Selling Timber in Pitt County, NC

Coverage across twenty-seven counties of the coastal plain, from Halifax and Northampton down through the Neuse basin to Onslow and Pender, and east into Hyde, Dare and Tyrrell. The service list is short — management plans, reforestation, stand improvement, appraisal, cruising, sale administration, logging engineering, taxation and marketing — which is the working end of a timber sale rather than a full-service consultancy.

A short service list, and a focused one: management plans, reforestation, stand improvement, the three timber-sale services, forest real estate, taxation, marketing and wildlife. Ten in all, near the narrow end of the register — this reads as timber-sale work rather than full-spectrum land consulting. What matters most is present, though: the firm can appraise a stand, cruise it and run the sale. Fifteen counties across the eastern coastal plain, from Halifax and Nash down through Pitt and Lenoir to the Pamlico and Carteret coast.

Twenty-one counties across the northeastern and central coastal plain, from Beaufort and Pitt out through the tidewater. The register credits appraisal, cruising and sale administration together — the full set for running a competitive sale instead of taking the first offer. Past that the list stays tight: reforestation, stand improvement, burning, herbicide, wildlife. One forester, no website listed.

Registration 536 sits 21st oldest among the 178 registrations on the N.C. Forest Service register — a long run on the state's list. Seventeen counties, all of them east: the tidewater and lower coastal plain from Beaufort and Hyde down through Craven, Jones and Onslow, with Edgecombe and Wilson at the inland edge. Appraisal, cruise and sale administration are all listed, plus forest taxation, prescribed burning and recreation management. ACF membership, which the association restricts to full-time consultants, and SAF. No website is listed.

Northeastern North Carolina, from the Albemarle counties of Camden, Currituck and Perquimans down through the Roanoke and Tar river country to Wake and Johnston — twenty-five counties in all. Twelve services, a working forester's list rather than a full-service consultancy: appraisal, cruise and sale administration, reforestation, timber stand improvement, prescribed burning and marketing. Both the Association of Consulting Foresters and the Society of American Foresters are on file, and the ACF admits full-time consultants only.

Based in Tarboro and working twenty-two counties across the northeastern coastal plain and up into the northern piedmont — Bertie, Hertford and Gates on one side, Orange and Alamance on the other. Fifteen services is a broad list, and it covers both halves of a landowner's problem: appraisal, cruising and sale administration for the harvest itself, then prescribed burning, herbicide, wildlife management and stewardship plans for what happens to the ground afterward. Forest taxation is on the entry as well.

Most of the coastal plain is in range here — Northampton and Halifax in the north, down through the Neuse and Cape Fear country to Brunswick — thirty-four counties in all, well above the register's median of twenty, with Caswell, Person, Lee and Moore attached on the piedmont side. Appraisal, cruise and sale administration are all listed, along with prescribed burning, herbicide application, forest real estate and forest taxation. Registration 578 is among the older on the register, and the firm holds ACF membership, which is limited to full-time consultants.

Appraisal, cruising and sale administration are all on this Wilson firm's register entry — the three pieces that let a forester value a stand, measure it, and carry the sale through to contract. Coverage is seventeen counties in the northern and eastern coastal plain, from Franklin and Nash out to Hyde and Washington on the sounds. Two less common additions sit alongside the usual work: forest taxation and environmental impact statements. Registration 1865 is one of the newer numbers on the state register.

Registration number 273 is the sixth-oldest of the 178 registrations on the state register — one of the longest-tenured entries anywhere in this directory. The footprint is small and coherent: thirteen counties across the upper coastal plain, Wilson, Nash, Edgecombe, Pitt, Halifax and Northampton among them. Nine services, clustered on the sale itself — appraisal, cruise and sale administration — with forest taxation and environmental impact statements alongside. SAF member; no website listed.

One of the oldest registrations in the state register sits behind this firm — number 517, eighteenth-oldest of the 178 listed — and there are two registered foresters here rather than one, which means the practice does not rest on a single person. Fifteen counties, compact: Wake and Franklin east through Nash and Edgecombe to Bertie, Martin and Northampton. Sixteen services in all, with forest taxation, recreation and Christmas tree management alongside the appraisal, cruise and sale administration a timber sale actually turns on.

Four services on the register, and three of them are the timber sale itself: appraisal, cruise, sale administration. That is about as narrow a list as the state register carries — no burning, no wildlife work, no real estate — from a firm whose registration is the 23rd oldest of the 178 on file. Eleven counties, tightly grouped through the upper coastal plain and the northern piedmont around Rocky Mount, Halifax and Warren. ACF membership means consulting is the full-time job here, not a sideline.

Timberlands Unlimited is a forestry consulting business out of Windsor, North Carolina. They've been doing this since 1980, when David L. Jennette Sr. started the company to bring independent forest management help to landowners in Eastern North Carolina and Southeastern Virginia. They handle the full range of what a landowner usually needs: forest management plans and mapping, timber cruising, appraisals, sale preparation and contract administration, reforestation, timber stand improvement, herbicide application, wildlife management, stewardship plans, and forest real estate. On the species side they work with loblolly pine and hardwoods like beech, hickory and oak. Their own staff does the timber cruising, appraisals and sale preparation, while reforestation work is contracted out but supervised by them. "Timberlands can handle any timber sale as the owner directs," whether that means a selective cut, a thinning, or a clearcut. The business carries the credential N.C. Registered Forester #638, and lists a reach across two dozen counties in Eastern North Carolina, including Beaufort, Bertie, Camden, Chowan, Craven, Currituck, Duplin, Edgecombe, Gates, Greene, Halifax, Hertford, Hyde, Jones, Lenoir, Martin, Northampton, Pasquotank, Perquimans, Pitt, Tyrrell, Washington and Wayne. There's no stated minimum acreage, but their timber sale listings include tracts down to township-level parcels like the Jackson Heirs Tract in Gates County, so small, specific tracts are clearly within what they'll take on. This looks like a fit for a landowner in Eastern North Carolina or Southeastern Virginia who wants a long-standing, staff-run consulting outfit to handle a sale or a management plan from start to finish, rather than a one-person operation. From timberlandsunlimited.com, read 10 October 2026.

Concentration is the whole point here — nine adjoining counties around New Bern, taking in the lower Neuse, the Pamlico and the coastal plain behind them, about as tight a footprint as this directory holds. Eleven services, a working forester's list rather than a full-service consultancy, but it takes in the three that matter for a sale: appraisal, cruise, and administering the sale through to contract. Logging engineering is on there too, which speaks to tracts with access problems.

Roxobel sits in Bertie County, which puts this firm's office in the middle of the fourteen counties it covers — the Albemarle and the northeastern coastal plain. That is the argument for a firm like this: the same ground, over and over, rather than a territory spread thin. The register lists appraisal, cruising and sale administration, the three that let a firm value a stand and then run a competitive sale on it, plus logging engineering and wildlife management. No website is on file.

The register gives Interstate Forest Products forty-five counties — the whole coastal plain from the Virginia line to South Carolina, plus a run up into Franklin, Granville and Warren — and eight services, appraisal and cruising among them but not sale administration. The firm's own site fills that gap. It describes itself as “a forestry consulting company serving Virginia and North Carolina,” trades as Interstate Forest Products LLC, and was founded in 2011 by Chuck Little after sixteen years buying timber for firms including Georgia-Pacific and Coastal Lumber; it says IFP is listed as a consulting forester in both states, with thirty years in these local timber markets. Most of the site is given over to the timber sale, run as a sealed bid: the cruise and appraisal that set a minimum bid never disclosed before the sale, a sale notice sent to buyers with the cruise attached, a sale map showing acres, access and harvest boundaries, three to four weeks for bidders to cruise it, bids read aloud on the day, and a thirty-day close in which the buyer runs the title search, prepares the timber deed and pays in full, timber rights usually running two years. Thinnings are handled differently: sold per ton, treated as a silvicultural treatment rather than a harvest, and awarded on the operator's care — the firm writes it would rather take a few cents less and be left with a good stand. Management plans are the other main line: acreage, ownership, location and objectives; stands divided by age, timber type, soil type and condition; soil maps and photographs; per-stand recommendations and a schedule by year. The site notes an up-to-date plan is required for reforestation cost share, and recommends replanting clearcuts with improved loblolly pine seedlings in late fall or winter, with site prep spray or bedding where needed and longleaf, shortleaf or hardwood alternatives where cost share helps. Another page argues there is no timber price index to watch, and that local mill conditions and logging weather matter more. The site publishes N.C. Registered Forester #1429, N.C. ProLogger certification and N.C. Forestry Association membership. As described on interstateforestproducts.com, read 23 September 2026.

Eleven counties across the lower Neuse and the central coastal plain — Craven, Pitt, Onslow, Lenoir and their neighbors — worked by a single registered forester. The register credits the firm with timber appraisal and cruising but not sale administration, so a landowner planning a competitive sale should ask directly how that piece gets handled. Where the entry runs unusually deep is the land-management side: prescribed burning, herbicide application, wetland delineation, wildlife work and Christmas tree management sit alongside the planning and reforestation services.

Fifty-nine counties from a one-forester office in Beulaville — effectively the whole coastal plain, from the Currituck and Dare marshes south to Brunswick, plus a long reach west through the Triad into Surry and Yadkin. Eighteen services puts this firm near the top of the register for breadth, and two of them are worth noticing: wetland delineation and environmental impact statements, which matter if the tract has bottomland or a permitting question attached to it. Valuation, cruising and sale administration are all covered. No website is listed.

Seven services, and they are the ones that sell timber: management plans and mapping, stand improvement, appraisal, cruise, sale and contract administration, utilization and marketing, wildlife. That's a working forester's list rather than a full-service consultancy. The territory is wide for it — 30 counties taking in most of the coastal plain, from the Albemarle and Dare south through Craven and Onslow, with a reach inland to Franklin and Warren. Edenton office; no website listed on the register.

For a tract anywhere between Raleigh and the coast, this firm's whole range covers that corridor: eighteen counties running from Wake and Franklin east through Johnston, Wayne and Lenoir out to Carteret, Pender and New Hanover. Appraisal, cruising and sale administration are all on the entry, which is the combination that lets a firm value a stand, measure it, and run the sale itself. Eleven services in all — a working timber list rather than a broad environmental practice. No website is listed.

Eight services and nothing extra: management plans and mapping, reforestation, stand improvement, appraisal, cruising, sale administration, logging engineering, and utilization and marketing. That is a narrower list than roughly nine in ten firms on the register carry, and pointedly built around getting wood measured, valued and sold. Twenty-one counties, spread from Alamance and Orange in the piedmont east through Wake, Johnston and Nash and down into Sampson, Duplin and Pitt.

Every county in North Carolina is listed against this firm — all 100 — which puts it in the small group on the register that will work anywhere in the state. The service list is narrow by comparison: ten entries, built tight around the sale itself, with appraisal, cruising and sale and contract administration at the middle and forest taxation, utilization and marketing, urban forestry and stewardship plans around them. Both ACF and SAF memberships are recorded. One registered forester covers that ground, which is worth knowing when you're arranging a visit.

Surveying and wetland delineation sit on this firm's service list alongside the forestry work, which matters more than it sounds: a boundary question or a wet corner of a tract can be dealt with on the same visit as the cruise. Sixteen counties, most of them in the southeastern coastal plain between Sampson and the lower Cape Fear, with a few reaching north to Wake and Franklin and one as far west as Gaston. Appraisal, cruising and sale administration are all on the register, so the firm can carry a sale from valuation through to contract.

Forty-six counties, close to half the state, and nearly all of it east of the piedmont: the Roanoke and Tar drainages, the full northeastern coastal plain, south through Craven and Onslow, out to Dare, Hyde and Tyrrell, with a western reach into Guilford, Alamance and Durham. Very few firms on the register cover that much ground with a single registered forester. Fifteen services, from appraisal, cruise and sale administration through prescribed burning, herbicide work, recreation and urban forestry. No website is listed.

Every service the state's A–U schedule covers is on this record — all twenty, more than 98 percent of firms on the register. So the timber-sale core of appraisal, cruise and sale administration sits alongside surveying, wetland delineation, prescribed burning, Christmas tree management and urban forestry. A landowner with a boundary question or a wet corner can get both answered on the same visit as the cruise. Coverage spans forty counties, from the north-central piedmont down through the sandhills and out to the southeastern coast. Memberships in the Society of American Foresters and the International Society of Arboriculture are recorded; no website is.

Effectively the eastern two-thirds of the state: sixty-eight counties covering every county on the coastal plain and most of the piedmont, which puts this among the widest-reaching listings on the register. Two registered foresters, the older registration numbered 914. The sale trio is present — appraisal, cruise, contract administration. Surveying is on the service list as well, alongside forest real estate and urban forestry, so a boundary or title question does not need a second firm. On its own site the business trades as Carolina Forestry & Realty, a privately owned professional corporation held by co-owners Keith Brouillard and Rodney Finkbiner and recognised by the N.C. Board of Registration for Foresters as a Professional Forestry Company, working in North Carolina and Virginia and claiming more than 30 years of it. Timber is sold for the landowner on a lump-sum sealed-bid basis, the site saying a sale can draw five to ten bids, after an appraisal done by cruising on larger even stands or by tree count on small or irregular ones. Beyond the sale it lists timberland investment analysis, comprehensive management plans with growth-and-yield and economic projections, pulpwood and residential or development thinnings, disease and pest management, property tax reduction, damage and trespass appraisals and boundary line maintenance. The forestry side sits next to a working rural land brokerage: both owners are licensed brokers and Realtors and the firm publishes its own listings, so a landowner deciding between selling timber and selling the tract can put both questions to the same office. As described on carolinaforestry.com, read 22 September 2026.

Seven registered foresters is the top of the range on the state register, and it comes attached to eighty-four counties — mountains to the Outer Banks, with very little of North Carolina out of reach. Scale like that means a landowner isn't waiting on one person's calendar, and it means the firm doesn't vanish when someone retires. Nineteen services: wetland delineation, environmental impact statements, forest taxation and urban forestry, alongside the appraisal, cruise and sale-administration combination a competitive timber sale actually runs on. ACF and SAF. The firm trades as GFR Forestry Consultants and dates itself to 1964, and it works from four North Carolina offices — Raleigh, Lillington, Tarboro and Lake Waccamaw — with its published service area running beyond the state line into South Carolina, Virginia, Maryland and the Eastern Shore. Its own account of a timber sale runs from stand assessment through a sale announcement and marketing plan to bid management, handled by foresters it says keep current on local buyers, pricing and competition; on the management side it names timber inventory and valuation, timber trespass analysis, forest management planning, GIS mapping, boundary line location and maintenance, pulpwood thinning, pest and disease control, fire protection measures and hunt and lease management. Two services sit outside the usual consulting list: timber basis determination and tax planning for estates and long-held family land, and wood flow and logistics work for landowners or businesses moving product to buyers. It also runs a rural real estate side, brokering timberland, hunting and agricultural tracts through licensed N.C. brokers. As described on gfrforestry.com, read 22 September 2026.

Rudd Forestry, PLLC works out of Raleigh, and the directory records coverage of forty-six counties reaching from the Rockingham and Forsyth line east through the Triangle out to Pitt, Onslow and Pender. The firm says its aim is to help landowners achieve their goals for their forestland, and that it works in North Carolina and Virginia. Its services page describes tailored management plans for forest health and long-term sustainability, timber appraisal covering volume, value and forest health, planning and management of timber sales and harvests, site-specific reforestation, boundary line marking, property security against trespassing, theft and poaching, GIS mapping, hunt lease management, wildlife habitat improvement, forest conservation, outdoor recreation planning, and help buying and selling North Carolina farms and timberland. Owner Thomas Rudd holds a forest management degree from North Carolina State University and states sixteen years as a consulting forester and fourteen as a licensed North Carolina real estate agent, together with arborist certification, a drone certification and standing as a certified tree farm inspector. As described on ruddforestry.com, read 22 September 2026.

Albemarle Land and Timber Services, Inc. is based in Elizabeth City, North Carolina, and works with landowners on both timberland and real estate. A Registered Forester and Consulting Forester handle the work, and the company is also a licensed NC Real Estate Corporation. The services cover a lot of ground: forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimate, timber sale and contract administration, logging engineering, prescribed burning, and more, down to the basics like thinning and painting boundary lines. Species handled include Loblolly Pine, Slash Pine, Long Leaf Pine, hardwood, and Bald Cypress. When it's time to sell, they cruise and appraise the timber, locate the boundaries, and flag streamside zones or other areas that need protection before the sale. They also look at your tax basis in the timber, since that can affect what you owe on the sale. Once a time line is set, they run a sealed bid sale or a contract sale, aiming "to take full advantage of competitive timber markets, thus maximizing your dollar." They say this approach "insures top dollar is paid for the timber." The service area for timber sales and management runs from Eastern North Carolina up through Southern Virginia, with named coverage in Beaufort, Bertie, Camden, Chowan, Currituck, Dare, Gates, Hertford, Hyde, Martin, Pasquotank, Perquimans, Pitt, Tyrrell, and Washington counties. The forester holds N.C. Registered Forester credential #1045. This fits a landowner in the northeastern North Carolina counties who wants one outfit to handle the forestry side and the paperwork side of a timber sale, including the tax questions that come with it. From nclandandtimber.com, read 10 October 2026.

If your land is in the Albemarle — Currituck, Camden, Pasquotank, Perquimans, Chowan — this is a firm working from inside it, and the coverage carries twenty-nine counties down the coastal plain through Pitt and Lenoir to Onslow and Carteret. The full sale set is on the register: appraisal, cruise, sale administration. Forest taxation and forest real estate round out an eleven-service list. No prescribed burning is listed, which is worth knowing if that's part of what you need. ACF and SAF.

The office is in Charlottesville, Virginia, a good way over the state line, but the North Carolina coverage is nothing marginal: 64 counties, wider than 93 percent of firms on the register. That takes in the whole piedmont and coastal plain east of the mountains, from Currituck and Brunswick inland to Surry and Rockingham. Two registered foresters, fifteen services — wetland delineation and environmental impact work sitting alongside the appraisal, cruise and sale-administration set — and ACF membership. The company website is a corporate one and says nothing about any particular North Carolina office or county: it states only that F&W's foresters are located throughout the United States, South America and Europe, and points visitors to a find-your-local-forester map. What it does set out is the firm behind the local contact. F&W says it was founded in 1962 by Eley Frazer and Frank Wetherbee, is headquartered in Albany, Georgia, and manages millions of acres of forestland worldwide; its published timeline runs from regional inventories and forestland appraisals in the 1970s, through growth from 25 employees in two states to 100 in eight states during the 1990s, to expansion into Uruguay and Brazil and the Tree Farm Group certification in the 2000s and the acquisition of Fountains US and UK in 2016. Eight service lines are published — timber sales, property management, field support services for TIMOs and REITs, forest inventory and mapping, forestland accounting, technical and analytical work, real estate, and natural capital. On timber sales specifically the firm describes pre-harvest valuation reporting on species, age and condition, sale layout and marketing to match timber to the best market, then on-site harvest supervision: harvest inspections and reporting, streamside management zone delineation, BMP compliance audits, timber marking, boundary re-marking and road maintenance oversight, with Phase I Environmental Site Assessment available during property transactions. As described on fwforestry.com, read 22 September 2026.

R.B. Klass Forestry Services, based in Cary, North Carolina, is listed as a forestry consultant and also as a timberland broker. The work on offer covers forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, logging engineering, forest real estate, forest taxation, and utilization and marketing. Its own pages describe building land management plans, "usually covering 10 years or more," based on an analysis of timber stands and what the landowner wants. It works in pine and hardwood, and also pine straw. Thinning work ranges from pre-commercial thinning in young pine stands to commercial pulpwood thinning, crop tree release, and commercial improvement cuts in hardwood and mixed stands, with trees marked by hand depending on the age, size, and stocking of each stand. Reforestation work includes site preparation, seedling selection, and cost share paperwork, and it says it searches out "the best genetically improved seedlings on a tract-by-tract objective basis." It also offers Tree Farm certification, prescribed burning, wildlife habitat work, and hunting lease negotiation. It serves Bertie, Camden, Chowan, Currituck, Edgecombe, Franklin, Gates, Greene, Halifax, Hertford, Martin, Nash, Northampton, Pasquotank, Perquimans, Pitt, Warren, Wayne, and Wilson counties. It holds an N.C. Registered Forester credential (provisional), #472, and has been "helping landowners reach their goals since 1983." The smallest job shown on its pages is the Linden Tract on the Lower Little River, a roughly 306 acre property, which gives a sense of the scale it has handled. This suits a landowner with a larger timber tract who wants a full management plan built around it, not just a quick one-off sale. From ncforester.com, read 10 October 2026.

Seven registered foresters — as many as any firm on the state register — and sixty counties covered, which together make this one of the largest consulting operations working in North Carolina. The reach runs from the foothills in Burke and McDowell across the piedmont and the sandhills to the coast at Brunswick, Onslow and Carteret. The full sale package is here: appraisal, cruise, and running the sale through to contract. Nineteen services in all, including prescribed burning, wetland delineation, environmental impact statements and forest taxation — which matter when a timber sale is one piece of a larger land or estate question. The company's own website is a national corporate one rather than a local office page, and it describes a firm of that scale: a corporate office in Charlotte, offices across the Northeast, Southeast, Lake States, Pacific Northwest and Gulf regions, and almost sixty years spent helping landowners manage, sell, buy, improve and enjoy millions of acres — AFM dates itself to 1966, when Bartow S. Shaw, Jr. formed the predecessor firm Bartow Shaw and Associates. It states a size threshold for the land management work in its own words: property of fifteen acres or more. The published service lines run well past timber alone — timber sales and timber management, reforestation and silviculture, forest inventory to establish volumes and values, wildlife services and habitat restoration, environmental services, forest carbon, land surveying, wood flow for navigating fibre supply agreements, farmland management through AFM Ag Services, and forestry and property accounting handled by a dedicated team of about twenty including CPAs on staff, covering property tax administration, audit support and hunt lease administration. Forest certification is offered too: the firm says management operations are conducted under FSC, SFI and ATFS guidelines. As described on americanforestmanagement.com, read 22 September 2026.

Two registered foresters rather than one, so the firm does not hang on a single person's calendar, covering twenty counties across the Albemarle and the northeastern coastal plain down to the Neuse. Fourteen services, prescribed burning and herbicide application included, and membership in the Association of Consulting Foresters. The firm dates its founding to 1974 and works from Ahoskie across eastern North Carolina, and it states plainly that it is independent of logging companies and sawmills while keeping working relationships with them — the distinction that matters when a landowner is deciding who represents them in a sale. Its timber sales follow a published seven-step process, from reading the stand and the market to choosing the sale type (pay-as-cut, lump-sum, trade, select cut, thinning or clearcut), administering it, monitoring the harvest against N.C. Best Management Practices and replanting afterwards, with reforestation stock named as loblolly, shortleaf and longleaf pine plus hardwood and wildlife species. Plans come in three published kinds — harvest and thinning, burn, and wildlife — with worked examples of each posted on the site, and the firm also does drone aerial photography and GIS mapping in-house and helps landowners apply for FSP, FMI, CRP, EQIP and other NRCS programmes. On the earlier caveat about valuation: the site does advertise appraisals, though framed as real estate work, saying it has brokers and appraisers who handle farmland and timberland of any size, so it is worth asking specifically whether a standing-timber appraisal is included. The firm publishes its own running tallies of 265,000 acres under management and 633 local clients served. As described on efmnc.com, read 22 September 2026.

Premier Forestry & Environmental Consulting, PLLC is a consulting forestry and environmental practice based at Jacksonville, N.C., carried on the N.C. Forest Service consulting register for eight counties around the lower Neuse and the central coast — Onslow, Craven, Carteret, Pamlico, Jones, Lenoir, Beaufort and Pitt — and billing itself on its own site as an Eastern North Carolina forestry and land management firm. Its published service lines are forest management (long-term management planning, Present Use Value applications, timber sales, harvesting supervision, timber inventory, timber appraisal and boundary line maintenance); prescribed burning (fuel reduction, site prep, silvicultural and wildlife enhancement burning, with low-impact fireline installation and maintenance); herbicide application, ground-based via skidder and ATVs, covering site prep spray, mid-rotation release and food plots; GIS/GPS mapping; wildlife management; environmental services covering wetland delineation, impact permitting and BMP compliance; technical data collection; and expert witness work. Timber appraisal appears on the firm's own site although the register entry does not carry it, which answers a question the earlier description here left open. The firm operates its own herbicide skidder and bulldozer. President and senior forester Seth A. Ward earned a B.S. in Forest Resources and Conservation from the University of Florida in 2003, worked for the Florida Division of Forestry as a state lands forester at Tate's Hell State Forest and then as Putnam County Forester, joined the environmental consulting firm ESI in 2005 and opened and led its Eastern North Carolina branch office in 2006, then left in late 2009 to form Premier Forestry; in early 2011 the firm acquired Comprehensive Forestry Services, Inc., gaining five experienced employees and new service lines. Ward is N.C. Registered Forester #1611, a member of the Association of Consulting Foresters and a past chair of its N.C. chapter, a Certified Master Tree Farm Inspector, N.C. Certified Prescribed Burner #682, a N.C. and Virginia licensed pesticide applicator and a N.C. ProLogger; he sits on the Forestry Advisory Council for Wayne Community College and advises the Onslow County Career & Technical Education Program. Five staff are named in all: Ward; forestry technician Angelo Chimonas, who served in the United States Marine Corps from 2001 through 2023, finishing as a master sergeant, joined through the SkillBridge program and oversees logging and the skidder spray work; equipment operator Scott Adams, with over 25 years operating a bulldozer in forestry applications and skilled on the spray skidder; bookkeeper Brenda Garvey, who joined in January 2018; and office manager Taven Ward. (source: premierforestry.net, read 22 September 2026)

Land, Farms & Timber, Inc. is based in Lake Waccamaw, North Carolina, and is listed as a forestry consultant, also doing timberland brokerage. Its register entry lists forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimate, timber sale and contract administration, prescribed burning, forest real estate, recreation management, and utilization and marketing. It states N.C. Registered Forester #586. It serves a long list of North Carolina counties, including Bladen, Columbus, Robeson, Sampson, Duplin, Cumberland, Johnston, Moore, Richmond, Scotland, Stanly, Union, Anson, Montgomery, Chatham, Lee, Harnett, Hoke, Rockingham, Alexander, Alleghany, Ashe, Avery, Burke, Caldwell, Watauga, Wilkes, Beaufort, Carteret, Craven, Dare, Hyde, Jones, Lenoir, New Hanover, Onslow, Pamlico, Pender, Pitt, Tyrrell, and Washington. This fits a landowner in eastern or western North Carolina who wants someone offering both forestry consulting work, such as a timber cruise or a management plan, and help selling forest real estate, under one listing. From advancelandandtimber.com, read 10 October 2026.

All 100 counties, which only a handful of firms on the state register can claim — wherever the tract sits in North Carolina, this one covers it. Two registered foresters, and the older of the two registrations is number 482, sixteenth-oldest of the 178 on the register. Appraisal, cruise and sale administration are all here, so a landowner can value the stand, measure it and run the sale through to contract in one place. Seventeen services in all, out as far as Christmas tree management, urban forestry and forest taxation. The firm holds Association of Consulting Foresters membership, which is limited to full-time consultants. The firm calls itself family owned and says it has run a consulting forestry business for over 40 years; William H. Lock has retired from full-time forestry work and his son Jonathan C. Barnes, who passed the state forestry exam in 2002, now runs the company as president. Alongside state registration in both North Carolina and Virginia it claims Certified Forester and Certified Arborist credentials, Tree Farm Inspector status and Technical Service Provider approval for NRCS cost-share programs, and it offers work turn-key — timber inventory, marketing, harvest inspection and reforestation through one office — plus timber tax basis estimates, timber trespass reports, growth models for income projections and landowner seminars and field tours. Real estate is the one thing it has pulled back from: the site says that side is now limited to advice and referrals rather than listing and selling land. Its public timber sale notices, bids taken sealed at the office, run from 2010 through 2021 and cover tracts from a few acres up to about 280, clustered in Rockingham, Guilford, Alamance and Caswell counties and over the line into Henry and Pittsylvania counties, Virginia. A first consultation is offered free. As described on whlock.com, read 22 September 2026.

Milliken Advisors Inc. is a forestry consulting and timberland brokerage business in Columbia, North Carolina. It works with landowners on the kind of jobs that come with owning timberland, from planning a sale to planting trees back after a harvest. The work on offer covers forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, insect, disease and fire protection, prescribed burning, forest real estate, recreation management, forest taxation, utilization and marketing, herbicide application, and stewardship plans. The forester holds N.C. Registered Forester credential #1394. Milliken Advisors serves landowners across a long list of North Carolina counties, among them Wake, Mecklenburg, Guilford, Buncombe, and Dare. The business has been working with landowners since 1949. Its own description of how a job runs is plain: "Once we know what you want, we take a good look at your land: its current state, what's happening in the market, and what the future could hold. Then we build a strategy that actually fits your needs." On follow-through, it says "You don't have to worry about juggling contractors or chasing down deadlines." This fits a landowner who wants one firm to handle a timber sale or a management plan from start to finish, rather than piecing the work together themselves. From millikenadvisors.com, read 10 October 2026.

Work concentrated in eastern North Carolina — the inner coastal plain around Greenville, Goldsboro and Kinston, out to Carteret and Pamlico on the sound — sixteen counties in all, run from an office over the line in Dorchester, South Carolina. The register credits the firm with appraisal, cruising and sale administration, the set a competitive timber sale needs, along with reforestation, herbicide application and stewardship planning. It belongs to the Society of American Foresters.

All one hundred counties — one of the few listings on the register that covers the entire state. The registration here is number 8, the second-oldest of the 178 registrations on the register, which is about as long a tenure as North Carolina forestry has to offer. Beyond the sale work of appraisal, cruise and contract administration, this firm surveys, so a boundary question and a timber cruise can be settled on the same visit. Christmas tree management, wetland delineation and environmental impact statements are also listed.

Statewide coverage — all 100 North Carolina counties — from an office in Gainesville, Georgia. Fifteen services are recorded, including the three that make a timber sale work: appraisal, cruising, and sale and contract administration. Prescribed burning, herbicide application, urban forestry and stewardship plans fill out the rest. The register carries this entry under the name US Forest Service, with one N.C. Registered Forester and no website given.

Worth reading the service list closely here. The register credits this entry with timber cruising and sale administration but not timber appraisal — so the valuation step most landowners want before going to market isn't among the listed services. What is listed is broad: 48 counties across the northeastern piedmont and most of the coastal plain, plus reforestation, forest real estate, wildlife management and stewardship plans. The office address is Atlanta, Georgia. No website is on file.

Hunt Forest Resources, LLC is a timber buyer based in Moncure, North Carolina, with forestry consulting, firewood, and wood recycling run alongside it. They buy stumpage, sawlogs, pulpwood, and chip-n-saw timber in pine and hardwood, and they also handle forest management plans and mapping, timber cruise and volume estimates, timber appraisal, timber sale and contract administration, reforestation, timber stand improvement, prescribed burning, herbicide application, insect and fire protection, and wildlife and recreation management. Their registered forester holds N.C. Registered Forester #1438, and the company carries ProLogger and American Tree Farm System (ATFS) standing. They work across a long list of North Carolina counties, from Alamance, Durham, and Wake, through Chatham and Moore, down to Brunswick and New Hanover, and out east to Dare, Hyde, and Beaufort, along with many others. On their own pages they describe offering "a diverse range of services that span the entire lifecycle of forest products, from land and timber management to sustainable harvesting, real estate services, wood products manufacturing and beyond," and say they manage "7,000 acres of timberland annually" across four facilities in the state. This suits a landowner who wants one outfit that can buy the timber, write the management plan, and keep an eye on the ground afterward, rather than stitching together a buyer, a consultant, and a logger separately. From huntforestry.com, read 10 October 2026.

Corbett Timber Company is a timber buyer, logger, and forestry consultant based in Wilmington, North Carolina. They buy "every standing timber type", as well as soft hardwood logs for mills and other manufacturing use, and they work with Long leaf pine and Loblolly pine among other species. Their harvest work covers clear cut, row thinning, select thinning, residential thinning, seed tree, shelter wood, swamp logging, whole tree chipping, brush reduction, and fuel chipping. Past jobs include thinning on Long leaf pine and Loblolly pine plantations, and a residential thinning where a chipper was used to clear underbrush. Beyond the harvest itself, they offer timber appraisals, GIS mapping, marketing and merchandising advice, reforestation, and management plans, along with procurement services. Their staff includes Registered Foresters and Certified Tree Farm Inspectors. The business traces its timber brokerage work back to the mid-1980s, building on generations of logging before that. They serve New Hanover County. A minimum of 10 acres applies, stated on their contact page as "Property Location & Size (Minimum 10 acres required)". This fits a landowner with a mixed pine or hardwood tract who wants one company to handle the cut, the paperwork around it, and the replanting after, rather than hiring separate people for each step. From thecorbettcompanies.com, read 10 October 2026.

In business since 1958 — both the Better Business Bureau and Manta independently record that start date — Rankin Timber is a small shop, two to four employees, that pairs buying with consulting forestry. Its Manta listing describes the firm as buyers of standing timber, timber brokers and North Carolina Registered Foresters, offering forest management plans, forest management and wildlife management. For a landowner, that means the harvest can be planned and represented rather than simply bid on, which is unusual for an operation this size. Nearly seventy years in business gives it a longer track record than most buyers working the New Bern area.

Carolina Timber Thinning is a mill in Greenville, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

N.C. Forest Products, Inc. is a timber business in Greenville, North Carolina. It is listed under timber buyers. Its products are standing timber, sawlogs, pulpwood and fuel chips, and it covers all hardwoods and all softwoods. The counties it serves are Beaufort, Bertie, Carteret, Craven, Edgecombe, Greene, Lenoir, Pitt and Washington. Standing timber and sawlogs are the first products it names, and pulpwood and fuel chips come after them. A landowner with a tract in one of those counties can check whether those products and species fit what is growing on the land. It suits a landowner in one of those nine counties who has hardwood or softwood stands and wants to talk with a buyer about standing timber, sawlogs, pulpwood or fuel chips. From gandgforestproducts.com, read 10 October 2026.

Pamlico Land & Timber Compan is a timber buyer in Washington, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Chip-N-Saw Logs, Ply or Veneer Logs, Pulpwood and Chips. It covers 6 counties, including Beaufort, Bertie, Hyde and Martin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Weyerhaeuser - Ayden Lumber is a timber buyer in Ayden, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Sawlogs and Standing Timber. It covers 25 counties, including Beaufort, Bertie, Carteret and Chowan. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Panel and veneer production, not sawn lumber, is what happens at the Corinth Road plant: the Forest Products Locator classifies the facility as “Veneer Plywood Panels” and records it as taking both softwood and hardwood. The Manufactured in North Carolina supplier database lists 256 employees on site and gives the product line as composite panels and mouldings. The plant belongs to ARAUCO, which describes itself as a global forest products manufacturer with more than 50 years of manufacturing experience and distribution to over 3,500 destinations across North America. Its place on this list as a timber buyer comes from the NC Forest Service register.

Registered with the Better Business Bureau as Bay River Logger, LLC — singular — with a business start date of March 2005, twenty-one years working the counties around New Bern. The BBB file matches this listing's street address on Sand Hill Rd and its phone number exactly, which is the only independent confirmation the business exists; the BBB record itself is unrated and carries no reviews. No website, Facebook page or trade coverage was found.

Buck Timber Co is a mill in Grantsboro, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

The New Bern office is one branch of a timber merchant that says it was established in 1937, is headquartered in Conway, South Carolina, and runs more than three dozen field offices across seven southeastern states with over 100 timber buyers on staff. Canal Wood buys and markets veneer logs, sawtimber, chip-n-saw, pulpwood and fuel chips, and it is certified by the Forest Stewardship Council. Alongside buying, the company does management planning, thinning and harvesting, and a subsidiary, Canal Land & Timber, LLC, handles land sales. The Better Business Bureau records five other Canal Wood locations in North Carolina — Wallace, Nashville, Roanoke Rapids and Fairfield among them — and gives this office a street address at 810 Washington Post Rd.

Carolina Pine & Hardwood Inc is a logging contractor in Windsor, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Coburn Forest Products LLC is a timber buyer in Winton, North Carolina. It buys standing timber from landowners, and it also does logging work. It buys both hardwoods and softwoods. Its buying area runs from central and southern Virginia to northeastern and central North Carolina, roughly 100 miles out from the business. The counties it names are Bertie, Chowan, Edgecombe, Franklin, Gates, Halifax, Hertford, Martin, Nash, Northampton, Pitt, Warren, Washington and Wilson. Tracts are bought either lump sum or pay-as-cut. The services are conventional logging, thinnings and low-ground logging. Its logging page also covers clear cuts, which remove all the trees from an area and are most common in pine and hardwood forests. The business describes its cutting as "Designed to cut to the landowner's specifications and needs", whether the job is commercial or private. The company was started in 2007. Ronald Coburn has 41 years of timber buying behind it. All of its loggers are NCFA Pro-Logger trained and certified, or SHARP logger certified. Ronald is joined by his son Mark, daughter-in-law Elise, Mike Pollard and Amy Mejia. It suits a landowner in one of the named counties who wants to sell standing timber by lump sum or pay-as-cut, or who wants a thinning done with the cut set to their own plans. From coburnforestproducts.com, read 26 October 2026.

Conetoe Land & Timber, LLC is a timber buyer in Goldsboro, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 18 counties, including Beaufort, Bertie, Chowan and Durham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Crawley Timber Company is a logging contractor in Kinston, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Duplin Forest Products, Inc is a timber buyer in Wallace, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 12 counties, including Beaufort, Carteret, Craven and Duplin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

East Coast Timberland Inc. is a timber buyer in Nashville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Chips. It covers 40 counties, including Beaufort, Bertie, Carteret and Chatham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Incorporated in April 1974, Elkins Sawmill is run by three officers who all share the family name. The Better Business Bureau rates it A+ — the company is not BBB accredited — and describes the product line as lumber, crossties, mulch and firewood, broader than the stumpage, sawlog and pulpwood purchasing the state register records. Besides the King Road mill in Moncure, the company also operates from an address in Goldston. It appears in the North Carolina Forestry Association's Buyer's Guide under timber buyers, though that guide carries non-member businesses alongside members, so membership should not be assumed.

Enviva Pellets Southampton, LLC is a timber buyer based in Franklin, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Chips, Pulpwood and Standing Timber. It covers 47 counties, including Beaufort, Bertie, Bladen and Camden. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Evans Logging, Inc. is a timber buyer in Jamesville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 12 counties, including Beaufort, Bertie, Edgecombe and Franklin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Flowers Timber Co., Inc. is a mill in Seven Springs, North Carolina. It has a Google Maps business listing in that category. It is also listed as a logging contractor. A listing here is not an endorsement.

Fordham Timber Co is a timber buyer in Selma, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Chip-N-Saw Logs, Ply or Veneer Logs, Pulpwood and Poles. It covers 13 counties, including Duplin, Edgecombe, Franklin and Greene. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Four Seasons Timber & Land Co is a timber buyer in Fremont, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber. It covers 18 counties, including Beaufort, Bertie, Craven and Duplin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Unlike most stumpage buyers in Halifax County, Kerr runs its own log trucks. Federal motor carrier records under USDOT 337205 list eight power units and three drivers as of the August 2025 MCS-150 filing, and the cargo classification covers "Logs, Poles, Beams, Lumber" alongside "Machinery, Large Objects" — meaning the company hauls its own harvesting equipment onto a tract as well as the wood off it. An industrial directory describes the business as wholesaling rough, dressed and finished lumber and offering logging and forest management services, so it does more than buy stumpage. The NC Forest Service register records it as buying all hardwood and all softwood species, broader than the mixed-hardwood entry the listing was built from. No website, Facebook page or published reviews were found.

Jerry G Williams & Sons Lumber Inc. is a sawmill in Smithfield, North Carolina. They buy standing hardwood and pine timber, and they also run a separate logging crew through a partnering company, JMW Logging and Timber Company, along with contract loggers who cut and supply logs to the mill. They work in Poplar, Ash, Cypress, Red and White Oak, and Southern yellow pine. The mill sits in the Piedmont region of North Carolina and draws its timber base from both the Appalachian and Southern forests. Jerry G Williams & Sons Lumber Inc. lists Johnston County as an area it serves. They say "We buy standing hardwood and pine timber," and their lumber services go on to cover kiln drying, width sorting, NHLA grading, export prep, container loading, and mixed truck loads. They follow State Forestry Best Management Practices, and they support the Pro-Logger education program and the landowner education incentives under the Sustainable Forestry Initiative. The company started back in 1986, when Jerry Williams bought a former Union Camp sawmill in Smithfield. It has stayed a family operation since, now run by his grandson Kevin Williams as Vice President overseeing mill operations. This one suits a landowner in or near Johnston County with standing hardwood or pine timber to sell, who also wants a mill that can take the logs all the way through to kiln-dried lumber. From jerrygwilliamslumber.com, read 10 October 2026.

Josey Lumber Co. Inc. is a timber buyer in Scotland Neck, North Carolina. It has a Google Maps business listing in that category. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Lancaster Timber Co. Inc. is a timber buyer in Mount Olive, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber. It covers 12 counties, including Cumberland, Duplin, Edgecombe and Harnett. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

In business since October 2001 according to its Better Business Bureau file, Mark & Sons runs a small operation by federal numbers: the FMCSA lists a single power unit and two drivers under USDOT #3909887, registered for intrastate work only. The BBB has had a file open on the company since 2010 but has never issued a rating, saying it lacks sufficient information to do so, and the company is not accredited. The DOT registration also carries a mailing address in Sanford, a different part of the state from the Plymouth yard. No website, Facebook page or published review was found.

Michael L. Goodson Logging, Inc. is a timber buyer in Jacksonville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 14 counties, including Brunswick, Carteret, Craven and Duplin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Mill Creek Timber Co., Inc. is a timber buyer in Cedar Point, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine, Cypress, Ash, Beech, Black/Tupelo Gum, Cottonwood, Hickory and Soft Maple. Products: Standing Timber. It covers 24 counties, including Beaufort, Bertie, Carteret and Chowan. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Neuse River Forest Products is a timber buyer in Princeton, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber. It covers 10 counties, including Duplin, Edgecombe, Franklin and Greene. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Nothing about this company could be verified outside the NC Forest Service register, which lists it as a New Bern buyer of standing timber offering timber cruises across a twelve-county block of eastern North Carolina. A research pass found no website, no Facebook page and no readable directory entry — the only near-matches were a LinkedIn profile and two business-data pages that could not be opened. Treat the register listing as the whole of the record.

RLM Logging, Inc. is a timber buyer in Goldsboro, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 13 counties, including Craven, Cumberland, Duplin and Edgecombe. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

S & M Timber Products is a timber buyer in Hobbsville, North Carolina. It has a Google Maps business listing in that category. It is also listed as a logging contractor. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Sasnett Timber Co., Inc. is a timber buyer in Kinston, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 7 counties, including Craven, Duplin, Greene and Jones. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

A timber management firm and a real estate brokerage in one: the company's own site says it buys land as well as standing timber and is 'always looking for mutually profitable transactions that benefit our customers, employees, and the larger environment.' In business since December 1986, it has been a BBB-accredited business since November 2021 and carries an A+ rating. The BBB file describes the work as procuring, merchandising and harvesting timber tracts, buying standing timber and facilitating replanting through the Sustainable Forestry Initiative. On harvesting, the company says its methods 'minimize disturbance of the land and leave it ready for a new crop of timber.'

Southern Veneer Specialty is a timber buyer in Moncure, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Ply or Veneer Logs. It covers 48 counties, including Alamance, Anson, Beaufort and Bertie. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Stewart's Forest Services, Inc. is a timber buyer in Germantown, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 99 counties, including Alamance, Alexander, Alleghany and Anson. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

The Better Business Bureau files this New Bern company not as a timber buyer but as a timber broker — an agent between individual landowners and the mills — which is a different arrangement from selling a tract outright to whoever cuts it. The BBB record puts the business start date at September 1985 and gives the company an A+ rating, though it is not BBB accredited and the file carries no customer reviews. No website, published reviews or trade coverage were found anywhere else.

Swain & Temple Inc is a logging contractor in South Mills, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Tri-State Land & Timber, LLC is a timber buyer in Pelham, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber. It covers 6 counties, including Alamance, Caswell, Durham and Orange. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Tri-State Land & Timber, LLC is a timber buyer in Harrells, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber. It covers 22 counties, including Bertie, Bladen, Brunswick and Camden. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Triangle East Timber Co Inc is a logging contractor in Mt Olive, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Wetherington Logging, Inc. is a timber buyer in Stella, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Chips. It covers 8 counties, including Carteret, Craven, Duplin and Jones. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

About 165 people work at the Plymouth lumber mill, which went 362 consecutive days without a recordable injury in 2024 by Weyerhaeuser's own account of the site. It is a softwood sawmill - an industry mill locator places it on NC Highway 149 north of town - and the NC Forest Service register shows it buying southern yellow pine as sawlogs and as standing timber across eleven eastern counties. The mill is a facility of publicly traded Weyerhaeuser Company, and the state register lists a raw materials manager rather than an owner as the buying contact, so a landowner is selling to a corporate procurement desk.

Wood Forest Resources, LLC is a timber buyer in Wilson, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: Southern Yellow Pine, Ash, Red Oak, White Oak, Hickory, Sweetgum and Yellow Poplar. Products: Standing Timber, Sawlogs and Pulpwood. It covers 69 counties, including Alamance, Anson, Beaufort and Bertie. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Woodridge Timber Inc. is a timber buyer in Jamesville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine and All Hardwoods. Products: Standing Timber. It covers 12 counties, including Beaufort, Bertie, Edgecombe and Greene. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Woodridge Timber Inc. is a timber buyer in Goldsboro, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine and All Hardwoods. Products: Standing Timber. It covers 20 counties, including Beaufort, Bertie, Craven and Duplin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.