onslow and Cumberland. That is a long way apart, and worth confirming. The service list itself is a full one at fifteen, with appraisal, cruising and sale administration all present, plus prescribed burning, forest taxation and forest real estate. SAF member.

All 100 counties, which only a handful of firms on the state register can claim — wherever the tract sits in North Carolina, this one covers it. Two registered foresters, and the older of the two registrations is number 482, sixteenth-oldest of the 178 on the register. Appraisal, cruise and sale administration are all here, so a landowner can value the stand, measure it and run the sale through to contract in one place. Seventeen services in all, out as far as Christmas tree management, urban forestry and forest taxation. The firm holds Association of Consulting Foresters membership, which is limited to full-time consultants. The firm calls itself family owned and says it has run a consulting forestry business for over 40 years; William H. Lock has retired from full-time forestry work and his son Jonathan C. Barnes, who passed the state forestry exam in 2002, now runs the company as president. Alongside state registration in both North Carolina and Virginia it claims Certified Forester and Certified Arborist credentials, Tree Farm Inspector status and Technical Service Provider approval for NRCS cost-share programs, and it offers work turn-key — timber inventory, marketing, harvest inspection and reforestation through one office — plus timber tax basis estimates, timber trespass reports, growth models for income projections and landowner seminars and field tours. Real estate is the one thing it has pulled back from: the site says that side is now limited to advice and referrals rather than listing and selling land. Its public timber sale notices, bids taken sealed at the office, run from 2010 through 2021 and cover tracts from a few acres up to about 280, clustered in Rockingham, Guilford, Alamance and Caswell counties and over the line into Henry and Pittsylvania counties, Virginia. A first consultation is offered free. As described on whlock.com, read 22 September 2026.

Registration 392 is the tenth-oldest entry on the North Carolina register, about as long a tenure as this directory contains. Coverage runs seventy counties — the entire mountain west, the whole piedmont, and down through the sandhills to the southeastern coast, stopping short only of the northeastern corner. Thirteen services, including appraisal, cruising and sale administration, plus forest taxation, forest real estate and prescribed burning. For a landowner whose sale is tangled up with an estate or a tax question, that last combination is the point.

The register gives Interstate Forest Products forty-five counties — the whole coastal plain from the Virginia line to South Carolina, plus a run up into Franklin, Granville and Warren — and eight services, appraisal and cruising among them but not sale administration. The firm's own site fills that gap. It describes itself as “a forestry consulting company serving Virginia and North Carolina,” trades as Interstate Forest Products LLC, and was founded in 2011 by Chuck Little after sixteen years buying timber for firms including Georgia-Pacific and Coastal Lumber; it says IFP is listed as a consulting forester in both states, with thirty years in these local timber markets. Most of the site is given over to the timber sale, run as a sealed bid: the cruise and appraisal that set a minimum bid never disclosed before the sale, a sale notice sent to buyers with the cruise attached, a sale map showing acres, access and harvest boundaries, three to four weeks for bidders to cruise it, bids read aloud on the day, and a thirty-day close in which the buyer runs the title search, prepares the timber deed and pays in full, timber rights usually running two years. Thinnings are handled differently: sold per ton, treated as a silvicultural treatment rather than a harvest, and awarded on the operator's care — the firm writes it would rather take a few cents less and be left with a good stand. Management plans are the other main line: acreage, ownership, location and objectives; stands divided by age, timber type, soil type and condition; soil maps and photographs; per-stand recommendations and a schedule by year. The site notes an up-to-date plan is required for reforestation cost share, and recommends replanting clearcuts with improved loblolly pine seedlings in late fall or winter, with site prep spray or bedding where needed and longleaf, shortleaf or hardwood alternatives where cost share helps. Another page argues there is no timber price index to watch, and that local mill conditions and logging weather matter more. The site publishes N.C. Registered Forester #1429, N.C. ProLogger certification and N.C. Forestry Association membership. As described on interstateforestproducts.com, read 23 September 2026.

All one hundred counties — one of the few listings on the register that covers the entire state. The registration here is number 8, the second-oldest of the 178 registrations on the register, which is about as long a tenure as North Carolina forestry has to offer. Beyond the sale work of appraisal, cruise and contract administration, this firm surveys, so a boundary question and a timber cruise can be settled on the same visit. Christmas tree management, wetland delineation and environmental impact statements are also listed.

Statewide coverage — all 100 North Carolina counties — from an office in Gainesville, Georgia. Fifteen services are recorded, including the three that make a timber sale work: appraisal, cruising, and sale and contract administration. Prescribed burning, herbicide application, urban forestry and stewardship plans fill out the rest. The register carries this entry under the name US Forest Service, with one N.C. Registered Forester and no website given.

The N.C. Forest Service register carries Dougherty & Dougherty across sixty-three North Carolina counties, foothills through piedmont to coastal plain — but the firm is run from Georgia. The register address is a PO box in Athens, Georgia, and the North Carolina connection is Derek Dougherty's registration, number 1029, rather than a North Carolina office. Trading as Progressive Forestry, the firm's site states that it “manages forest land for private forest landowners in the Southeastern US” with staff it describes as “college-educated, field-trained, and licensed forestry professionals,” and says its experience spans forest management, real estate investment, research and tree breeding. Its timberland management page sets the services out in detail: property and annual inspections, timber inventory reported in tons, cords or thousand board feet by species and product class, timber appraisal, boundary line marking, prescribed understory burning, plantation establishment, seed source selection, mid-rotation work, GIS mapping, growth and yield modelling, harvest scheduling and forest investment analysis. It also answers a question the register leaves open. The register credits the firm with appraisal and cruising but not with sale administration; the site says the firm prepares and oversees the marketing and harvest itself, by negotiation or sealed bid, with lump-sum or per-unit payment and clear-cut, select-cut or thinning harvests, including logging inspections and its own timber security and tracking system. The firm states it is a certified Forest Stewardship Program plan writer in North Carolina. Hardwood is treated as a speciality: the site argues the South's hardwood resource sits “well below its potential” after a history of high-grading, and describes a system of site and stand evaluation aimed at regular production of grade hardwood. Species named across the site include loblolly, longleaf and slash pine, green ash, yellow poplar and eucalyptus. A consultation line covers audits, seedling advice and expert witness work on timber trespass overcuts and failed plantations. No founding year is published. As described on progressiveforestry.com, read 23 September 2026.

Hunt Forest Resources, LLC is a timber buyer based in Moncure, North Carolina, with forestry consulting, firewood, and wood recycling run alongside it. They buy stumpage, sawlogs, pulpwood, and chip-n-saw timber in pine and hardwood, and they also handle forest management plans and mapping, timber cruise and volume estimates, timber appraisal, timber sale and contract administration, reforestation, timber stand improvement, prescribed burning, herbicide application, insect and fire protection, and wildlife and recreation management. Their registered forester holds N.C. Registered Forester #1438, and the company carries ProLogger and American Tree Farm System (ATFS) standing. They work across a long list of North Carolina counties, from Alamance, Durham, and Wake, through Chatham and Moore, down to Brunswick and New Hanover, and out east to Dare, Hyde, and Beaufort, along with many others. On their own pages they describe offering "a diverse range of services that span the entire lifecycle of forest products, from land and timber management to sustainable harvesting, real estate services, wood products manufacturing and beyond," and say they manage "7,000 acres of timberland annually" across four facilities in the state. This suits a landowner who wants one outfit that can buy the timber, write the management plan, and keep an eye on the ground afterward, rather than stitching together a buyer, a consultant, and a logger separately. From huntforestry.com, read 10 October 2026.

Corbett Timber Company is a timber buyer, logger, and forestry consultant based in Wilmington, North Carolina. They buy "every standing timber type", as well as soft hardwood logs for mills and other manufacturing use, and they work with Long leaf pine and Loblolly pine among other species. Their harvest work covers clear cut, row thinning, select thinning, residential thinning, seed tree, shelter wood, swamp logging, whole tree chipping, brush reduction, and fuel chipping. Past jobs include thinning on Long leaf pine and Loblolly pine plantations, and a residential thinning where a chipper was used to clear underbrush. Beyond the harvest itself, they offer timber appraisals, GIS mapping, marketing and merchandising advice, reforestation, and management plans, along with procurement services. Their staff includes Registered Foresters and Certified Tree Farm Inspectors. The business traces its timber brokerage work back to the mid-1980s, building on generations of logging before that. They serve New Hanover County. A minimum of 10 acres applies, stated on their contact page as "Property Location & Size (Minimum 10 acres required)". This fits a landowner with a mixed pine or hardwood tract who wants one company to handle the cut, the paperwork around it, and the replanting after, rather than hiring separate people for each step. From thecorbettcompanies.com, read 10 October 2026.

Simmons Logging & Trucking is a logging contractor in Ash, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

3-D Footprints Logging, Inc. is a timber buyer in Pembroke, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 12 counties, including Bladen, Brunswick, Columbus and Cumberland. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Canal Wood has been buying wood since 17 September 1937, when it was formed to supply pulpwood to International Paper's then-new mill at Georgetown, South Carolina. It describes itself as the largest independent timber merchant in the Southeast, with more than 100 staff timber buyers spread across three dozen-plus field offices in seven states; Riegelwood is one of seven North Carolina offices, alongside Lumberton, New Bern, Laurinburg, Louisburg, Wallace and Rockingham. The company's service list runs past the purchase itself — cruising, harvesting and thinning, management planning, timber marketing, transportation and land sales. Canal Wood also says it is certified by the Forest Stewardship Council; that is a claim on its own website and has not been checked against the FSC certificate database.

Canfor Southern Pine-Conway is a timber buyer based in Conway, South Carolina, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Standing Timber, Sawlogs, Chip-N-Saw Logs and Lumber. It covers 8 counties, including Bladen, Brunswick, Columbus and Cumberland. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Claybourn Walters Logging Co is a logging contractor in Fairmont, North Carolina. It has a Google Maps business listing in that category. It is also listed as a timber buyer. A listing here is not an endorsement.

Davis Timber Company, Inc. is a timber buyer in Bladenboro, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 7 counties, including Bladen, Brunswick, Columbus and Duplin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Evergreen Products Inc is a timber buyer in Wilmington, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Chip-N-Saw Logs, Ply or Veneer Logs, Pulpwood, Poles and Chips. It covers 6 counties, including Bladen, Brunswick, Columbus and Duplin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Interfor - Georgetown is a timber buyer based in Georgetown, South Carolina, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Sawlogs. It covers Brunswick, Columbus, New Hanover and Robeson counties. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

A receiving woodyard rather than a mill: the NC Forest Service register lists it buying pulpwood and chip-n-saw across eleven counties, from Columbus and Brunswick through New Hanover, Pender, Bladen and Duplin, with a Riegelwood PO box as its address. Research could find no page anywhere describing the Cape Fear Woodyard as a facility in its own right — International Paper's own location URL for it returns a 404, and the Global Cellulose Fibers locations directory lists mills only, with no North Carolina woodyards at all. There is also an open question about the name on the sign: in August 2025 International Paper agreed to sell its Global Cellulose Fibers business, including the Riegelwood pulp mill this yard would feed, to American Industrial Partners. Whether the woodyard was part of that transaction is not documented.

J.W. Connor & Son, Inc. is a timber buyer in Lake Waccamaw, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: A White Cedar, Cypress, SYP, Ash, Beech, Black/Tupelo Gum, Hickory and Soft Maple. Products: Standing Timber, Sawlogs, Chip-n-Saw, Pulpwood, Veneer & Plylogs, Poles, Chips and Fuel Chips / Fiber Fuel. It covers 8 counties, including Bladen, Brunswick, Columbus and Duplin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Lumber River Timber Co Inc is a logging contractor in Lumberton, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Michael L. Goodson Logging, Inc. is a timber buyer in Jacksonville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 14 counties, including Brunswick, Carteret, Craven and Duplin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Premier Timber Harvesting, LLC is a timber buyer in Bladenboro, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 19 counties, including Bladen, Brunswick, Chatham and Columbus. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Stewart's Forest Services, Inc. is a timber buyer in Germantown, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 99 counties, including Alamance, Alexander, Alleghany and Anson. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Tima Capital, Inc. is a timber buyer in Wilmington, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine and Yellow-poplar. Products: Standing Timber, Sawlogs, Ply or Veneer Logs and Lumber. It covers 7 counties, including Bladen, Brunswick, Columbus and Duplin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Tri State Land & Timber LLC is a logging contractor in Jacksonville, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Tri-State Land & Timber, LLC is a timber buyer in Pelham, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber. It covers 6 counties, including Alamance, Caswell, Durham and Orange. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Tri-State Land & Timber, LLC is a timber buyer in Harrells, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber. It covers 22 counties, including Bertie, Bladen, Brunswick and Camden. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Triangle East Timber Co Inc is a logging contractor in Mt Olive, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

The Armour mill on Federal Road is a softwood sawmill, one location of West Fraser Timber Co. Ltd., a publicly traded producer that states it runs more than 50 locations including 32 lumber mills. It sits on the NC Forest Service register as a buyer of standing timber and sawlogs reaching twelve counties, from Columbus and Bladen west to Anson, and it belongs to the Columbus County Chamber of Commerce & Tourism. In March 2025 crews contained a fire in the mill's debris storage yard; a company spokesperson said all employees were safe, there was no property damage, and the mill, logs and lumber were not impacted.

WestRock - Florence, SC is a timber buyer based in Florence, South Carolina, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Standing Timber and Pulpwood. It covers 21 counties, including Anson, Bladen, Brunswick and Chatham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Wood Forest Resources, LLC is a timber buyer in Wilson, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: Southern Yellow Pine, Ash, Red Oak, White Oak, Hickory, Sweetgum and Yellow Poplar. Products: Standing Timber, Sawlogs and Pulpwood. It covers 69 counties, including Alamance, Anson, Beaufort and Bertie. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.