Selling Timber in Scotland County, NC

ZV Pate, Inc./Shoeheel Land Management is based in Laurel Hill, North Carolina, and works as a forestry consultant and timberland broker. The work covers forest management plans and mapping, timber cruises and volume estimates, timber appraisal, timber sale and contract administration, reforestation, timber stand improvement, prescribed burning, insect and disease and fire protection, forest real estate, recreation management, forest taxation, utilization and marketing, herbicide application, wildlife management, urban forestry, and stewardship plans. The business serves landowners in Anson, Hoke, Montgomery, Moore, Richmond, Robeson, and Scotland counties. Its forester holds N.C. Registered Forester credential #1655. This fits a landowner in that stretch of North Carolina who wants one outfit able to handle the whole range, from writing a management plan to running the timber sale itself. From z-v-pate-inc.keeq.io, read 10 October 2026.

Fourteen services from a single registered forester is a wide brief, and it spans the whole arc of a sale: appraisal, cruise, sale and contract administration, then reforestation and stand improvement once the loggers are gone. Prescribed burning, herbicide work, wildlife management and recreation planning are on the register entry too — the profile of someone managing ground year-round rather than only at harvest. The territory is fifteen counties across the sandhills and southern piedmont, from Cabarrus and Union east to Cumberland and Robeson.

Surveying is the unusual entry here. Alongside appraisal, cruising and sale administration, the register lists this Rockingham firm for survey work — which means a boundary question and a timber cruise can be settled on the same visit, useful on inherited tracts where nobody is quite sure where the line runs. The footprint is deliberately tight: ten counties through the sandhills and the Uwharrie country, from Guilford and Randolph down to Scotland and Anson.

One of the thirteen oldest registrations out of the 178 on the North Carolina register — a long time on the state list. Fourteen counties in the Sandhills and southern piedmont, worked out of Aberdeen, and forestry is paired with forest real estate, so a timber sale and a land sale can go through the same shop. Prescribed burning and herbicide application are on the service list as well, both of which come up on the pine ground in this part of the state. Appraisal, cruise and sale administration are all covered.

Seven registered foresters — as many as any firm on the state register — and sixty counties covered, which together make this one of the largest consulting operations working in North Carolina. The reach runs from the foothills in Burke and McDowell across the piedmont and the sandhills to the coast at Brunswick, Onslow and Carteret. The full sale package is here: appraisal, cruise, and running the sale through to contract. Nineteen services in all, including prescribed burning, wetland delineation, environmental impact statements and forest taxation — which matter when a timber sale is one piece of a larger land or estate question. The company's own website is a national corporate one rather than a local office page, and it describes a firm of that scale: a corporate office in Charlotte, offices across the Northeast, Southeast, Lake States, Pacific Northwest and Gulf regions, and almost sixty years spent helping landowners manage, sell, buy, improve and enjoy millions of acres — AFM dates itself to 1966, when Bartow S. Shaw, Jr. formed the predecessor firm Bartow Shaw and Associates. It states a size threshold for the land management work in its own words: property of fifteen acres or more. The published service lines run well past timber alone — timber sales and timber management, reforestation and silviculture, forest inventory to establish volumes and values, wildlife services and habitat restoration, environmental services, forest carbon, land surveying, wood flow for navigating fibre supply agreements, farmland management through AFM Ag Services, and forestry and property accounting handled by a dedicated team of about twenty including CPAs on staff, covering property tax administration, audit support and hunt lease administration. Forest certification is offered too: the firm says management operations are conducted under FSC, SFI and ATFS guidelines. As described on americanforestmanagement.com, read 22 September 2026.

Forest Land Resource Consultants, PLLC keeps a post office box address in West End, in Moore County, and the directory records coverage across twenty-two counties of the Sandhills and central piedmont, running from Richmond and Scotland north through Randolph and Guilford to Orange and Durham. The firm's own site presents it simply as offering professional forestry services and says it offers a full variety of services to meet any forestry need. Its services page lists timberland sales and acquisitions, timber investment analysis, and timber marketing covering sales, harvest planning, site preparation and reforestation. It also lists timber appraisals and cost basis appraisals, forest management plans, GIS and GPS mapping, burn plans and prescribed burning, herbicide recommendations and application, expert witness testimony, and hunting lease management. The site carries the line Growing a Future for Forestry and invites landowners to use its contact form to discuss their forestry needs. No founding year, staff count or minimum tract size is published anywhere on the site. As described on forestlandrc.com, read 22 September 2026.

Dargan, King, and Knight LLC is a forestry consulting firm based in Darlington, South Carolina. They work as timberland brokers too, handling both the timber and the land itself for owners who need one or the other, or both. Their work covers the full range: forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, insect, disease and fire protection, prescribed burning, forest real estate, recreation management, forest taxation, utilization and marketing, wildlife management, and stewardship plans. On the timber side they've handled species like pine sawlogs, red oak, cherrybark oak, and cypress, and they also plant longleaf seedlings as part of reforestation work. They hold a N.C. Registered Forester license, #1561. They serve Anson, Bladen, Brunswick, Columbus, Hoke, Richmond, Robeson, and Scotland counties. There's no stated minimum acreage, but the smallest job shown on their pages is a tract called the O'Bryan Tract, listed at approximately 128 acres. That suggests their work tends toward larger tracts rather than small home lots. Their own words on a timber sale: they say they are "confident that we generate the most timber sale revenue possible for the landowner, while ensuring a quality logging job," and that the goal is for "each tree to reach its highest potential value market." This firm fits a landowner with a sizable tract, especially one who also wants help with the land itself, through sale, appraisal, or long-term management, not just a one-time timber cut. From dkkforestry.com, read 10 October 2026.

Registration number 335 puts this firm's oldest credential ninth-oldest of the 178 registrations on the state register — one of the longest tenures in North Carolina consulting forestry. Two registered foresters, twenty-seven counties covering the southern and central piedmont from Mecklenburg and Gaston up through the Triad, with the Sandhills along the bottom edge. Seventeen services: urban forestry, forest taxation and environmental impact statements on top of the appraisal, cruise and sale-administration trio. Memberships in ACF, SAF, the N.C. Forestry Association and the Forest Landowners Association — an unusually deep set.

Kiker Resource Management works out of Wadesboro, at the centre of a thirty-six county North Carolina territory that runs west to Cleveland and Gaston, north through Mecklenburg, Iredell, Durham and Granville, and east across the Sandhills to Brunswick, New Hanover and Pender. Its own site casts the practice wider still, describing work throughout the southeastern United States including Virginia and South Carolina, with a second office at Anderson, South Carolina. The home page sums the firm up as 'forest resource management, wildlife management consulting services, land sales', and it publishes service pages for timber sales, forest and land management, reforestation, prescribed burning, hunting leases, mapping and technical services, wildlife management consulting, forest certification and real estate. The forest and land management page says KRM starts every job by learning the landowner's objectives, whether that is long-term management of high-yield pine plantations, wildlife habitat improvement, a one-time harvest or outdoor recreation, then inventories species composition, stand origin, acreage, site quality and stocking before writing a plan carrying timber value estimates, harvest schedules and cash flow estimates. The reforestation page is the most detailed: KRM reforests an average of 2,500 acres a year for clients, buys about 1.5 million genetically improved seedlings annually, keeps an employee with the planting crews full time for quality control, and puts its herbicide and tree planting work out to bid each year. Its history page dates the practice to June 1978 under a predecessor name, Kiker Forestry and Realty, Inc., with the present LLC formed when Jason Kiker bought the firm in 2007, and counted ten full-time and two part-time employees in 2023, among them eight graduate foresters. The firm also holds an FSC group certificate and takes part in the American Tree Farm System. As described on kikerforestry.com, read 23 September 2026.

Plank Road Forestry, LLC is a forestry consulting business in Wadesboro, North Carolina. They work with private landowners on timber and land management, and they also do utility vegetation work and forestry mulching. Their land management services include management plans, timber inventory cruising, timber sales, wildlife management, site preparation and planting, prescribed burning, and herbaceous weed control. On the forestry side they also handle reforestation, timber stand improvement, timber appraisal, timber sale and contract administration, prescribed burning, environmental impact statements, stewardship plans, and insect, disease and fire protection. Their mulching and clearing work covers right-of-way and land clearing, invasive species control, and hazard tree identification. They say their land management approach has "a long history of helping private landowners plan and implement the best strategies for the use of their land." Their team includes a N.C. Registered Forester, ISA Certified Arborists, and ISA Utility Specialists. They serve a wide stretch of counties, including Anson, Cabarrus, Mecklenburg, Union, Richmond, Rowan, and Moore, among others. Plank Road Forestry was founded in 2011. Much of their site centers on utility vegetation management and right-of-way work, with timber sales for private landowners as one part of their land management services. This outfit may suit a landowner who wants a forester who also understands utility and right-of-way issues, not just a straightforward timber sale. From plankroadforestry.com, read 10 October 2026.

Surveying is the unusual one on the register here. Most firms on it cruise timber; this one also runs boundary lines, so a disputed corner and a volume estimate can be handled on the same visit. Coverage is eighteen counties across the southern piedmont and into the Sandhills, from Union and Mecklenburg east through Montgomery and Moore to Harnett and Robeson, and the registered list of sixteen services takes in appraisal, cruising and sale administration alongside prescribed burning, herbicide application and wildlife management, with registration 1686 held by Jeff Boothby. The firm's own site shows something larger than a single-forester entry. Woodsmen Forestry, whose standing line is managing timberland with integrity since 2010 and which appears in one staff biography as Woodsmen Forestry, PLLC, names three people and two offices: Boothby as president and chief executive at the home office at 102 South Greene Street in Wadesboro; Lewis B. Evans, who joined in 2015 as vice president after a career in insurance; and Gregory Allen, mountain region and timber sales director, a registered forester in North Carolina since 2012 and in South Carolina since 2014 who spent ten years in timber procurement before joining, and whose mountain region office at 266 Oak Avenue in Spruce Pine opened in 2021. The firm calls its offering Timber Wealth Management and says its management base covers tens of thousands of acres in the Carolinas, Virginia and parts of eastern Tennessee. Published services include forest management consultation, sealed-bid and negotiated timber sales, timber appraisals for real estate investing, North Carolina present-use tax plans, forest stewardship plans, tree planting and site preparation planning, state and federal cost-share assistance, GPS and GIS mapping, timber investment planning, invasive species control and wildlife habitat improvement. On sales it describes a turnkey service covering planning, marketing, pre-harvest preparation, logger oversight, cleanup, settlements and replanting, and says it is paid out of what the landowner is paid. A separate exports and industrial division works on procurement and export marketing for forest products facilities. As described on woodsmenforestry.com, read 23 September 2026.

Union and Mecklenburg east through Anson and Stanly to Moore, Scotland and Robeson: eleven counties across the southern piedmont and the Sandhills, with the office at Polkton in the middle of them. Fourteen services is a fuller list than most firms working an area this size — prescribed burning, herbicide application, logging engineering, forest taxation and recreation management sit alongside the appraisal, cruise and sale administration a timber sale actually needs. SAF member.

The office is in Florence, South Carolina — over the state line — and the North Carolina coverage is a tight eight counties in the southeast, from the Robeson and Scotland sandhills out to Brunswick and Pender on the coast. Ten services, a narrow list by register standards: management plans, reforestation, stand improvement, prescribed burning, and the full appraisal, cruise and sale-administration set a competitive timber sale needs. The firm is a member of the Association of Consulting Foresters, whose rolls are open only to full-time consultants. No website is listed.

Four services on the register — management plans, herbicide application, wildlife management and stewardship plans — and that is the entire list. Worth knowing before you call: timber appraisal, cruising and sale administration are not among them, so this is not the listing to run a competitive timber sale through. It is habitat and management-plan work, across eight counties in the Sandhills and the Uwharrie region.

The office is in Florence, South Carolina, across the state line — but the register lists ten North Carolina counties, running from Anson and Richmond through the Sandhills and down to Columbus and Brunswick on the coast. Appraisal, cruising and sale administration are all here, which is the set a landowner needs to take a standing tract to a competitive sale. Reforestation, herbicide application, forest real estate and wildlife management fill out a nine-service list. No website is listed.

Fourteen counties centered on the Uwharrie country — Montgomery, Randolph, Stanly, Moore — reaching west to Iredell and Cabarrus and south into Richmond and Scotland. Compact regional coverage with the full sale package behind it: appraisal, cruise, and administration of the sale itself. Prescribed burning and logging engineering are both listed, which is a working-woods combination rather than a paperwork one. No website is recorded.

Registration number 208 is the fifth-oldest on the state register, a tenure very few listings can match. Thirty-six counties spread across the central piedmont, the Sandhills and the inner coastal plain, from Rockingham and Caswell on the Virginia line down to Scotland and Robeson. Eleven services, a focused list: appraisal, cruise and sale administration, reforestation, timber stand improvement, herbicide application, forest real estate and stewardship plans.

Eighteen services puts this listing in the top tenth of the register for breadth: appraisal, cruising and sale administration at the core, then prescribed burning, herbicide application, wetland delineation, forest real estate, taxation and urban forestry layered on top. Coverage runs to twenty-six counties across the southern piedmont and Sandhills, from Mecklenburg east to Johnston and down into Cumberland and Robeson. The Association of Consulting Foresters, which takes full-time consultants only, is listed. The registration itself is a recent one.

Eleven counties in the southeastern coastal plain — Columbus, Bladen, Robeson and the tier around them, out to Brunswick and New Hanover. That's a tight working radius rather than a statewide operation, which is the point if your tract is down there and you'd rather deal with someone who already knows the local mills. Appraisal, cruising and sale administration are all on the register, so the full sale can be run from one desk, and prescribed burning, herbicide work and wildlife management round out the list.

Land, Farms & Timber, Inc. is based in Lake Waccamaw, North Carolina, and is listed as a forestry consultant, also doing timberland brokerage. Its register entry lists forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimate, timber sale and contract administration, prescribed burning, forest real estate, recreation management, and utilization and marketing. It states N.C. Registered Forester #586. It serves a long list of North Carolina counties, including Bladen, Columbus, Robeson, Sampson, Duplin, Cumberland, Johnston, Moore, Richmond, Scotland, Stanly, Union, Anson, Montgomery, Chatham, Lee, Harnett, Hoke, Rockingham, Alexander, Alleghany, Ashe, Avery, Burke, Caldwell, Watauga, Wilkes, Beaufort, Carteret, Craven, Dare, Hyde, Jones, Lenoir, New Hanover, Onslow, Pamlico, Pender, Pitt, Tyrrell, and Washington. This fits a landowner in eastern or western North Carolina who wants someone offering both forestry consulting work, such as a timber cruise or a management plan, and help selling forest real estate, under one listing. From advancelandandtimber.com, read 10 October 2026.

Yadkin Forestry & Realty has been serving landowners since 1997, and the practice pairs forestry consulting with real estate — the site points visitors to an affiliated brokerage at YadkinRealEstate.com. Its stated objective is to work closely with landowners to protect and promote their interests in forestry and land-related practices, with a consulting forester who stays current on market trends so clients get the best value from their forestry investments. Todd Dowdle is described on the about page as a Registered Forester in both North and South Carolina, a Certified Arborist with the International Society of Arboriculture and a licensed North Carolina Real Estate Broker, holding a bachelor's degree in Forest Resource Management from NC State University along with study in Forest Resources at Penn State University and business management. The firm's own service list runs to timber sales and appraisals, reforestation, acquisition tax basis work, pine thinning, prescribed fire, timberland sales and acquisition, management plans, boundary maintenance, GPS/GIS mapping and real estate sales and acquisition, with further pages on insect control, herbicide and fertiliser, wildlife and recreation, tax incentives and forest economics. On timber sales it describes advertising the sale, securing and evaluating bids, preparing and enforcing contracts, and pre-planning and managing the logging operation, and it frames management planning as aiming at the highest economic return while potentially reducing annual county land taxes. On reforestation it makes an explicit case for genetically improved loblolly: a naturally regenerated hardwood stand typically produces around 50 to 60 mature trees per acre by 60 to 70 years of age, while improved loblolly seedlings can yield 110 to 120 mature sawtimber trees per acre on a 30 to 40 year rotation. Affiliations named on the site are the Association of Consulting Foresters of America, Society of American Foresters as a Certified Forester, the International Society of Arboriculture as a Certified Arborist, the Tree Farm Program as an inspector, and the NC Forestry Association. The register territory is thirty-seven counties across most of the piedmont — Mecklenburg and Wake at either end, Randolph and Davidson in between — climbing into the northwestern mountain counties of Ashe, Alleghany, Avery and Watauga; the firm's own pages describe the practice in terms of North and South Carolina rather than a county list. (source: yadkinforestry.com, read 22 September 2026)

Sixteen services is a wide list by the register's standards, and this one stretches from prescribed burning and herbicide application to wetland delineation, logging engineering and forest taxation. Appraisal, cruising and sale administration are all included, so a whole sale can be run in one place. Coverage is sixteen counties centred on Randolph and Guilford in the central piedmont and reaching south through Moore and Scotland into the Sandhills, with ACF and SAF membership recorded and registration 1702 held by Philip M. Mead. The firm's own site fills in the history the register does not carry. Henderson Forestry Consultants says it was founded in 1984 by David C. Henderson, and that in 2021, when Henderson retired, his son-in-law Philip M. Mead took on ownership and operations; the business remains privately owned, is headquartered in Asheboro, and says it serves clients across North Carolina, South Carolina and Virginia. Its published service list runs to forest management plans, timber sales, real estate services, timber inventory and appraisals, GIS and mapping, reforestation, site preparation, timber stand improvement, forestry programmes and certifications, timber tax planning, and property protection, under which prescribed fire, boundary maintenance and fire-line installation sit as answers to trespass, timber theft and wildfire. The firm sets out what one of its management plans contains: landowner goals, stand-by-stand mapping of timber type, age and acreage with hydrology, soils and satellite imagery, current stand conditions, future management areas, a schedule of silvicultural operations, environmental measures, monitoring metrics and cost-share recommendations, and it says its plans satisfy the requirements of the Present-Use Value tax deferral programme. On sales it describes a free initial inspection, an inventory and appraisal setting a minimum acceptable market value, field work and boundary marking, contractor supervision by unannounced inspection, and marketing to vetted timber procurement organisations, drawing on a year-round regional price database. As described on hfcforestry.com, read 23 September 2026.

Twenty services, the top of the state's A–U list and a wider spread than 98 percent of firms on the register. Surveying and wetland delineation sit next to appraisal, cruising and sale administration, so a boundary question or a stretch of wet ground can be handled by the same firm running the timber sale. Forest taxation and forest real estate are on there too. The office is across the line in Conway, South Carolina; the sixteen NC counties served run through the southeastern coastal plain and the Sandhills.

Daniel W. Edwards, Consulting Forester P.A. is a forestry consulting and timberland brokerage based in Asheboro, North Carolina. Dan Edwards works with landowners on timber and land matters across North Carolina, South Carolina and Virginia, with named service counties in North Carolina that include Randolph, Davidson, Forsyth, Guilford, Wake, Chatham, Orange, Durham, Johnston, Moore, Richmond, Robeson, Rowan and others. The work covers forest management plans and mapping, timber appraisal, timber cruise and volume estimate, timber sale and contract administration, insect, disease and fire protection, forest real estate, forest taxation, and utilization and marketing. Species worked with include loblolly pine, longleaf pine, yellow poplar, white oak, hickory, maple and gum. On a timber sale, the approach covers "timber valuation, buyer selection, sale preparation, contract terms, boundary considerations, harvest oversight, and post-harvest recommendations." For land purchases, Dan will "evaluate potential land purchases with regard to timber value, soils, local market values, and potential problems." No stated minimum acreage was found. The smallest job shown is +/- 23 Acres in Davie County, listed for sale. Dan Edwards holds N.C. Registered Forester #612 and is a licensed real estate broker in North Carolina. The business states over 40 years of experience. This fits a landowner in North Carolina, South Carolina or Virginia who wants one person to handle both the timber side and a possible land sale, rather than juggling a forester and a broker separately. From dedwardsforester.com, read 10 October 2026.

Tugwell Consulting Forestry, P.A. is a consulting forestry firm based in Asheboro, North Carolina. They work with landowners, private industry, and government agencies, handling timber inventory and appraisals, timber sales, forest management plans, timber harvest recommendations, thinnings, and reforestation. They also offer real estate services for timberland. Their work covers the full range a landowner might need: forest management plans and mapping, timber cruising and volume estimates, timber sale and contract administration, logging engineering, timber stand improvement, prescribed burning, wetland delineation, and wildlife management, among other services. The firm holds N.C. Registered Forester credential #775, and says it is "home of the 2016-2018 President of the Association of Consulting Foresters of America, Inc." They describe over 35 years of forestry experience. They are based in the center of North Carolina and serve landowners across a long list of counties, including Randolph, Guilford, Davidson, Chatham, Moore, Wake, Montgomery, and Richmond, among many others, and say they also travel into surrounding states to reach clients. Tugwell describes itself as "a privately owned business located in Asheboro, NC specializing in property management and timber investments," working with owners who want to raise property value, grow timber value, build a sustainable asset, or improve wildlife habitat. This fits a landowner anywhere in central North Carolina who wants one firm to handle the whole process, from walking the tract and writing the management plan through to running the timber sale itself, rather than hiring separate people for each step. From tugwellforestry.com, read 10 October 2026.

Registered in North Carolina, but the office is across the line in Camden, South Carolina. Coverage runs to the far western end of the state — Cherokee, Clay, Graham, Swain — up through Buncombe, then east to the Charlotte piedmont and the Sandhills. Thirty-two counties. Appraisal, cruising and sale administration are all listed, plus logging engineering, which counts on steep ground.

Southern Palmetto Environmental Consulting, LLC is based in Myrtle Beach, and is registered as a forestry consultant covering a list of North Carolina counties: Bladen, Brunswick, Chatham, Columbus, Cumberland, Duplin, Harnett, Hoke, Johnston, Lee, Moore, New Hanover, Pender, Richmond, Robeson, Sampson, and Scotland. The forester holds N.C. Registered Forester #1433. The work on offer is broad. On the forestry side it covers forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimate, timber sale and contract administration, insect, disease and fire protection, prescribed burning, timber harvesting and marketing, site preparation, thinning, and pine straw management and marketing. Beyond timber, it also handles wetland consulting, with assessments, delineations with USACE verification, 404 permitting, mitigation design and implementation, and critical area dock permits, plus endangered species consulting, wildlife management, recreation management, herbicide application, environmental impact statements, stewardship plans, and forest real estate work. In its own words, "SPE works with landowners to provide environmental solutions to common and uncommon issues." There's no stated minimum acreage, so this looks like a fit for a landowner whose needs go beyond a straight timber sale, someone also dealing with wetlands, wildlife, or a protected species question on their land, alongside the usual forest management and harvest work. From southernpalmettoenvironmental.c, read 10 October 2026.

Every service the state's A–U schedule covers is on this record — all twenty, more than 98 percent of firms on the register. So the timber-sale core of appraisal, cruise and sale administration sits alongside surveying, wetland delineation, prescribed burning, Christmas tree management and urban forestry. A landowner with a boundary question or a wet corner can get both answered on the same visit as the cruise. Coverage spans forty counties, from the north-central piedmont down through the sandhills and out to the southeastern coast. Memberships in the Society of American Foresters and the International Society of Arboriculture are recorded; no website is.

Fifty-eight counties is a big footprint — wider than nine out of ten firms on the register — and it stretches from the mountain counties around Watauga and Avery clear across the piedmont into the inner coastal plain at Wayne, Greene and Edgecombe. Two registered foresters, so the work does not stall if one is booked. Appraisal, cruising and sale administration are all listed, and unusually the firm pairs woodland work with urban forestry and an arboriculture credential, which matters if the tract sits on the edge of a growing town.

The office is in Charlottesville, Virginia, a good way over the state line, but the North Carolina coverage is nothing marginal: 64 counties, wider than 93 percent of firms on the register. That takes in the whole piedmont and coastal plain east of the mountains, from Currituck and Brunswick inland to Surry and Rockingham. Two registered foresters, fifteen services — wetland delineation and environmental impact work sitting alongside the appraisal, cruise and sale-administration set — and ACF membership. The company website is a corporate one and says nothing about any particular North Carolina office or county: it states only that F&W's foresters are located throughout the United States, South America and Europe, and points visitors to a find-your-local-forester map. What it does set out is the firm behind the local contact. F&W says it was founded in 1962 by Eley Frazer and Frank Wetherbee, is headquartered in Albany, Georgia, and manages millions of acres of forestland worldwide; its published timeline runs from regional inventories and forestland appraisals in the 1970s, through growth from 25 employees in two states to 100 in eight states during the 1990s, to expansion into Uruguay and Brazil and the Tree Farm Group certification in the 2000s and the acquisition of Fountains US and UK in 2016. Eight service lines are published — timber sales, property management, field support services for TIMOs and REITs, forest inventory and mapping, forestland accounting, technical and analytical work, real estate, and natural capital. On timber sales specifically the firm describes pre-harvest valuation reporting on species, age and condition, sale layout and marketing to match timber to the best market, then on-site harvest supervision: harvest inspections and reporting, streamside management zone delineation, BMP compliance audits, timber marking, boundary re-marking and road maintenance oversight, with Phase I Environmental Site Assessment available during property transactions. As described on fwforestry.com, read 22 September 2026.

R.B. Klass Forestry Services, based in Cary, North Carolina, is listed as a forestry consultant and also as a timberland broker. The work on offer covers forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, logging engineering, forest real estate, forest taxation, and utilization and marketing. Its own pages describe building land management plans, "usually covering 10 years or more," based on an analysis of timber stands and what the landowner wants. It works in pine and hardwood, and also pine straw. Thinning work ranges from pre-commercial thinning in young pine stands to commercial pulpwood thinning, crop tree release, and commercial improvement cuts in hardwood and mixed stands, with trees marked by hand depending on the age, size, and stocking of each stand. Reforestation work includes site preparation, seedling selection, and cost share paperwork, and it says it searches out "the best genetically improved seedlings on a tract-by-tract objective basis." It also offers Tree Farm certification, prescribed burning, wildlife habitat work, and hunting lease negotiation. It serves Bertie, Camden, Chowan, Currituck, Edgecombe, Franklin, Gates, Greene, Halifax, Hertford, Martin, Nash, Northampton, Pasquotank, Perquimans, Pitt, Warren, Wayne, and Wilson counties. It holds an N.C. Registered Forester credential (provisional), #472, and has been "helping landowners reach their goals since 1983." The smallest job shown on its pages is the Linden Tract on the Lower Little River, a roughly 306 acre property, which gives a sense of the scale it has handled. This suits a landowner with a larger timber tract who wants a full management plan built around it, not just a quick one-off sale. From ncforester.com, read 10 October 2026.

Every county in North Carolina is listed against this firm — all 100 — which puts it in the small group on the register that will work anywhere in the state. The service list is narrow by comparison: ten entries, built tight around the sale itself, with appraisal, cruising and sale and contract administration at the middle and forest taxation, utilization and marketing, urban forestry and stewardship plans around them. Both ACF and SAF memberships are recorded. One registered forester covers that ground, which is worth knowing when you're arranging a visit.

Effectively the eastern two-thirds of the state: sixty-eight counties covering every county on the coastal plain and most of the piedmont, which puts this among the widest-reaching listings on the register. Two registered foresters, the older registration numbered 914. The sale trio is present — appraisal, cruise, contract administration. Surveying is on the service list as well, alongside forest real estate and urban forestry, so a boundary or title question does not need a second firm. On its own site the business trades as Carolina Forestry & Realty, a privately owned professional corporation held by co-owners Keith Brouillard and Rodney Finkbiner and recognised by the N.C. Board of Registration for Foresters as a Professional Forestry Company, working in North Carolina and Virginia and claiming more than 30 years of it. Timber is sold for the landowner on a lump-sum sealed-bid basis, the site saying a sale can draw five to ten bids, after an appraisal done by cruising on larger even stands or by tree count on small or irregular ones. Beyond the sale it lists timberland investment analysis, comprehensive management plans with growth-and-yield and economic projections, pulpwood and residential or development thinnings, disease and pest management, property tax reduction, damage and trespass appraisals and boundary line maintenance. The forestry side sits next to a working rural land brokerage: both owners are licensed brokers and Realtors and the firm publishes its own listings, so a landowner deciding between selling timber and selling the tract can put both questions to the same office. As described on carolinaforestry.com, read 22 September 2026.

Seven registered foresters is the top of the range on the state register, and it comes attached to eighty-four counties — mountains to the Outer Banks, with very little of North Carolina out of reach. Scale like that means a landowner isn't waiting on one person's calendar, and it means the firm doesn't vanish when someone retires. Nineteen services: wetland delineation, environmental impact statements, forest taxation and urban forestry, alongside the appraisal, cruise and sale-administration combination a competitive timber sale actually runs on. ACF and SAF. The firm trades as GFR Forestry Consultants and dates itself to 1964, and it works from four North Carolina offices — Raleigh, Lillington, Tarboro and Lake Waccamaw — with its published service area running beyond the state line into South Carolina, Virginia, Maryland and the Eastern Shore. Its own account of a timber sale runs from stand assessment through a sale announcement and marketing plan to bid management, handled by foresters it says keep current on local buyers, pricing and competition; on the management side it names timber inventory and valuation, timber trespass analysis, forest management planning, GIS mapping, boundary line location and maintenance, pulpwood thinning, pest and disease control, fire protection measures and hunt and lease management. Two services sit outside the usual consulting list: timber basis determination and tax planning for estates and long-held family land, and wood flow and logistics work for landowners or businesses moving product to buyers. It also runs a rural real estate side, brokering timberland, hunting and agricultural tracts through licensed N.C. brokers. As described on gfrforestry.com, read 22 September 2026.

Rudd Forestry, PLLC works out of Raleigh, and the directory records coverage of forty-six counties reaching from the Rockingham and Forsyth line east through the Triangle out to Pitt, Onslow and Pender. The firm says its aim is to help landowners achieve their goals for their forestland, and that it works in North Carolina and Virginia. Its services page describes tailored management plans for forest health and long-term sustainability, timber appraisal covering volume, value and forest health, planning and management of timber sales and harvests, site-specific reforestation, boundary line marking, property security against trespassing, theft and poaching, GIS mapping, hunt lease management, wildlife habitat improvement, forest conservation, outdoor recreation planning, and help buying and selling North Carolina farms and timberland. Owner Thomas Rudd holds a forest management degree from North Carolina State University and states sixteen years as a consulting forester and fourteen as a licensed North Carolina real estate agent, together with arborist certification, a drone certification and standing as a certified tree farm inspector. As described on ruddforestry.com, read 22 September 2026.

Forty-seven counties is wide coverage by any measure — more than double what the median firm on the register carries — and this footprint runs from the Uwharries and the Charlotte-to-Triad piedmont north to the Virginia line and west into Wilkes, Watauga, Ashe and Avery, with a southern arm through the sandhills at Hoke, Scotland and Cumberland. Sixteen services, the complete sale set among them: appraisal, cruise, sale administration. Wetland delineation and urban forestry on the same list is a less common pairing.

This firm holds one of the twelve oldest registrations on the North Carolina register, out of 178 — a long stretch on the state list. The office is in Manning, South Carolina, and the North Carolina territory runs twenty-eight counties, from Mecklenburg and Iredell through the Sandhills and down to the Brunswick and New Hanover coast. Fifteen services, including logging engineering, wetland delineation and stewardship plans, and the full sale sequence: value the stand, cruise it, administer the sale. Association of Consulting Foresters membership puts consulting at the center of the business.

The office is over the state line in Rock Hill, South Carolina, but the coverage is anything but local — 48 North Carolina counties, from Union and Mecklenburg up through the Triad and out west as far as Madison, Mitchell and Yancey. Appraisal, cruising and sale administration are all recorded, the set needed to run a competitive sale end to end. ACF membership marks this as full-time consulting work. Twelve services in total; no website on the register.

Timber Marketing and Management of the Carolinas, Inc. is the forestry side of a Raleigh practice whose site now carries the TMM Real Estate LLC name, and its forester, Edwin E. Orr, holds N.C. Registered Forester number 477 - the fifteenth-oldest of the 178 registrations on the state register. The service area is broad to match: thirty-nine North Carolina counties running from Caswell and Stokes on the Virginia line, through the Triangle and the sandhills, down to Brunswick and the coast. The company's own account says the business has roots in land sales going back to the early 1980s, when Timber Marketing & Management of the Carolinas Inc. was selling rural farms and timberland properties, and that sales today take in a wider range of property, including transitional, residential development, recreational land and timberland. Its timber sales page says the sale of timber is the most critical time for a landowner to get professional advice, and describes the firm helping an owner decide which trees to sell and when, making intensive inventories, setting sale conditions to protect the property, checking the sale against government regulations, advertising and marketing it, accepting bids or negotiating offers, overseeing preparation of the timber deed, closing, and inspecting the harvesting operation; logging inspections are carried out on every sale it handles. The inventory and appraisals page says cruises are run by plot sampling, strip sampling, point sample or 100 percent marking, from light-intensity sample cruises up to estimates in which every tree is measured and marked. Timberland management plans are built on inventory and growth data, carry timelines and income and expense projections, and draw on experience in natural pine, plantation pine and hardwood, implemented through the firm's own employees and independent contractors. Growth studies and yield projections, reforestation, annual property inspection for absentee owners, boundary line maintenance and mapping complete the list. As described on tmmoc.com, read 23 September 2026.

All 100 counties, which only a handful of firms on the state register can claim — wherever the tract sits in North Carolina, this one covers it. Two registered foresters, and the older of the two registrations is number 482, sixteenth-oldest of the 178 on the register. Appraisal, cruise and sale administration are all here, so a landowner can value the stand, measure it and run the sale through to contract in one place. Seventeen services in all, out as far as Christmas tree management, urban forestry and forest taxation. The firm holds Association of Consulting Foresters membership, which is limited to full-time consultants. The firm calls itself family owned and says it has run a consulting forestry business for over 40 years; William H. Lock has retired from full-time forestry work and his son Jonathan C. Barnes, who passed the state forestry exam in 2002, now runs the company as president. Alongside state registration in both North Carolina and Virginia it claims Certified Forester and Certified Arborist credentials, Tree Farm Inspector status and Technical Service Provider approval for NRCS cost-share programs, and it offers work turn-key — timber inventory, marketing, harvest inspection and reforestation through one office — plus timber tax basis estimates, timber trespass reports, growth models for income projections and landowner seminars and field tours. Real estate is the one thing it has pulled back from: the site says that side is now limited to advice and referrals rather than listing and selling land. Its public timber sale notices, bids taken sealed at the office, run from 2010 through 2021 and cover tracts from a few acres up to about 280, clustered in Rockingham, Guilford, Alamance and Caswell counties and over the line into Henry and Pittsylvania counties, Virginia. A first consultation is offered free. As described on whlock.com, read 22 September 2026.

Registration 392 is the tenth-oldest entry on the North Carolina register, about as long a tenure as this directory contains. Coverage runs seventy counties — the entire mountain west, the whole piedmont, and down through the sandhills to the southeastern coast, stopping short only of the northeastern corner. Thirteen services, including appraisal, cruising and sale administration, plus forest taxation, forest real estate and prescribed burning. For a landowner whose sale is tangled up with an estate or a tax question, that last combination is the point.

3D Land Group, Inc. is a forestry and land consulting business run out of Pawleys Island. It works with private landowners as well as forest product companies and timberland investment groups "throughout the Southeast." The work covers full forest management plans and mapping, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, and logging engineering. It also handles reforestation, timber stand improvement, prescribed burning, road construction and maintenance, mulching, and land clearing, plus wetland delineation, wildlife and recreation management, and real estate brokerage for land. Dan Stuckey, the president, brings 30 years in forest management, wood procurement, and land investment, and the firm says it works to achieve "top of the market" pricing for timber sales. Credentials listed include Registered Forester status in North Carolina, South Carolina, and Georgia, SAF Certified Forester, and Broker-in-Charge licensing in all three states. The firm is active in the Forestry Association of South Carolina. It has operated since 2018. On the North Carolina side, counties served include Anson, Cabarrus, Catawba, Chatham, Cleveland, Columbus, Cumberland, Duplin, Gaston, Harnett, Hoke, Iredell, Johnston, Lee, Lincoln, Mecklenburg, Montgomery, Moore, New Hanover, Pender, Richmond, Robeson, Rutherford, Sampson, Scotland, Stanly, and Union. This fits a landowner who wants more than a timber sale handled, someone thinking about roads, wildlife habitat, conservation, or eventual development alongside the trees, and who wants one firm that can broker the land too. From 3dlandgroup.com, read 10 October 2026.

Registration 513 sits seventeenth-oldest on the state register, and the firm holds Association of Consulting Foresters membership — ACF admits full-time consultants only, so it signals this is the business rather than a sideline. The office is in Blythewood, South Carolina, but the NC Forest Service register credits sixty-two North Carolina counties: the mountains, effectively the whole piedmont, the sandhills and the southeastern coast. Fourteen services, with appraisal, cruising and sale administration at the center and forest taxation, forest real estate and stewardship planning around them.

Three Rivers Land Trust appears on the N.C. Forest Service consulting forester register, which credits it with a broad service list — forest management plans and mapping, reforestation, timber stand improvement, timber sale and contract administration, insect, disease and fire protection, prescribed burning, recreation management, herbicide application, wildlife management, urban forestry and stewardship plans — across fifteen counties from the central Piedmont through the Uwharries and down into the Sandhills. A landowner should know before calling that the organisation's own website describes something different. It presents itself as a non-profit conservation land trust, not a consulting forestry practice for hire. Its site states that it works with private landowners and public agencies “to conserve the most important natural, scenic, agricultural, and historic places in a 15-county region of the Piedmont and Sandhills of North Carolina,” and that since 1995 it has worked “to offer reasonable and attractive options to landowners who want to conserve their lands and keep them undeveloped in perpetuity.” The stated mission is to work thoughtfully and selectively with property owners on natural areas, rural landscapes, family farms, scenic rivers and historic places. The work it publishes is conservation easements, land purchase and public access: the site reports 53,714 acres permanently conserved, 396 stream miles, 8,405 acres transferred to public recreation, 31,837 acres of wildlife habitat, 21,582 acres of local farmland and 3,968 acres conserved for national defense near Fort Bragg. It also runs a Sportsman Access Program and a Habitat Enhancement Lands Program, and is campaigning to buy Alcoa-owned land on the Tuckertown Reservoir to keep it open as game lands. No timber sale, cruise or appraisal service is advertised anywhere on the site, and the site names no forester; the registration the register carries is the authority for that side of the entry. The office is at 204 East Innes Street in Salisbury, open Monday to Friday, 8am to 5pm. As described on trlt.org, read 23 September 2026.

Eastern Forest Consultants describes itself as a professional forest consulting firm serving the eastern United States, based in Clemmons with an additional office in Christiansburg, Virginia. Its primary client is the non-industrial private forest landowner, and the firm says it has found a niche providing services for landowners with relatively small projects, starting with a free initial consultation and a site visit with a forester. Its argument to owners is that active management beats letting a stand develop naturally, yielding greater returns in less time, and that neglect carries real risk from catastrophic wildfire, invasive species and forest pests, whether the objective is income, wildlife, hunting or long-term stewardship. It recommends a management plan that is kept current and actually executed. Published services include timber sales, timber inventory, management plans, herbicide application, tree planting, boundary line recon and painting, crop tree release, pre-commercial thinning, forest road layout, GPS and GIS mapping, and timber trespass resolution. The firm also contracts its crews to other consultants and agencies on an hourly, daily or production basis, and maintains relationships with the North Carolina Forest Service, the Virginia Department of Forestry and the U.S. Forest Service. State registration covers fifty-one counties across the mountains and piedmont. As described on easternforestconsultants.com, read 23 September 2026.

Alliance Forestry, Inc. is a forestry consulting business based in Dallas, North Carolina. The Dallas office, led by Brian Medlock, covers Western NC, SC, and VA. The company also has a branch in Tarboro, North Carolina, run by Mike Wittig, covering Eastern NC, SC, and VA. On the consulting side, the work includes timber sales, appraisals, inventories, forest management plans including Forest Stewardship plans, boundary line maintenance, and forest taxation assistance. The staff includes NC Registered Foresters, and the business holds N.C. Registered Forester #1124. They also do land clearing and site work, custom herbicide applications for utility companies managing rights-of-way, and forestry herbicide work by aerial, ground, and backpack methods, as licensed pesticide applicators in NC, SC, and VA. On the planting side, they put in over a million seedlings a year, including loblolly pine, longleaf pine, and a variety of hardwood species, with guidance on genetics, planting density, and seedling type. Mapping is handled through GIS and GPS work, and "Acreage determinations can be made in the office or the field." Wildlife management services cover food plots, prescribed burning, and removal of nuisance animals including beavers. This suits a landowner who wants one outfit that can run a timber sale, handle the paperwork and mapping, and also come back later for planting or herbicide work, rather than hiring out each piece separately. From allianceforestry.com, read 10 October 2026.

Milliken Advisors Inc. is a forestry consulting and timberland brokerage business in Columbia, North Carolina. It works with landowners on the kind of jobs that come with owning timberland, from planning a sale to planting trees back after a harvest. The work on offer covers forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, insect, disease and fire protection, prescribed burning, forest real estate, recreation management, forest taxation, utilization and marketing, herbicide application, and stewardship plans. The forester holds N.C. Registered Forester credential #1394. Milliken Advisors serves landowners across a long list of North Carolina counties, among them Wake, Mecklenburg, Guilford, Buncombe, and Dare. The business has been working with landowners since 1949. Its own description of how a job runs is plain: "Once we know what you want, we take a good look at your land: its current state, what's happening in the market, and what the future could hold. Then we build a strategy that actually fits your needs." On follow-through, it says "You don't have to worry about juggling contractors or chasing down deadlines." This fits a landowner who wants one firm to handle a timber sale or a management plan from start to finish, rather than piecing the work together themselves. From millikenadvisors.com, read 10 October 2026.

Membership in the Association of Consulting Foresters is the thing to notice here. ACF takes full-time consultants only, so this is the firm's actual business rather than something done around other work. Thirty-three counties, running from Guilford and Rockingham in the northern piedmont across the Triangle and down through the sandhills into Scotland, Robeson and Pender. Sixteen services, including prescribed burning, forest taxation and urban forestry, and the appraisal, cruise and sale administration set a competitive sale depends on.

All one hundred counties — one of the few listings on the register that covers the entire state. The registration here is number 8, the second-oldest of the 178 registrations on the register, which is about as long a tenure as North Carolina forestry has to offer. Beyond the sale work of appraisal, cruise and contract administration, this firm surveys, so a boundary question and a timber cruise can be settled on the same visit. Christmas tree management, wetland delineation and environmental impact statements are also listed.

Statewide coverage — all 100 North Carolina counties — from an office in Gainesville, Georgia. Fifteen services are recorded, including the three that make a timber sale work: appraisal, cruising, and sale and contract administration. Prescribed burning, herbicide application, urban forestry and stewardship plans fill out the rest. The register carries this entry under the name US Forest Service, with one N.C. Registered Forester and no website given.

The N.C. Forest Service register carries Dougherty & Dougherty across sixty-three North Carolina counties, foothills through piedmont to coastal plain — but the firm is run from Georgia. The register address is a PO box in Athens, Georgia, and the North Carolina connection is Derek Dougherty's registration, number 1029, rather than a North Carolina office. Trading as Progressive Forestry, the firm's site states that it “manages forest land for private forest landowners in the Southeastern US” with staff it describes as “college-educated, field-trained, and licensed forestry professionals,” and says its experience spans forest management, real estate investment, research and tree breeding. Its timberland management page sets the services out in detail: property and annual inspections, timber inventory reported in tons, cords or thousand board feet by species and product class, timber appraisal, boundary line marking, prescribed understory burning, plantation establishment, seed source selection, mid-rotation work, GIS mapping, growth and yield modelling, harvest scheduling and forest investment analysis. It also answers a question the register leaves open. The register credits the firm with appraisal and cruising but not with sale administration; the site says the firm prepares and oversees the marketing and harvest itself, by negotiation or sealed bid, with lump-sum or per-unit payment and clear-cut, select-cut or thinning harvests, including logging inspections and its own timber security and tracking system. The firm states it is a certified Forest Stewardship Program plan writer in North Carolina. Hardwood is treated as a speciality: the site argues the South's hardwood resource sits “well below its potential” after a history of high-grading, and describes a system of site and stand evaluation aimed at regular production of grade hardwood. Species named across the site include loblolly, longleaf and slash pine, green ash, yellow poplar and eucalyptus. A consultation line covers audits, seedling advice and expert witness work on timber trespass overcuts and failed plantations. No founding year is published. As described on progressiveforestry.com, read 23 September 2026.

Peachland is the mill that takes what other yards turn away - gum, hickory, elm, hackberry and sycamore - cutting soft hardwoods into industrial timbers, cross ties and switch ties at a reported 16,000 to 18,000 board feet an hour. Edwards acquired the site in 2012; the parent company started in 1969 out of a dirt-floor chicken house in Marshville and now runs six North Carolina locations along with its own timber company and trucking arm. It is second-generation family owned and FSC certified company-wide. The NC Forest Service's Anson County register lists the Peachland mill as buying standing timber, hardwood grade logs, miscellaneous hardwood sawlogs and pine sawlogs, so a landowner sitting on a mixed, low-grade hardwood stand has a genuine outlet here.

Hunt Forest Resources, LLC is a timber buyer based in Moncure, North Carolina, with forestry consulting, firewood, and wood recycling run alongside it. They buy stumpage, sawlogs, pulpwood, and chip-n-saw timber in pine and hardwood, and they also handle forest management plans and mapping, timber cruise and volume estimates, timber appraisal, timber sale and contract administration, reforestation, timber stand improvement, prescribed burning, herbicide application, insect and fire protection, and wildlife and recreation management. Their registered forester holds N.C. Registered Forester #1438, and the company carries ProLogger and American Tree Farm System (ATFS) standing. They work across a long list of North Carolina counties, from Alamance, Durham, and Wake, through Chatham and Moore, down to Brunswick and New Hanover, and out east to Dare, Hyde, and Beaufort, along with many others. On their own pages they describe offering "a diverse range of services that span the entire lifecycle of forest products, from land and timber management to sustainable harvesting, real estate services, wood products manufacturing and beyond," and say they manage "7,000 acres of timberland annually" across four facilities in the state. This suits a landowner who wants one outfit that can buy the timber, write the management plan, and keep an eye on the ground afterward, rather than stitching together a buyer, a consultant, and a logger separately. From huntforestry.com, read 10 October 2026.

Corbett Timber Company is a timber buyer, logger, and forestry consultant based in Wilmington, North Carolina. They buy "every standing timber type", as well as soft hardwood logs for mills and other manufacturing use, and they work with Long leaf pine and Loblolly pine among other species. Their harvest work covers clear cut, row thinning, select thinning, residential thinning, seed tree, shelter wood, swamp logging, whole tree chipping, brush reduction, and fuel chipping. Past jobs include thinning on Long leaf pine and Loblolly pine plantations, and a residential thinning where a chipper was used to clear underbrush. Beyond the harvest itself, they offer timber appraisals, GIS mapping, marketing and merchandising advice, reforestation, and management plans, along with procurement services. Their staff includes Registered Foresters and Certified Tree Farm Inspectors. The business traces its timber brokerage work back to the mid-1980s, building on generations of logging before that. They serve New Hanover County. A minimum of 10 acres applies, stated on their contact page as "Property Location & Size (Minimum 10 acres required)". This fits a landowner with a mixed pine or hardwood tract who wants one company to handle the cut, the paperwork around it, and the replanting after, rather than hiring separate people for each step. From thecorbettcompanies.com, read 10 October 2026.

Piedmont Timber - Full Service Timber Company is a logging contractor in Greensboro, North Carolina. It has a Google Maps business listing in that category. It is also listed as a timber buyer and a consulting forester. A listing here is not an endorsement.

Canal Wood, LLC - Laurinburg is a timber buyer in Laurinburg, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber. It covers 18 counties, including Anson, Catawba, Chatham and Cleveland. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Cooper Bros Logging is a logging contractor in Laurinburg, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

3-D Footprints Logging, Inc. is a timber buyer in Pembroke, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 12 counties, including Bladen, Brunswick, Columbus and Cumberland. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Canfor Southern Pine-Conway is a timber buyer based in Conway, South Carolina, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Standing Timber, Sawlogs, Chip-N-Saw Logs and Lumber. It covers 8 counties, including Bladen, Brunswick, Columbus and Cumberland. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Cape Fear Forest Products, Inc. is a timber buyer in Erwin, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Veneer Logs, Pulpwood, Poles and Chip-N-Saw Logs. It covers 22 counties, including Alamance, Chatham, Cumberland and Duplin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Claybourn Walters Logging Co is a logging contractor in Fairmont, North Carolina. It has a Google Maps business listing in that category. It is also listed as a timber buyer. A listing here is not an endorsement.

Cotton Creek Chip Co is a mill in Star, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Two records, two different jobs. The NC Forest Service register lists Deberry Land & Timber as a timber buyer working twelve counties, while the IndustryNet business directory classifies the company under logging — by both SIC and NAICS code — and describes what it does as hardwood timber logging. IndustryNet also records a street address in Troy alongside the PO Box in the state register, and notes the company is not set up to receive email, so contact is by phone only. No website, no published reviews and no founding date were found.

Incorporated in April 1974, Elkins Sawmill is run by three officers who all share the family name. The Better Business Bureau rates it A+ — the company is not BBB accredited — and describes the product line as lumber, crossties, mulch and firewood, broader than the stumpage, sawlog and pulpwood purchasing the state register records. Besides the King Road mill in Moncure, the company also operates from an address in Goldston. It appears in the North Carolina Forestry Association's Buyer's Guide under timber buyers, though that guide carries non-member businesses alongside members, so membership should not be assumed.

Enviva Pellets Southampton, LLC is a timber buyer based in Franklin, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Chips, Pulpwood and Standing Timber. It covers 47 counties, including Beaufort, Bertie, Bladen and Camden. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Great Woods Companies LLC is a timber buyer based in Bennettsville, South Carolina, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Chips. It covers Anson, Richmond, Robeson and Scotland counties. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

H W Culp Lumber Co is a sawmill in New London, North Carolina. The family has run it since 1925, now in its third generation, cutting Southern Yellow Pine Lumber for wholesale customers. This is a mill, not a logging crew that comes out to walk your land. Logs are delivered to the New London site, where they're debarked, sawed, dried, and planed. Besides lumber, the mill turns out wood chips, sawdust, and bark as by-products. The company also handles wood procurement and trucking. Its lumber is heat treated and produced under TPI (Timber Products Inspection) certification, so it carries that grade guarantee: "Our products are certified by Timber Products Inspection to ensure our customers receive the grade quality they expect." Stanly County is named as an area served. This is a long-standing operation, sawing pine lumber "SINCE 1925," and it's a sizeable one, running a single-shift mill and producing a large volume of pine lumber a year for shipment to northern and western markets. For a landowner with Southern Yellow Pine to sell, H W Culp Lumber Co is worth knowing as a mill with deep roots in New London and a certification that backs up the grade of lumber it cuts, though it's set up to deal in wood procurement and volume rather than walking a small tract with you. From culplumber.com, read 10 October 2026.

The NC Forest Service timber buyers register is the only record that could be found for this company. It lists stumpage purchase and timber cruising across eleven counties in the central Piedmont, with a five-acre minimum tract — a smaller floor than some buyers will consider. Repeated searches turned up no website, no Facebook page, no directory profile, no reviews and no founding date, so nothing beyond the register entry has been independently confirmed.

Jeff Shaver & Sons, LLC is a timber buyer in Albemarle, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber. It covers 9 counties, including Anson, Chatham, Lee and Montgomery. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Mickey Blake is a timber buyer in Mount Gilead, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 8 counties, including Anson, Chatham, Lee and Montgomery. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Premier Timber Harvesting, LLC is a timber buyer in Bladenboro, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 19 counties, including Bladen, Brunswick, Chatham and Columbus. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Sheppard Wood Products Inc is a timber buyer in Lilesville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 7 counties, including Anson, Montgomery, Moore and Richmond. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Southern Veneer Specialty is a timber buyer in Moncure, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Ply or Veneer Logs. It covers 48 counties, including Alamance, Anson, Beaufort and Bertie. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Stewart's Forest Services, Inc. is a timber buyer in Germantown, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 99 counties, including Alamance, Alexander, Alleghany and Anson. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Stone Timber Products, Inc. is a timber buyer in Sims, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 41 counties, including Alamance, Anson, Caswell and Chatham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Summitt Logging, LLC is a timber buyer in St. Pauls, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 6 counties, including Bladen, Columbus, Cumberland and Hoke. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Timber Services, Inc. is a family-owned sawmill at 125 Walter Road in Carthage, North Carolina, with a mailing address in Whispering Pines. It saws longleaf pine into rough-sawn lumber and makes heart pine flooring, paneling and shiplap, beams and mantles, and pressure-treated lumber. Its products are sawlogs and chip-n-saw. Its listed species run from southern yellow pine and cypress to red oak, white oak, cherry, walnut, and sweetgum. The mill has operated since 1996. Owner William J. "Bill" Gingerich has worked in forestry and wood products since 1983 and holds degrees in forestry and wood science from Paul Smith's College and Colorado State University. He personally selects, saws, and inspects every order on the mill's Baker Band saw. The mill's own pages describe its logs as "Logs sourced from small, low-impact tracts." It serves Alamance, Anson, Cabarrus, Chatham, Cumberland, Durham, Guilford, Harnett, Hoke, Lee, Montgomery, Moore, Randolph, Richmond, Robeson, Rowan, Sampson, Scotland, Stanly, Union, and Wake counties. It suits a landowner in Moore County or another county it serves who has longleaf pine and wants to ask this mill directly how it sources logs from small tracts. From timberservicesinc.com, read 10 October 2026.

Opened in 1945 as Troy Lumber Sales Corporation by Frederick Leslie Taylor, Sr., incorporated under its present name in 1948, and now in the third generation of Taylor family leadership. The Leslie Street mill employs more than 170 people and turns out over 160 million board feet of finished lumber a year. In 2023 the company bought a hardwood mill and converted it to pine production, and a November 2024 feature in Construction in Focus credited part of its growth to staying open through the COVID-19 pandemic while larger corporate mills shut down. That profile also describes a servant-leadership philosophy, daily and monthly safety meetings, and a workers' compensation experience rating improved by cutting accidents. The mill hires foresters, electricians, PLC programmers and heavy equipment mechanics directly rather than contracting them.

Uwharrie Lumber Co. is a timber buyer and mill based in Troy, North Carolina. They buy stumpage, sawlogs, and pulpwood, and they run a hardwood sawmill too, so they can take wood from standing timber through to sawn lumber. They work with Red Oak, White Oak, Yellow-Poplar, Hickory, and Mixed Hardwoods. They serve a wide stretch of counties: Alamance, Anson, Cabarrus, Caswell, Chatham, Cleveland, Cumberland, Davidson, Davie, Durham, and Forsyth. There's no stated minimum acreage, and no clear word on how small a job they'll take on, so if you're sitting on a small lot it's worth a call to ask directly rather than guessing. This fits a landowner in or near that stretch of counties who has hardwood timber to sell, whether standing or cut, and wants someone who both buys logs and mills them. From uwharrielumber.com, read 10 October 2026.

The Armour mill on Federal Road is a softwood sawmill, one location of West Fraser Timber Co. Ltd., a publicly traded producer that states it runs more than 50 locations including 32 lumber mills. It sits on the NC Forest Service register as a buyer of standing timber and sawlogs reaching twelve counties, from Columbus and Bladen west to Anson, and it belongs to the Columbus County Chamber of Commerce & Tourism. In March 2025 crews contained a fire in the mill's debris storage yard; a company spokesperson said all employees were safe, there was no property damage, and the mill, logs and lumber were not impacted.

WestRock - Florence, SC is a timber buyer based in Florence, South Carolina, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Standing Timber and Pulpwood. It covers 21 counties, including Anson, Bladen, Brunswick and Chatham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Wood Forest Resources, LLC is a timber buyer in Wilson, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: Southern Yellow Pine, Ash, Red Oak, White Oak, Hickory, Sweetgum and Yellow Poplar. Products: Standing Timber, Sawlogs and Pulpwood. It covers 69 counties, including Alamance, Anson, Beaufort and Bertie. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.