Selling Timber in Nash County, NC

One of the oldest registrations in the state register sits behind this firm — number 517, eighteenth-oldest of the 178 listed — and there are two registered foresters here rather than one, which means the practice does not rest on a single person. Fifteen counties, compact: Wake and Franklin east through Nash and Edgecombe to Bertie, Martin and Northampton. Sixteen services in all, with forest taxation, recreation and Christmas tree management alongside the appraisal, cruise and sale administration a timber sale actually turns on.

Four services on the register, and three of them are the timber sale itself: appraisal, cruise, sale administration. That is about as narrow a list as the state register carries — no burning, no wildlife work, no real estate — from a firm whose registration is the 23rd oldest of the 178 on file. Eleven counties, tightly grouped through the upper coastal plain and the northern piedmont around Rocky Mount, Halifax and Warren. ACF membership means consulting is the full-time job here, not a sideline.

Registration number 273 is the sixth-oldest of the 178 registrations on the state register — one of the longest-tenured entries anywhere in this directory. The footprint is small and coherent: thirteen counties across the upper coastal plain, Wilson, Nash, Edgecombe, Pitt, Halifax and Northampton among them. Nine services, clustered on the sale itself — appraisal, cruise and sale administration — with forest taxation and environmental impact statements alongside. SAF member; no website listed.

Two registered foresters and a short, pointed list: management plans, reforestation, stand improvement, the three timber-sale services — and surveying. That last one is uncommon and useful, because a firm that can cruise your timber and also run your lines settles a boundary question on the same visit. Fourteen counties, closely grouped from Wake and Franklin east to Bertie and Wayne.

From Louisburg the coverage runs west to Durham and Orange, south through Wake and Johnston, and east into Edgecombe and Northampton — twenty-one counties straddling the line where the northern piedmont gives way to the coastal plain. The register lists the full sale set: appraisal, cruise, and administration of the sale itself. Logging engineering, herbicide application and stand improvement round it out, a list built around getting timber cut and the ground back into production rather than around consulting extras.

Appraisal, cruising and sale administration are all on this Wilson firm's register entry — the three pieces that let a forester value a stand, measure it, and carry the sale through to contract. Coverage is seventeen counties in the northern and eastern coastal plain, from Franklin and Nash out to Hyde and Washington on the sounds. Two less common additions sit alongside the usual work: forest taxation and environmental impact statements. Registration 1865 is one of the newer numbers on the state register.

Northeastern North Carolina, from the Albemarle counties of Camden, Currituck and Perquimans down through the Roanoke and Tar river country to Wake and Johnston — twenty-five counties in all. Twelve services, a working forester's list rather than a full-service consultancy: appraisal, cruise and sale administration, reforestation, timber stand improvement, prescribed burning and marketing. Both the Association of Consulting Foresters and the Society of American Foresters are on file, and the ACF admits full-time consultants only.

Based in Tarboro and working twenty-two counties across the northeastern coastal plain and up into the northern piedmont — Bertie, Hertford and Gates on one side, Orange and Alamance on the other. Fifteen services is a broad list, and it covers both halves of a landowner's problem: appraisal, cruising and sale administration for the harvest itself, then prescribed burning, herbicide, wildlife management and stewardship plans for what happens to the ground afterward. Forest taxation is on the entry as well.

Surveying, wetland delineation, environmental impact statements, prescribed burning, urban forestry, forest taxation — the register lists twenty services here, as many as any firm on it carries, and appraisal, cruising and sale administration are among them. The territory is thirty-six counties, reaching from the northern piedmont around Durham and Granville east across the coastal plain to Currituck, Dare and Hyde, with a southern arm into Cumberland, Hoke and Robeson.

Two registered foresters and eighteen services inside a fifteen-county footprint — an unusual pairing, the breadth of a large firm in the geography of a local one. The ground is the Roanoke valley and the northern coastal plain: Halifax, Northampton, Warren and Bertie across to Nash, Wilson and Edgecombe. Appraisal, cruise and sale administration are all there, and the list keeps going well past the sale into prescribed burning, wetland delineation, forest taxation, Christmas trees, wildlife and recreation. It also holds one of the ten oldest registrations in the state register, and the firm is an ACF member.

A short service list, and a focused one: management plans, reforestation, stand improvement, the three timber-sale services, forest real estate, taxation, marketing and wildlife. Ten in all, near the narrow end of the register — this reads as timber-sale work rather than full-spectrum land consulting. What matters most is present, though: the firm can appraise a stand, cruise it and run the sale. Fifteen counties across the eastern coastal plain, from Halifax and Nash down through Pitt and Lenoir to the Pamlico and Carteret coast.

Registration number five — the oldest registration in the N.C. Forest Service register, first of all 178. Fourteen counties, clustered along the Virginia line and the northeastern coastal plain: Vance, Warren, Granville and Person on the west side, Halifax, Northampton, Hertford and Bertie on the east. The full sale set is here — appraisal, cruise, sale administration — and so is surveying, which means a boundary question and a timber cruise can be handled in one engagement instead of two. An ACF member firm.

Forty-six counties, close to half the state, and nearly all of it east of the piedmont: the Roanoke and Tar drainages, the full northeastern coastal plain, south through Craven and Onslow, out to Dare, Hyde and Tyrrell, with a western reach into Guilford, Alamance and Durham. Very few firms on the register cover that much ground with a single registered forester. Fifteen services, from appraisal, cruise and sale administration through prescribed burning, herbicide work, recreation and urban forestry. No website is listed.

Timber Marketing and Management of the Carolinas, Inc. is the forestry side of a Raleigh practice whose site now carries the TMM Real Estate LLC name, and its forester, Edwin E. Orr, holds N.C. Registered Forester number 477 - the fifteenth-oldest of the 178 registrations on the state register. The service area is broad to match: thirty-nine North Carolina counties running from Caswell and Stokes on the Virginia line, through the Triangle and the sandhills, down to Brunswick and the coast. The company's own account says the business has roots in land sales going back to the early 1980s, when Timber Marketing & Management of the Carolinas Inc. was selling rural farms and timberland properties, and that sales today take in a wider range of property, including transitional, residential development, recreational land and timberland. Its timber sales page says the sale of timber is the most critical time for a landowner to get professional advice, and describes the firm helping an owner decide which trees to sell and when, making intensive inventories, setting sale conditions to protect the property, checking the sale against government regulations, advertising and marketing it, accepting bids or negotiating offers, overseeing preparation of the timber deed, closing, and inspecting the harvesting operation; logging inspections are carried out on every sale it handles. The inventory and appraisals page says cruises are run by plot sampling, strip sampling, point sample or 100 percent marking, from light-intensity sample cruises up to estimates in which every tree is measured and marked. Timberland management plans are built on inventory and growth data, carry timelines and income and expense projections, and draw on experience in natural pine, plantation pine and hardwood, implemented through the firm's own employees and independent contractors. Growth studies and yield projections, reforestation, annual property inspection for absentee owners, boundary line maintenance and mapping complete the list. As described on tmmoc.com, read 23 September 2026.

Effectively the eastern two-thirds of the state: sixty-eight counties covering every county on the coastal plain and most of the piedmont, which puts this among the widest-reaching listings on the register. Two registered foresters, the older registration numbered 914. The sale trio is present — appraisal, cruise, contract administration. Surveying is on the service list as well, alongside forest real estate and urban forestry, so a boundary or title question does not need a second firm. On its own site the business trades as Carolina Forestry & Realty, a privately owned professional corporation held by co-owners Keith Brouillard and Rodney Finkbiner and recognised by the N.C. Board of Registration for Foresters as a Professional Forestry Company, working in North Carolina and Virginia and claiming more than 30 years of it. Timber is sold for the landowner on a lump-sum sealed-bid basis, the site saying a sale can draw five to ten bids, after an appraisal done by cruising on larger even stands or by tree count on small or irregular ones. Beyond the sale it lists timberland investment analysis, comprehensive management plans with growth-and-yield and economic projections, pulpwood and residential or development thinnings, disease and pest management, property tax reduction, damage and trespass appraisals and boundary line maintenance. The forestry side sits next to a working rural land brokerage: both owners are licensed brokers and Realtors and the firm publishes its own listings, so a landowner deciding between selling timber and selling the tract can put both questions to the same office. As described on carolinaforestry.com, read 22 September 2026.

Seven registered foresters is the top of the range on the state register, and it comes attached to eighty-four counties — mountains to the Outer Banks, with very little of North Carolina out of reach. Scale like that means a landowner isn't waiting on one person's calendar, and it means the firm doesn't vanish when someone retires. Nineteen services: wetland delineation, environmental impact statements, forest taxation and urban forestry, alongside the appraisal, cruise and sale-administration combination a competitive timber sale actually runs on. ACF and SAF. The firm trades as GFR Forestry Consultants and dates itself to 1964, and it works from four North Carolina offices — Raleigh, Lillington, Tarboro and Lake Waccamaw — with its published service area running beyond the state line into South Carolina, Virginia, Maryland and the Eastern Shore. Its own account of a timber sale runs from stand assessment through a sale announcement and marketing plan to bid management, handled by foresters it says keep current on local buyers, pricing and competition; on the management side it names timber inventory and valuation, timber trespass analysis, forest management planning, GIS mapping, boundary line location and maintenance, pulpwood thinning, pest and disease control, fire protection measures and hunt and lease management. Two services sit outside the usual consulting list: timber basis determination and tax planning for estates and long-held family land, and wood flow and logistics work for landowners or businesses moving product to buyers. It also runs a rural real estate side, brokering timberland, hunting and agricultural tracts through licensed N.C. brokers. As described on gfrforestry.com, read 22 September 2026.

Every county in North Carolina is listed against this firm — all 100 — which puts it in the small group on the register that will work anywhere in the state. The service list is narrow by comparison: ten entries, built tight around the sale itself, with appraisal, cruising and sale and contract administration at the middle and forest taxation, utilization and marketing, urban forestry and stewardship plans around them. Both ACF and SAF memberships are recorded. One registered forester covers that ground, which is worth knowing when you're arranging a visit.

Coverage across twenty-seven counties of the coastal plain, from Halifax and Northampton down through the Neuse basin to Onslow and Pender, and east into Hyde, Dare and Tyrrell. The service list is short — management plans, reforestation, stand improvement, appraisal, cruising, sale administration, logging engineering, taxation and marketing — which is the working end of a timber sale rather than a full-service consultancy.

The office is across the state line in Valentines, Virginia, which suits the ground it covers: fourteen counties strung along North Carolina's northern tier, from Person and Granville east through Warren and Halifax to Gates and Hertford. Appraisal, cruise and sale administration are all listed — the full set a landowner needs to run a competitive sale — plus logging engineering, herbicide application and urban forestry. No website is on file with the register.

Rudd Forestry, PLLC works out of Raleigh, and the directory records coverage of forty-six counties reaching from the Rockingham and Forsyth line east through the Triangle out to Pitt, Onslow and Pender. The firm says its aim is to help landowners achieve their goals for their forestland, and that it works in North Carolina and Virginia. Its services page describes tailored management plans for forest health and long-term sustainability, timber appraisal covering volume, value and forest health, planning and management of timber sales and harvests, site-specific reforestation, boundary line marking, property security against trespassing, theft and poaching, GIS mapping, hunt lease management, wildlife habitat improvement, forest conservation, outdoor recreation planning, and help buying and selling North Carolina farms and timberland. Owner Thomas Rudd holds a forest management degree from North Carolina State University and states sixteen years as a consulting forester and fourteen as a licensed North Carolina real estate agent, together with arborist certification, a drone certification and standing as a certified tree farm inspector. As described on ruddforestry.com, read 22 September 2026.

Every service the state's A–U schedule covers is on this record — all twenty, more than 98 percent of firms on the register. So the timber-sale core of appraisal, cruise and sale administration sits alongside surveying, wetland delineation, prescribed burning, Christmas tree management and urban forestry. A landowner with a boundary question or a wet corner can get both answered on the same visit as the cruise. Coverage spans forty counties, from the north-central piedmont down through the sandhills and out to the southeastern coast. Memberships in the Society of American Foresters and the International Society of Arboriculture are recorded; no website is.

The register gives Interstate Forest Products forty-five counties — the whole coastal plain from the Virginia line to South Carolina, plus a run up into Franklin, Granville and Warren — and eight services, appraisal and cruising among them but not sale administration. The firm's own site fills that gap. It describes itself as “a forestry consulting company serving Virginia and North Carolina,” trades as Interstate Forest Products LLC, and was founded in 2011 by Chuck Little after sixteen years buying timber for firms including Georgia-Pacific and Coastal Lumber; it says IFP is listed as a consulting forester in both states, with thirty years in these local timber markets. Most of the site is given over to the timber sale, run as a sealed bid: the cruise and appraisal that set a minimum bid never disclosed before the sale, a sale notice sent to buyers with the cruise attached, a sale map showing acres, access and harvest boundaries, three to four weeks for bidders to cruise it, bids read aloud on the day, and a thirty-day close in which the buyer runs the title search, prepares the timber deed and pays in full, timber rights usually running two years. Thinnings are handled differently: sold per ton, treated as a silvicultural treatment rather than a harvest, and awarded on the operator's care — the firm writes it would rather take a few cents less and be left with a good stand. Management plans are the other main line: acreage, ownership, location and objectives; stands divided by age, timber type, soil type and condition; soil maps and photographs; per-stand recommendations and a schedule by year. The site notes an up-to-date plan is required for reforestation cost share, and recommends replanting clearcuts with improved loblolly pine seedlings in late fall or winter, with site prep spray or bedding where needed and longleaf, shortleaf or hardwood alternatives where cost share helps. Another page argues there is no timber price index to watch, and that local mill conditions and logging weather matter more. The site publishes N.C. Registered Forester #1429, N.C. ProLogger certification and N.C. Forestry Association membership. As described on interstateforestproducts.com, read 23 September 2026.

Eight services and nothing extra: management plans and mapping, reforestation, stand improvement, appraisal, cruising, sale administration, logging engineering, and utilization and marketing. That is a narrower list than roughly nine in ten firms on the register carry, and pointedly built around getting wood measured, valued and sold. Twenty-one counties, spread from Alamance and Orange in the piedmont east through Wake, Johnston and Nash and down into Sampson, Duplin and Pitt.

Most of the coastal plain is in range here — Northampton and Halifax in the north, down through the Neuse and Cape Fear country to Brunswick — thirty-four counties in all, well above the register's median of twenty, with Caswell, Person, Lee and Moore attached on the piedmont side. Appraisal, cruise and sale administration are all listed, along with prescribed burning, herbicide application, forest real estate and forest taxation. Registration 578 is among the older on the register, and the firm holds ACF membership, which is limited to full-time consultants.

The office is in Charlottesville, Virginia, a good way over the state line, but the North Carolina coverage is nothing marginal: 64 counties, wider than 93 percent of firms on the register. That takes in the whole piedmont and coastal plain east of the mountains, from Currituck and Brunswick inland to Surry and Rockingham. Two registered foresters, fifteen services — wetland delineation and environmental impact work sitting alongside the appraisal, cruise and sale-administration set — and ACF membership. The company website is a corporate one and says nothing about any particular North Carolina office or county: it states only that F&W's foresters are located throughout the United States, South America and Europe, and points visitors to a find-your-local-forester map. What it does set out is the firm behind the local contact. F&W says it was founded in 1962 by Eley Frazer and Frank Wetherbee, is headquartered in Albany, Georgia, and manages millions of acres of forestland worldwide; its published timeline runs from regional inventories and forestland appraisals in the 1970s, through growth from 25 employees in two states to 100 in eight states during the 1990s, to expansion into Uruguay and Brazil and the Tree Farm Group certification in the 2000s and the acquisition of Fountains US and UK in 2016. Eight service lines are published — timber sales, property management, field support services for TIMOs and REITs, forest inventory and mapping, forestland accounting, technical and analytical work, real estate, and natural capital. On timber sales specifically the firm describes pre-harvest valuation reporting on species, age and condition, sale layout and marketing to match timber to the best market, then on-site harvest supervision: harvest inspections and reporting, streamside management zone delineation, BMP compliance audits, timber marking, boundary re-marking and road maintenance oversight, with Phase I Environmental Site Assessment available during property transactions. As described on fwforestry.com, read 22 September 2026.

R.B. Klass Forestry Services, based in Cary, North Carolina, is listed as a forestry consultant and also as a timberland broker. The work on offer covers forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, logging engineering, forest real estate, forest taxation, and utilization and marketing. Its own pages describe building land management plans, "usually covering 10 years or more," based on an analysis of timber stands and what the landowner wants. It works in pine and hardwood, and also pine straw. Thinning work ranges from pre-commercial thinning in young pine stands to commercial pulpwood thinning, crop tree release, and commercial improvement cuts in hardwood and mixed stands, with trees marked by hand depending on the age, size, and stocking of each stand. Reforestation work includes site preparation, seedling selection, and cost share paperwork, and it says it searches out "the best genetically improved seedlings on a tract-by-tract objective basis." It also offers Tree Farm certification, prescribed burning, wildlife habitat work, and hunting lease negotiation. It serves Bertie, Camden, Chowan, Currituck, Edgecombe, Franklin, Gates, Greene, Halifax, Hertford, Martin, Nash, Northampton, Pasquotank, Perquimans, Pitt, Warren, Wayne, and Wilson counties. It holds an N.C. Registered Forester credential (provisional), #472, and has been "helping landowners reach their goals since 1983." The smallest job shown on its pages is the Linden Tract on the Lower Little River, a roughly 306 acre property, which gives a sense of the scale it has handled. This suits a landowner with a larger timber tract who wants a full management plan built around it, not just a quick one-off sale. From ncforester.com, read 10 October 2026.

A piedmont practice with a long reach east — thirty-one counties from Surry and Stokes on the Virginia line, across the Triad and the Triangle, then out through Johnston and Wayne to Wilson, with Robeson and Cumberland picked up to the south. Logging engineering sits on the service list next to the appraisal, cruise and sale administration a sale runs on, which is the difference between marking a stand and working out how to get equipment onto it. Fourteen services in total. The register lists no association membership and no website.

Seventeen services is a long list by this register's standards, and the mix is unusual: urban forestry sits next to wetland delineation, prescribed burning and logging engineering, backed by membership in the International Society of Arboriculture rather than the usual forestry bodies. Twenty-two counties across the central and northeastern coastal plain, from Wayne and Johnston out to Hyde and Tyrrell. Appraisal, cruising and sale administration are all listed, so a sale can be valued, measured and run to contract. No website is on file.

Twenty-one counties across the northeastern and central coastal plain, from Beaufort and Pitt out through the tidewater. The register credits appraisal, cruising and sale administration together — the full set for running a competitive sale instead of taking the first offer. Past that the list stays tight: reforestation, stand improvement, burning, herbicide, wildlife. One forester, no website listed.

Tighter than all but a handful of listings on the register — seven counties, all in the northeastern corner of the state: Northampton, Hertford, Gates, Bertie, Halifax, Warren and Nash. The office is across the line in Branchville, Virginia, a short drive from most of them. Five services only, the narrowest list in the register, but they are the sale services: management planning and mapping, appraisal, cruise, sale administration and stewardship plans. Certified Forester and Society of American Foresters credentials are on file.

Eighteen counties across the southeastern and south-central coastal plain — Sampson, Duplin, Cumberland, Robeson, Bladen, Columbus and Brunswick, reaching north to Johnston, Wake, Wilson and Nash. The essentials for a timber sale are all on the entry: appraisal, cruise, and administration of the sale through to contract. Thirteen services in total, with prescribed burning, herbicide application, wildlife management, recreation and forest taxation rounding it out. No website appears on the register.

Membership in the Association of Consulting Foresters is the thing to notice here. ACF takes full-time consultants only, so this is the firm's actual business rather than something done around other work. Thirty-three counties, running from Guilford and Rockingham in the northern piedmont across the Triangle and down through the sandhills into Scotland, Robeson and Pender. Sixteen services, including prescribed burning, forest taxation and urban forestry, and the appraisal, cruise and sale administration set a competitive sale depends on.

Rock Springs Forestry, Inc. is a family owned forestry consulting business based in Capron, North Carolina. It has operated since 2000. The work it takes on covers the full run of forest management: forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimate, timber sale and contract administration, logging engineering, insect, disease and fire protection, prescribed burning, utilization and marketing, herbicide application, wildlife management, and stewardship plans, along with clearcut and thinning or select cut timber sales. Its own description of how a job runs is simple: it gives landowners "advice and recommendations to best meet our clients' objectives," then carries out the services needed to get there. It notes three N.C. Registered Foresters on staff, and says it has planted over 100,000 acres and more than 50,000,000 seedlings for landowners, local, state and federal government, and corporations since 2000. It serves private landowners across Southeastern Virginia and Northeastern North Carolina, including the North Carolina counties of Bertie, Camden, Chowan, Currituck, Dare, Edgecombe, Franklin, Gates, Greene, Halifax, Hertford, Hyde, Martin, Nash, Northampton, Pasquotank, Perquimans, Tyrrell, Warren, Washington, Wayne, and Wilson. It describes itself as a family-owned "one-stop shop" handling everything from planting to timber sales. This fits a landowner who wants one firm to plan the work, from planting through a future timber sale, rather than hiring separate people for each step. From rockspringsforestry.com, read 10 October 2026.

Fifty-nine counties from a one-forester office in Beulaville — effectively the whole coastal plain, from the Currituck and Dare marshes south to Brunswick, plus a long reach west through the Triad into Surry and Yadkin. Eighteen services puts this firm near the top of the register for breadth, and two of them are worth noticing: wetland delineation and environmental impact statements, which matter if the tract has bottomland or a permitting question attached to it. Valuation, cruising and sale administration are all covered. No website is listed.

Seven services, and they are the ones that sell timber: management plans and mapping, stand improvement, appraisal, cruise, sale and contract administration, utilization and marketing, wildlife. That's a working forester's list rather than a full-service consultancy. The territory is wide for it — 30 counties taking in most of the coastal plain, from the Albemarle and Dare south through Craven and Onslow, with a reach inland to Franklin and Warren. Edenton office; no website listed on the register.

Registration number 208 is the fifth-oldest on the state register, a tenure very few listings can match. Thirty-six counties spread across the central piedmont, the Sandhills and the inner coastal plain, from Rockingham and Caswell on the Virginia line down to Scotland and Robeson. Eleven services, a focused list: appraisal, cruise and sale administration, reforestation, timber stand improvement, herbicide application, forest real estate and stewardship plans.

Eighteen services — more than nine out of ten firms on the register carry — running from environmental impact statements and wetland delineation to herbicide work, urban forestry and recreation management. That breadth counts when a timber sale is tangled up with a wetland, an access road or a bigger estate question. The territory is the northeastern coastal plain and the Albemarle, twenty-two counties from Halifax and Warren out to Dare and Hyde. Note the office: Carrsville, Virginia, just across the line. Appraisal, cruise and sale administration are all listed.

Seven registered foresters — as many as any firm on the state register — and sixty counties covered, which together make this one of the largest consulting operations working in North Carolina. The reach runs from the foothills in Burke and McDowell across the piedmont and the sandhills to the coast at Brunswick, Onslow and Carteret. The full sale package is here: appraisal, cruise, and running the sale through to contract. Nineteen services in all, including prescribed burning, wetland delineation, environmental impact statements and forest taxation — which matter when a timber sale is one piece of a larger land or estate question. The company's own website is a national corporate one rather than a local office page, and it describes a firm of that scale: a corporate office in Charlotte, offices across the Northeast, Southeast, Lake States, Pacific Northwest and Gulf regions, and almost sixty years spent helping landowners manage, sell, buy, improve and enjoy millions of acres — AFM dates itself to 1966, when Bartow S. Shaw, Jr. formed the predecessor firm Bartow Shaw and Associates. It states a size threshold for the land management work in its own words: property of fifteen acres or more. The published service lines run well past timber alone — timber sales and timber management, reforestation and silviculture, forest inventory to establish volumes and values, wildlife services and habitat restoration, environmental services, forest carbon, land surveying, wood flow for navigating fibre supply agreements, farmland management through AFM Ag Services, and forestry and property accounting handled by a dedicated team of about twenty including CPAs on staff, covering property tax administration, audit support and hunt lease administration. Forest certification is offered too: the firm says management operations are conducted under FSC, SFI and ATFS guidelines. As described on americanforestmanagement.com, read 22 September 2026.

Two registered foresters rather than one, so the firm does not hang on a single person's calendar, covering twenty counties across the Albemarle and the northeastern coastal plain down to the Neuse. Fourteen services, prescribed burning and herbicide application included, and membership in the Association of Consulting Foresters. The firm dates its founding to 1974 and works from Ahoskie across eastern North Carolina, and it states plainly that it is independent of logging companies and sawmills while keeping working relationships with them — the distinction that matters when a landowner is deciding who represents them in a sale. Its timber sales follow a published seven-step process, from reading the stand and the market to choosing the sale type (pay-as-cut, lump-sum, trade, select cut, thinning or clearcut), administering it, monitoring the harvest against N.C. Best Management Practices and replanting afterwards, with reforestation stock named as loblolly, shortleaf and longleaf pine plus hardwood and wildlife species. Plans come in three published kinds — harvest and thinning, burn, and wildlife — with worked examples of each posted on the site, and the firm also does drone aerial photography and GIS mapping in-house and helps landowners apply for FSP, FMI, CRP, EQIP and other NRCS programmes. On the earlier caveat about valuation: the site does advertise appraisals, though framed as real estate work, saying it has brokers and appraisers who handle farmland and timberland of any size, so it is worth asking specifically whether a standing-timber appraisal is included. The firm publishes its own running tallies of 265,000 acres under management and 633 local clients served. As described on efmnc.com, read 22 September 2026.

The office is across the state line in Suffolk, Virginia, and the work listed here is not a timber sale. The register credits this firm with cruising and management mapping, but not with appraisal or sale administration — two of the three pieces a landowner needs to run a competitive sale. What it does list is environmental impact statements, wetland delineation, wildlife management and stewardship plans across eighteen counties in northeastern North Carolina, from the Albemarle counties inland to Nash, Franklin and Wilson. A six-service entry, and a narrow one on purpose.

All 100 counties, which only a handful of firms on the state register can claim — wherever the tract sits in North Carolina, this one covers it. Two registered foresters, and the older of the two registrations is number 482, sixteenth-oldest of the 178 on the register. Appraisal, cruise and sale administration are all here, so a landowner can value the stand, measure it and run the sale through to contract in one place. Seventeen services in all, out as far as Christmas tree management, urban forestry and forest taxation. The firm holds Association of Consulting Foresters membership, which is limited to full-time consultants. The firm calls itself family owned and says it has run a consulting forestry business for over 40 years; William H. Lock has retired from full-time forestry work and his son Jonathan C. Barnes, who passed the state forestry exam in 2002, now runs the company as president. Alongside state registration in both North Carolina and Virginia it claims Certified Forester and Certified Arborist credentials, Tree Farm Inspector status and Technical Service Provider approval for NRCS cost-share programs, and it offers work turn-key — timber inventory, marketing, harvest inspection and reforestation through one office — plus timber tax basis estimates, timber trespass reports, growth models for income projections and landowner seminars and field tours. Real estate is the one thing it has pulled back from: the site says that side is now limited to advice and referrals rather than listing and selling land. Its public timber sale notices, bids taken sealed at the office, run from 2010 through 2021 and cover tracts from a few acres up to about 280, clustered in Rockingham, Guilford, Alamance and Caswell counties and over the line into Henry and Pittsylvania counties, Virginia. A first consultation is offered free. As described on whlock.com, read 22 September 2026.

Fifty-eight counties is a big footprint — wider than nine out of ten firms on the register — and it stretches from the mountain counties around Watauga and Avery clear across the piedmont into the inner coastal plain at Wayne, Greene and Edgecombe. Two registered foresters, so the work does not stall if one is booked. Appraisal, cruising and sale administration are all listed, and unusually the firm pairs woodland work with urban forestry and an arboriculture credential, which matters if the tract sits on the edge of a growing town.

All one hundred counties — one of the few listings on the register that covers the entire state. The registration here is number 8, the second-oldest of the 178 registrations on the register, which is about as long a tenure as North Carolina forestry has to offer. Beyond the sale work of appraisal, cruise and contract administration, this firm surveys, so a boundary question and a timber cruise can be settled on the same visit. Christmas tree management, wetland delineation and environmental impact statements are also listed.

Milliken Advisors Inc. is a forestry consulting and timberland brokerage business in Columbia, North Carolina. It works with landowners on the kind of jobs that come with owning timberland, from planning a sale to planting trees back after a harvest. The work on offer covers forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, insect, disease and fire protection, prescribed burning, forest real estate, recreation management, forest taxation, utilization and marketing, herbicide application, and stewardship plans. The forester holds N.C. Registered Forester credential #1394. Milliken Advisors serves landowners across a long list of North Carolina counties, among them Wake, Mecklenburg, Guilford, Buncombe, and Dare. The business has been working with landowners since 1949. Its own description of how a job runs is plain: "Once we know what you want, we take a good look at your land: its current state, what's happening in the market, and what the future could hold. Then we build a strategy that actually fits your needs." On follow-through, it says "You don't have to worry about juggling contractors or chasing down deadlines." This fits a landowner who wants one firm to handle a timber sale or a management plan from start to finish, rather than piecing the work together themselves. From millikenadvisors.com, read 10 October 2026.

Work concentrated in eastern North Carolina — the inner coastal plain around Greenville, Goldsboro and Kinston, out to Carteret and Pamlico on the sound — sixteen counties in all, run from an office over the line in Dorchester, South Carolina. The register credits the firm with appraisal, cruising and sale administration, the set a competitive timber sale needs, along with reforestation, herbicide application and stewardship planning. It belongs to the Society of American Foresters.

Statewide coverage — all 100 North Carolina counties — from an office in Gainesville, Georgia. Fifteen services are recorded, including the three that make a timber sale work: appraisal, cruising, and sale and contract administration. Prescribed burning, herbicide application, urban forestry and stewardship plans fill out the rest. The register carries this entry under the name US Forest Service, with one N.C. Registered Forester and no website given.

The N.C. Forest Service register carries Dougherty & Dougherty across sixty-three North Carolina counties, foothills through piedmont to coastal plain — but the firm is run from Georgia. The register address is a PO box in Athens, Georgia, and the North Carolina connection is Derek Dougherty's registration, number 1029, rather than a North Carolina office. Trading as Progressive Forestry, the firm's site states that it “manages forest land for private forest landowners in the Southeastern US” with staff it describes as “college-educated, field-trained, and licensed forestry professionals,” and says its experience spans forest management, real estate investment, research and tree breeding. Its timberland management page sets the services out in detail: property and annual inspections, timber inventory reported in tons, cords or thousand board feet by species and product class, timber appraisal, boundary line marking, prescribed understory burning, plantation establishment, seed source selection, mid-rotation work, GIS mapping, growth and yield modelling, harvest scheduling and forest investment analysis. It also answers a question the register leaves open. The register credits the firm with appraisal and cruising but not with sale administration; the site says the firm prepares and oversees the marketing and harvest itself, by negotiation or sealed bid, with lump-sum or per-unit payment and clear-cut, select-cut or thinning harvests, including logging inspections and its own timber security and tracking system. The firm states it is a certified Forest Stewardship Program plan writer in North Carolina. Hardwood is treated as a speciality: the site argues the South's hardwood resource sits “well below its potential” after a history of high-grading, and describes a system of site and stand evaluation aimed at regular production of grade hardwood. Species named across the site include loblolly, longleaf and slash pine, green ash, yellow poplar and eucalyptus. A consultation line covers audits, seedling advice and expert witness work on timber trespass overcuts and failed plantations. No founding year is published. As described on progressiveforestry.com, read 23 September 2026.

Worth reading the service list closely here. The register credits this entry with timber cruising and sale administration but not timber appraisal — so the valuation step most landowners want before going to market isn't among the listed services. What is listed is broad: 48 counties across the northeastern piedmont and most of the coastal plain, plus reforestation, forest real estate, wildlife management and stewardship plans. The office address is Atlanta, Georgia. No website is on file.

Hunt Forest Resources, LLC is a timber buyer based in Moncure, North Carolina, with forestry consulting, firewood, and wood recycling run alongside it. They buy stumpage, sawlogs, pulpwood, and chip-n-saw timber in pine and hardwood, and they also handle forest management plans and mapping, timber cruise and volume estimates, timber appraisal, timber sale and contract administration, reforestation, timber stand improvement, prescribed burning, herbicide application, insect and fire protection, and wildlife and recreation management. Their registered forester holds N.C. Registered Forester #1438, and the company carries ProLogger and American Tree Farm System (ATFS) standing. They work across a long list of North Carolina counties, from Alamance, Durham, and Wake, through Chatham and Moore, down to Brunswick and New Hanover, and out east to Dare, Hyde, and Beaufort, along with many others. On their own pages they describe offering "a diverse range of services that span the entire lifecycle of forest products, from land and timber management to sustainable harvesting, real estate services, wood products manufacturing and beyond," and say they manage "7,000 acres of timberland annually" across four facilities in the state. This suits a landowner who wants one outfit that can buy the timber, write the management plan, and keep an eye on the ground afterward, rather than stitching together a buyer, a consultant, and a logger separately. From huntforestry.com, read 10 October 2026.

Gator Wood INC is a forestry consulting and timber buying business working with private landowners across North Carolina and Virginia, with an office in Wilson, NC. It was started in 1997. The work covers mixed hardwoods and runs from timber sales and timber evaluation to forest management plans, timber harvest plans, pulpwood thinning, wildlife management, reforestation, GIS mapping, forestry investment analysis, and land use tax guidance. In North Carolina it serves Northampton, Franklin, Nash, Wilson, Warren, Halifax, Edgecombe, Martin, Vance, Hertford, and Bertie counties, along with a wider list of counties across both states. Its foresters are described as "registered Foresters" and graduates of Virginia Tech or North Carolina State, and its logging crews are "certified logging contractors," with the company stating it is fully insured. The clients they describe range "from the small woodlot owner with 10 acres to forest land owners of large acreages," so 10 acres is the floor they name. This suits a landowner with a modest hardwood tract who wants one company to handle everything from the timber sale itself through replanting and ongoing management afterward. From gatorwoodinc.com, read 10 October 2026.

Coley Logging is a logging contractor in Nashville, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

East Coast Timberland Inc. is a timber buyer in Nashville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Chips. It covers 40 counties, including Beaufort, Bertie, Carteret and Chatham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Evergreen Timber Harvesting is a timber buyer in Castalia, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Small Woodlots. It covers 5 counties, including Franklin, Nash, Vance and Wake. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

T & K Logging, Inc. is a timber buyer in Castalia, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Small Woodlots. It covers 6 counties, including Franklin, Granville, Nash and Vance. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Tar River Timber Co., Inc. is in Red Oak, North Carolina. Its address is 114 Southgate Drive in Oxford, where it trades as Tar River Timber Works. The timber division was acquired in the summer of 2022 from Southern Woodcraft and Design. The business makes timber accents, frames, pergolas, pavilions, arbors and trellises for architects, designers, builders and owners. The work is in western red cedar, plantation teak and Douglas fir. It sources custom cut timbers from sustainably managed forests, air dries them, and cuts them with traditional tools plus CAD and CNC technology. Its timber packages go to the job site with every piece labeled and "ready to install," along with instructions. Counties it serves are Edgecombe, Franklin, Halifax, Johnston, Nash, Northampton, Vance, Wake, Warren and Wilson. It does not offer timber sales, stumpage or logging. It suits a landowner who wants timber accents or an outdoor structure built for a property, not one who needs a buyer for standing trees. From tarriver.com, read 10 October 2026.

American Woodyards, LLC is a family owned firewood yard in Raleigh, North Carolina, on Hillsborough Street. It is listed as a firewood and woodyards business, and also under timber buyers and wood recycling. The yard sells kiln dried and green firewood by the pound, year round. The firewood comes from local hardwoods including ash, cherry, hickory, maple, oak, and pecan, with red oak, white oak and hickory named as its main varieties. It also offers custom cut lumber and mulch. The lot is self-load, so customers load their own wood at the yard rather than having it delivered. It serves the Triangle area, naming Raleigh, Cary, Apex, Durham, Chapel Hill, Pittsboro, Wake Forest, Rolesville, Youngsville, Zebulon, Wendell, Holly Springs, Fuquay-Varina, Morrisville, Knightdale, Garner, and Clayton. The business describes itself as "providing the public with quality products since 1994," family owned and family operated, and says much of its wood comes from local job sites or customers' own backyards. This fits a landowner near Raleigh who has logs, scrap wood, or a few backyard trees to bring in or pick firewood up from, rather than someone looking to sell standing timber off a larger tract. From americanwoodyards.com, read 10 October 2026.

Fifty people work at this Warren County hardwood sawmill, which has run under the same family since 1952 — president Gary Harris's father founded it with partners, Harris has been there 50 years, and his daughter is the third generation on site. Fifteen contract truckers bring in about 6 million feet of hardwood a year from forests within roughly 100 miles, and the mill turns it into sweet potato storage boxes, logging mats and racking sticks alongside pallets, framestock, flooring and green, rough, surfaced or air-dried lumber. Finished product ships into North Carolina, Virginia and South Carolina. It is facility-grade certified by the National Hardwood Lumber Association and has held an A+ BBB rating since accreditation in 2014.

Cape Fear Forest Products, Inc. is a timber buyer in Erwin, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Veneer Logs, Pulpwood, Poles and Chip-N-Saw Logs. It covers 22 counties, including Alamance, Chatham, Cumberland and Duplin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Carolina Pine & Hardwood Inc is a logging contractor in Windsor, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Chase Logging is a timber buyer in Fremont, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 6 counties, including Edgecombe, Greene, Johnston and Nash. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Coburn Forest Products LLC is a timber buyer in Winton, North Carolina. It buys standing timber from landowners, and it also does logging work. It buys both hardwoods and softwoods. Its buying area runs from central and southern Virginia to northeastern and central North Carolina, roughly 100 miles out from the business. The counties it names are Bertie, Chowan, Edgecombe, Franklin, Gates, Halifax, Hertford, Martin, Nash, Northampton, Pitt, Warren, Washington and Wilson. Tracts are bought either lump sum or pay-as-cut. The services are conventional logging, thinnings and low-ground logging. Its logging page also covers clear cuts, which remove all the trees from an area and are most common in pine and hardwood forests. The business describes its cutting as "Designed to cut to the landowner's specifications and needs", whether the job is commercial or private. The company was started in 2007. Ronald Coburn has 41 years of timber buying behind it. All of its loggers are NCFA Pro-Logger trained and certified, or SHARP logger certified. Ronald is joined by his son Mark, daughter-in-law Elise, Mike Pollard and Amy Mejia. It suits a landowner in one of the named counties who wants to sell standing timber by lump sum or pay-as-cut, or who wants a thinning done with the cut set to their own plans. From coburnforestproducts.com, read 26 October 2026.

Conetoe Land & Timber, LLC is a timber buyer in Goldsboro, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 18 counties, including Beaufort, Bertie, Chowan and Durham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Federal motor carrier records list D and J Logging Inc with three power units and two drivers, registered as a private property carrier hauling construction cargo rather than a for-hire freight operation. Beyond that filing there is very little on the public record — no website, no reviews, no ratings, no certifications. The NC Forest Service register is the only account of what it buys: standing timber, sawlogs and pulpwood, with a timber cruise offered. Its Raleigh yard shares a street address with American Woodyards, LLC, though no source found confirms a relationship between the two businesses.

Incorporated in April 1974, Elkins Sawmill is run by three officers who all share the family name. The Better Business Bureau rates it A+ — the company is not BBB accredited — and describes the product line as lumber, crossties, mulch and firewood, broader than the stumpage, sawlog and pulpwood purchasing the state register records. Besides the King Road mill in Moncure, the company also operates from an address in Goldston. It appears in the North Carolina Forestry Association's Buyer's Guide under timber buyers, though that guide carries non-member businesses alongside members, so membership should not be assumed.

Enviva Pellets Southampton, LLC is a timber buyer based in Franklin, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Chips, Pulpwood and Standing Timber. It covers 47 counties, including Beaufort, Bertie, Bladen and Camden. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Enviva-Wood is a timber buyer in Rocky Mount, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber. It covers 9 counties, including Edgecombe, Franklin, Greene and Halifax. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Evans Logging, Inc. is a timber buyer in Jamesville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 12 counties, including Beaufort, Bertie, Edgecombe and Franklin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Flowers Timber Co., Inc. is a mill in Seven Springs, North Carolina. It has a Google Maps business listing in that category. It is also listed as a logging contractor. A listing here is not an endorsement.

Fordham Timber Co is a timber buyer in Selma, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Chip-N-Saw Logs, Ply or Veneer Logs, Pulpwood and Poles. It covers 13 counties, including Duplin, Edgecombe, Franklin and Greene. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Four Seasons Timber & Land Co is a timber buyer in Fremont, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber. It covers 18 counties, including Beaufort, Bertie, Craven and Duplin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Franklin Lumber, LLC is a timber buyer based in Franklin, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Sawlogs. It covers 20 counties, including Bertie, Camden, Chowan and Currituck. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

A third-generation family firm working out of the Inez community outside Warrenton, with more than thirty years in the business by its own account. What separates it from a straight stumpage buyer is what it offers after the cut: reforestation assistance and land management consultation, so a harvest can be handled as one stage of a longer plan for the tract rather than a one-off sale. Buying and harvesting are both done in house. The company names Glenn Coleman III as president and Will Coleman as vice president, with Taylor Gartrell buying timber, and says the team trained at NC State University and Wake Technical Community College. Office hours run 8:30 to 4.

International Paper Co is a timber buyer based in Courtland, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine, Yellow Poplar, Sweetgum, Soft Maple, Black/Tupelo Gum, Red Oak, White Oak and Hickory. Products: Standing Timber, Sawlogs, Pulpwood and Boiler Fuel. It covers 20 counties, including Bertie, Camden, Chowan and Currituck. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Incorporated in North Carolina on 30 December 1999 and still listed as current-active in the state registry, this is a timber buyer that leaves almost no public trace: no website, no Facebook page, no reviews, and no trade association or certification records were found. The NC Forest Service register is the only description of what it does — buying standing timber, with a timber cruise offered — and it covers a notably narrow area, just two counties. One thing worth verifying first: the only corporate filing found under this name gives a Siler City address in Chatham County, not the Raleigh mailing address shown here.

Unlike most stumpage buyers in Halifax County, Kerr runs its own log trucks. Federal motor carrier records under USDOT 337205 list eight power units and three drivers as of the August 2025 MCS-150 filing, and the cargo classification covers "Logs, Poles, Beams, Lumber" alongside "Machinery, Large Objects" — meaning the company hauls its own harvesting equipment onto a tract as well as the wood off it. An industrial directory describes the business as wholesaling rough, dressed and finished lumber and offering logging and forest management services, so it does more than buy stumpage. The NC Forest Service register records it as buying all hardwood and all softwood species, broader than the mixed-hardwood entry the listing was built from. No website, Facebook page or published reviews were found.

Jerry G Williams & Sons Lumber Inc. is a sawmill in Smithfield, North Carolina. They buy standing hardwood and pine timber, and they also run a separate logging crew through a partnering company, JMW Logging and Timber Company, along with contract loggers who cut and supply logs to the mill. They work in Poplar, Ash, Cypress, Red and White Oak, and Southern yellow pine. The mill sits in the Piedmont region of North Carolina and draws its timber base from both the Appalachian and Southern forests. Jerry G Williams & Sons Lumber Inc. lists Johnston County as an area it serves. They say "We buy standing hardwood and pine timber," and their lumber services go on to cover kiln drying, width sorting, NHLA grading, export prep, container loading, and mixed truck loads. They follow State Forestry Best Management Practices, and they support the Pro-Logger education program and the landowner education incentives under the Sustainable Forestry Initiative. The company started back in 1986, when Jerry Williams bought a former Union Camp sawmill in Smithfield. It has stayed a family operation since, now run by his grandson Kevin Williams as Vice President overseeing mill operations. This one suits a landowner in or near Johnston County with standing hardwood or pine timber to sell, who also wants a mill that can take the logs all the way through to kiln-dried lumber. From jerrygwilliamslumber.com, read 10 October 2026.

Josey Lumber Co. Inc. is a timber buyer in Scotland Neck, North Carolina. It has a Google Maps business listing in that category. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Katesville Pallet Mill is a mill in Franklinton, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Lassiter Forest Products, Inc. is a timber buyer in Princeton, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 21 counties, including Beaufort, Bertie, Bladen and Carteret. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Louisburg Hardwood, Inc. works out of Warrenton, North Carolina. They buy timber, run a sawmill, and also produce firewood and pallets, so if you have trees to sell they can buy standing timber (stumpage) and handle sawlogs, pulpwood, and chip-n-saw too. They work in Red Oak, White Oak, Hickory, Ash, Yellow-Poplar, and Southern Yellow Pine. Their people hold NC ProLogger certification and USDA Heat-Treat Certification, which matters if you care about mill and transport standards for whatever comes off your land. They cover Franklin, Vance, Warren, Granville, Halifax, Wake, Nash, Johnston, Person, Northampton, and Edgecombe counties, so a tract anywhere in that stretch of North Carolina is in their range. The company has "been in the timber, sawmill, firewood, and environmental silt fence stake business for many years," working alongside related sawmill and pallet operations under the same ownership. Their firewood work is described as being "cut uniformly, cleaned thoroughly and processed before it is available for sale," which gives a sense of how they handle wood once it's down. This fits a landowner in that part of North Carolina who wants one outfit that can buy the standing timber, mill it, and also take the leftover wood into firewood or pallet stock, rather than dealing with separate buyers for each step. From smokehouselumber.com, read 10 October 2026.

Registered with the NC Secretary of State in July 2019, Medlin Forest Products is one of the newest timber-buying operations working the Roanoke Rapids area. The state record shows a single managing member who is also the registered agent, at the same Stoneybrook Drive address as the business — an owner-operated buyer run from a home office rather than a mill yard. On the NC Forest Service register it lists fuel chips among its products alongside sawlogs and pulpwood, so it has an outlet for low-grade and biomass material as well as merchantable logs, and it records species as all hardwoods and all softwoods rather than the mixed hardwoods shown on this listing. No website, Facebook page or published reviews were found.

Meherrin River Forest Products, Inc.-Weldon Sawmill is a sawmill business based in Weldon, North Carolina, serving Halifax County. It also buys standing timber and offers timber appraisal, working with its logging partner, Union Level Land & Timber, LLC, to harvest in Virginia and North Carolina. If you have timber to sell, their process starts with a free timber stand appraisal. You give them some information about your land and their forestry team contacts you. From there they can buy standing timber, and Union Level Land & Timber handles the harvesting. The company runs sawmills and kilns in Virginia and North Carolina, and says its goal is "High quality Appalachian Lumber" cut from wood sourced through that same partnership. They've operated since 2011, starting with one mill and growing to several locations. They belong to the Carolina Loggers Association, the Virginia Forest Products Association, the National Hardwood Lumber Association, the Virginia Loggers Association, the Virginia Forestry Association, and the North Carolina Forestry Association. Their president has said, "Good Stewardship is not an option, it's our way," pointing to how they talk about sustainability and forest regeneration alongside the sale itself. This fits a landowner in the Virginia or North Carolina timber country who wants a company with its own mills and a standing partnership for logging, rather than a one-person outfit, and who's comfortable starting the conversation with a timber appraisal request. From meherrinriver.com, read 10 October 2026.

Mill Creek Timber Co., Inc. is a timber buyer in Cedar Point, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine, Cypress, Ash, Beech, Black/Tupelo Gum, Cottonwood, Hickory and Soft Maple. Products: Standing Timber. It covers 24 counties, including Beaufort, Bertie, Carteret and Chowan. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Neuse River Forest Products is a timber buyer in Princeton, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber. It covers 10 counties, including Duplin, Edgecombe, Franklin and Greene. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Pickin Pines Inc is a logging contractor in Scotland Neck, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Poplar Ridge Logging is a timber buyer in Norlina, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 7 counties, including Franklin, Granville, Halifax and Nash. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

In business since 1980, this Warren County operation is both a harvesting crew and a timber buyer: the NC Forest Service register lists it as purchasing standing timber, sawlogs and pulpwood and as offering a timber cruise. It holds interstate for-hire motor carrier authority under USDOT #3518186, running two power units and two drivers with cargo recorded as logs, poles, beams and lumber, so the same company that cuts the timber also hauls it. No website, Facebook page, reviews or ratings were found. The Better Business Bureau maintains a profile but lists the company as not rated for lack of information, and it is not BBB accredited.

River Ridge Forest Products Inc is a timber buyer in Oxford, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber. It covers 9 counties, including Franklin, Granville, Halifax and Hertford. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

RLM Logging, Inc. is a timber buyer in Goldsboro, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 13 counties, including Craven, Cumberland, Duplin and Edgecombe. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Roseburg is the largest commercial timberland owner in the Roanoke Valley region, holding roughly 158,000 acres acquired in 2017 plus about 30,000 more added in 2021 — close to 200,000 acres across North Carolina and Virginia. The Roanoke Rapids address is a timber management office rather than a mill, and the Roanoke Rapids Daily Herald reported in March 2024 that the building at 524 NC Highway 125 had been put up for sale after the forestry team moved to the company's new Roanoke Valley Lumber sawmill in Weldon. That mill opened in February 2024 on a 200-acre Halifax County site, covers 375,000 square feet, created 137 local jobs, and was designed for 400 million board feet of dimensional lumber a year; Roseburg said it chose the site partly for its proximity to the Roanoke Rapids office. The NC Forest Service register still lists a Roanoke Rapids procurement contact buying southern yellow pine sawlogs.

Sawtooth Logging, Inc. is a timber buyer in Macon, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 7 counties, including Franklin, Granville, Halifax and Nash. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Most of what leaves this mill in the Inez community outside Warrenton is environmental silt fence stakes, treated against mold, and owner Warren Griffin has said the operation is "probably the largest producer in the country" of them. The mill runs about a million board feet a month with 85 employees. It also builds sweet potato storage boxes from dense oak, hickory and ash aimed at North Carolina growers and packers, sells new and used Class B pallets, heat-treats pallets to USDA export requirements, and sells seasoned firewood. Glenn "Smokey" Coleman started the business in 1985; Griffin bought it in 2002. It is owned and operated by parent company Louisburg Hardwood, Inc. alongside sister company Louisburg Box and Pallet, LLC, and the site states it is Pro Logger certified.

Southern Veneer Specialty is a timber buyer in Moncure, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Ply or Veneer Logs. It covers 48 counties, including Alamance, Anson, Beaufort and Bertie. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Stewart's Forest Services, Inc. is a timber buyer in Germantown, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 99 counties, including Alamance, Alexander, Alleghany and Anson. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Stone Timber Products, Inc. is a timber buyer in Sims, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 41 counties, including Alamance, Anson, Caswell and Chatham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Swain & Temple Inc is a logging contractor in South Mills, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

T E Garner Logging is a timber buyer in Gaston, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 5 counties, including Halifax, Hertford, Nash and Northampton. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Triangle East Timber Co Inc is a logging contractor in Mt Olive, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Virginia-Carolina Forest is a family owned and operated lumber company in Lawrenceville, Virginia. Owen M. Strickler, III, its president, bought the sawmill from Ezell Lumber Company in 1991, and he has worked in the forest products business for over 35 years. The mill saws hardwood and pine. It now produces approximately 10 million board feet of hardwood, kiln dried, and 12 million board feet of surfaced yellow pine. It handles yellow pine, cypress, yellow poplar, sweetgum, soft maple, black tupelo gum, red oak, white oak, hickory, ash and other hardwoods. It belongs to the Hardwood Manufacturers Association, the Virginia Forest Products Association and the American Hardwood Export Council. Export is a large part of the work: "integral part of our business," in its words, and the mill sits 100 miles from the port of Norfolk. The counties on its list are Bertie, Chowan, Franklin, Gates, Halifax, Hertford, Martin, Nash, Northampton, Pasquotank, Perquimans and Warren, all in North Carolina. It suits a landowner who wants to know the sawmills in this part of Virginia and North Carolina, and who is looking for a mill rather than someone to buy standing timber from the woods. From virginiacarolina.com, read 17 October 2026.

WestRock - Hopewell, VA is a timber buyer based in Hopewell, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Pulpwood and Standing Timber. It covers 7 counties, including Franklin, Granville, Halifax and Nash. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

The 100 Gaston Road plant is the Roanoke Rapids Kraft Paper Mill, producing bag papers, wrapping papers and linerboard — so what it wants off a tract is pulpwood and chips, not sawlogs. Following the WestRock and Smurfit Kappa merger the site now trades as Smurfit Westrock, the name it carries on the Roanoke Valley Chamber of Commerce manufacturers roll. Mill workers are represented by United Steelworkers Local 9-0425; at the time of the merger announcement WestRock said no discussions had taken place regarding any specific facility, and local economic development officials told the press they expected the deal to add stability. One thing to check before calling: the NC Forest Service Halifax County buyer list now routes procurement through WestRock's Hopewell, Virginia office rather than a Roanoke Rapids contact.

Weyerhaeuser - Ayden Lumber is a timber buyer in Ayden, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Sawlogs and Standing Timber. It covers 25 counties, including Beaufort, Bertie, Carteret and Chowan. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Wood Forest Resources, LLC is a timber buyer in Wilson, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: Southern Yellow Pine, Ash, Red Oak, White Oak, Hickory, Sweetgum and Yellow Poplar. Products: Standing Timber, Sawlogs and Pulpwood. It covers 69 counties, including Alamance, Anson, Beaufort and Bertie. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Woodridge Timber Inc. is a timber buyer in Jamesville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine and All Hardwoods. Products: Standing Timber. It covers 12 counties, including Beaufort, Bertie, Edgecombe and Greene. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Woodridge Timber Inc. is a timber buyer in Goldsboro, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine and All Hardwoods. Products: Standing Timber. It covers 20 counties, including Beaufort, Bertie, Craven and Duplin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.