Selling Timber in Carteret County, NC
Quick answer
There are 51 timber businesses listed for Carteret County, North Carolina: 29 consulting foresters and 22 timber buyers, loggers and mills. 2 of them have offices in the county. The rest are registered to work here and travel in, and every listing shows how far its office is from the county seat.
Each pin is a forester's office. The list below shows the same firms with the distance to the county seat.
Timber prices for Carteret County
No county publishes its own timber prices. These are North Carolina's published stumpage prices, what landowners are paid for standing timber, and the best public guide to what timber in Carteret County is bringing. Your own timber can sell above or below them.
| Pine sawtimber | $27.66 per ton |
| Pine chip-n-saw | $20.34 per ton |
| Pine pulpwood | $7.02 per ton |
| Oak sawtimber | $48.96 per ton |
| Mixed hardwood sawtimber | $28.03 per ton |
| Hardwood pulpwood | $5.15 per ton |
Source: NC State Extension, Q2 2026. All North Carolina timber prices
Not sure what your timber is worth?
Four questions and you get a ballpark range. No email needed to see it.
Before you take the first offer
A timber buyer's job is to buy your timber as cheaply as they can. A consulting forester works for you — they measure what's standing, tell you what it's worth, and run a competitive sale, usually for a percentage of the price. That makes their interests line up with yours. 23 of the 29 foresters covering Carteret County offer the full set — appraisal, cruise, and running the sale itself. How to decide whether you need one
No forester is based in Carteret County
That is normal here and not a problem. Foresters travel, and 29 of them work Carteret County from an office nearby. They are listed below, closest first. You can also click any county on the map above to see who is based there.
Consulting Foresters Working Carteret County (29)
Listed on the North Carolina Forest Service register as working Carteret County, from an office elsewhere. Closest first.
Concentration is the whole point here — nine adjoining counties around New Bern, taking in the lower Neuse, the Pamlico and the coastal plain behind them, about as tight a footprint as this directory holds. Eleven services, a working forester's list rather than a full-service consultancy, but it takes in the three that matter for a sale: appraisal, cruise, and administering the sale through to contract. Logging engineering is on there too, which speaks to tracts with access problems.
Premier Forestry & Environmental Consulting, PLLC is a consulting forestry and environmental practice based at Jacksonville, N.C., carried on the N.C. Forest Service consulting register for eight counties around the lower Neuse and the central coast — Onslow, Craven, Carteret, Pamlico, Jones, Lenoir, Beaufort and Pitt — and billing itself on its own site as an Eastern North Carolina forestry and land management firm. Its published service lines are forest management (long-term management planning, Present Use Value applications, timber sales, harvesting supervision, timber inventory, timber appraisal and boundary line maintenance); prescribed burning (fuel reduction, site prep, silvicultural and wildlife enhancement burning, with low-impact fireline installation and maintenance); herbicide application, ground-based via skidder and ATVs, covering site prep spray, mid-rotation release and food plots; GIS/GPS mapping; wildlife management; environmental services covering wetland delineation, impact permitting and BMP compliance; technical data collection; and expert witness work. Timber appraisal appears on the firm's own site although the register entry does not carry it, which answers a question the earlier description here left open. The firm operates its own herbicide skidder and bulldozer. President and senior forester Seth A. Ward earned a B.S. in Forest Resources and Conservation from the University of Florida in 2003, worked for the Florida Division of Forestry as a state lands forester at Tate's Hell State Forest and then as Putnam County Forester, joined the environmental consulting firm ESI in 2005 and opened and led its Eastern North Carolina branch office in 2006, then left in late 2009 to form Premier Forestry; in early 2011 the firm acquired Comprehensive Forestry Services, Inc., gaining five experienced employees and new service lines. Ward is N.C. Registered Forester #1611, a member of the Association of Consulting Foresters and a past chair of its N.C. chapter, a Certified Master Tree Farm Inspector, N.C. Certified Prescribed Burner #682, a N.C. and Virginia licensed pesticide applicator and a N.C. ProLogger; he sits on the Forestry Advisory Council for Wayne Community College and advises the Onslow County Career & Technical Education Program. Five staff are named in all: Ward; forestry technician Angelo Chimonas, who served in the United States Marine Corps from 2001 through 2023, finishing as a master sergeant, joined through the SkillBridge program and oversees logging and the skidder spray work; equipment operator Scott Adams, with over 25 years operating a bulldozer in forestry applications and skilled on the spray skidder; bookkeeper Brenda Garvey, who joined in January 2018; and office manager Taven Ward. (source: premierforestry.net, read 22 September 2026)
For a tract anywhere between Raleigh and the coast, this firm's whole range covers that corridor: eighteen counties running from Wake and Franklin east through Johnston, Wayne and Lenoir out to Carteret, Pender and New Hanover. Appraisal, cruising and sale administration are all on the entry, which is the combination that lets a firm value a stand, measure it, and run the sale itself. Eleven services in all — a working timber list rather than a broad environmental practice. No website is listed.
Registration 536 sits 21st oldest among the 178 registrations on the N.C. Forest Service register — a long run on the state's list. Seventeen counties, all of them east: the tidewater and lower coastal plain from Beaufort and Hyde down through Craven, Jones and Onslow, with Edgecombe and Wilson at the inland edge. Appraisal, cruise and sale administration are all listed, plus forest taxation, prescribed burning and recreation management. ACF membership, which the association restricts to full-time consultants, and SAF. No website is listed.
Twenty-one counties across the northeastern and central coastal plain, from Beaufort and Pitt out through the tidewater. The register credits appraisal, cruising and sale administration together — the full set for running a competitive sale instead of taking the first offer. Past that the list stays tight: reforestation, stand improvement, burning, herbicide, wildlife. One forester, no website listed.
Fifty-nine counties from a one-forester office in Beulaville — effectively the whole coastal plain, from the Currituck and Dare marshes south to Brunswick, plus a long reach west through the Triad into Surry and Yadkin. Eighteen services puts this firm near the top of the register for breadth, and two of them are worth noticing: wetland delineation and environmental impact statements, which matter if the tract has bottomland or a permitting question attached to it. Valuation, cruising and sale administration are all covered. No website is listed.
Coverage across twenty-seven counties of the coastal plain, from Halifax and Northampton down through the Neuse basin to Onslow and Pender, and east into Hyde, Dare and Tyrrell. The service list is short — management plans, reforestation, stand improvement, appraisal, cruising, sale administration, logging engineering, taxation and marketing — which is the working end of a timber sale rather than a full-service consultancy.
Most of the coastal plain is in range here — Northampton and Halifax in the north, down through the Neuse and Cape Fear country to Brunswick — thirty-four counties in all, well above the register's median of twenty, with Caswell, Person, Lee and Moore attached on the piedmont side. Appraisal, cruise and sale administration are all listed, along with prescribed burning, herbicide application, forest real estate and forest taxation. Registration 578 is among the older on the register, and the firm holds ACF membership, which is limited to full-time consultants.
A short service list, and a focused one: management plans, reforestation, stand improvement, the three timber-sale services, forest real estate, taxation, marketing and wildlife. Ten in all, near the narrow end of the register — this reads as timber-sale work rather than full-spectrum land consulting. What matters most is present, though: the firm can appraise a stand, cruise it and run the sale. Fifteen counties across the eastern coastal plain, from Halifax and Nash down through Pitt and Lenoir to the Pamlico and Carteret coast.
Seven services, and they are the ones that sell timber: management plans and mapping, stand improvement, appraisal, cruise, sale and contract administration, utilization and marketing, wildlife. That's a working forester's list rather than a full-service consultancy. The territory is wide for it — 30 counties taking in most of the coastal plain, from the Albemarle and Dare south through Craven and Onslow, with a reach inland to Franklin and Warren. Edenton office; no website listed on the register.
Eleven counties across the lower Neuse and the central coastal plain — Craven, Pitt, Onslow, Lenoir and their neighbors — worked by a single registered forester. The register credits the firm with timber appraisal and cruising but not sale administration, so a landowner planning a competitive sale should ask directly how that piece gets handled. Where the entry runs unusually deep is the land-management side: prescribed burning, herbicide application, wetland delineation, wildlife work and Christmas tree management sit alongside the planning and reforestation services.
The register gives Interstate Forest Products forty-five counties — the whole coastal plain from the Virginia line to South Carolina, plus a run up into Franklin, Granville and Warren — and eight services, appraisal and cruising among them but not sale administration. The firm's own site fills that gap. It describes itself as “a forestry consulting company serving Virginia and North Carolina,” trades as Interstate Forest Products LLC, and was founded in 2011 by Chuck Little after sixteen years buying timber for firms including Georgia-Pacific and Coastal Lumber; it says IFP is listed as a consulting forester in both states, with thirty years in these local timber markets. Most of the site is given over to the timber sale, run as a sealed bid: the cruise and appraisal that set a minimum bid never disclosed before the sale, a sale notice sent to buyers with the cruise attached, a sale map showing acres, access and harvest boundaries, three to four weeks for bidders to cruise it, bids read aloud on the day, and a thirty-day close in which the buyer runs the title search, prepares the timber deed and pays in full, timber rights usually running two years. Thinnings are handled differently: sold per ton, treated as a silvicultural treatment rather than a harvest, and awarded on the operator's care — the firm writes it would rather take a few cents less and be left with a good stand. Management plans are the other main line: acreage, ownership, location and objectives; stands divided by age, timber type, soil type and condition; soil maps and photographs; per-stand recommendations and a schedule by year. The site notes an up-to-date plan is required for reforestation cost share, and recommends replanting clearcuts with improved loblolly pine seedlings in late fall or winter, with site prep spray or bedding where needed and longleaf, shortleaf or hardwood alternatives where cost share helps. Another page argues there is no timber price index to watch, and that local mill conditions and logging weather matter more. The site publishes N.C. Registered Forester #1429, N.C. ProLogger certification and N.C. Forestry Association membership. As described on interstateforestproducts.com, read 23 September 2026.
If your land is in the Albemarle — Currituck, Camden, Pasquotank, Perquimans, Chowan — this is a firm working from inside it, and the coverage carries twenty-nine counties down the coastal plain through Pitt and Lenoir to Onslow and Carteret. The full sale set is on the register: appraisal, cruise, sale administration. Forest taxation and forest real estate round out an eleven-service list. No prescribed burning is listed, which is worth knowing if that's part of what you need. ACF and SAF.
Land, Farms & Timber, Inc. is based in Lake Waccamaw, North Carolina, and is listed as a forestry consultant, also doing timberland brokerage. Its register entry lists forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimate, timber sale and contract administration, prescribed burning, forest real estate, recreation management, and utilization and marketing. It states N.C. Registered Forester #586. It serves a long list of North Carolina counties, including Bladen, Columbus, Robeson, Sampson, Duplin, Cumberland, Johnston, Moore, Richmond, Scotland, Stanly, Union, Anson, Montgomery, Chatham, Lee, Harnett, Hoke, Rockingham, Alexander, Alleghany, Ashe, Avery, Burke, Caldwell, Watauga, Wilkes, Beaufort, Carteret, Craven, Dare, Hyde, Jones, Lenoir, New Hanover, Onslow, Pamlico, Pender, Pitt, Tyrrell, and Washington. This fits a landowner in eastern or western North Carolina who wants someone offering both forestry consulting work, such as a timber cruise or a management plan, and help selling forest real estate, under one listing. From advancelandandtimber.com, read 10 October 2026.
Seven registered foresters — as many as any firm on the state register — and sixty counties covered, which together make this one of the largest consulting operations working in North Carolina. The reach runs from the foothills in Burke and McDowell across the piedmont and the sandhills to the coast at Brunswick, Onslow and Carteret. The full sale package is here: appraisal, cruise, and running the sale through to contract. Nineteen services in all, including prescribed burning, wetland delineation, environmental impact statements and forest taxation — which matter when a timber sale is one piece of a larger land or estate question. The company's own website is a national corporate one rather than a local office page, and it describes a firm of that scale: a corporate office in Charlotte, offices across the Northeast, Southeast, Lake States, Pacific Northwest and Gulf regions, and almost sixty years spent helping landowners manage, sell, buy, improve and enjoy millions of acres — AFM dates itself to 1966, when Bartow S. Shaw, Jr. formed the predecessor firm Bartow Shaw and Associates. It states a size threshold for the land management work in its own words: property of fifteen acres or more. The published service lines run well past timber alone — timber sales and timber management, reforestation and silviculture, forest inventory to establish volumes and values, wildlife services and habitat restoration, environmental services, forest carbon, land surveying, wood flow for navigating fibre supply agreements, farmland management through AFM Ag Services, and forestry and property accounting handled by a dedicated team of about twenty including CPAs on staff, covering property tax administration, audit support and hunt lease administration. Forest certification is offered too: the firm says management operations are conducted under FSC, SFI and ATFS guidelines. As described on americanforestmanagement.com, read 22 September 2026.
Every service the state's A–U schedule covers is on this record — all twenty, more than 98 percent of firms on the register. So the timber-sale core of appraisal, cruise and sale administration sits alongside surveying, wetland delineation, prescribed burning, Christmas tree management and urban forestry. A landowner with a boundary question or a wet corner can get both answered on the same visit as the cruise. Coverage spans forty counties, from the north-central piedmont down through the sandhills and out to the southeastern coast. Memberships in the Society of American Foresters and the International Society of Arboriculture are recorded; no website is.
Every county in North Carolina is listed against this firm — all 100 — which puts it in the small group on the register that will work anywhere in the state. The service list is narrow by comparison: ten entries, built tight around the sale itself, with appraisal, cruising and sale and contract administration at the middle and forest taxation, utilization and marketing, urban forestry and stewardship plans around them. Both ACF and SAF memberships are recorded. One registered forester covers that ground, which is worth knowing when you're arranging a visit.
Effectively the eastern two-thirds of the state: sixty-eight counties covering every county on the coastal plain and most of the piedmont, which puts this among the widest-reaching listings on the register. Two registered foresters, the older registration numbered 914. The sale trio is present — appraisal, cruise, contract administration. Surveying is on the service list as well, alongside forest real estate and urban forestry, so a boundary or title question does not need a second firm. On its own site the business trades as Carolina Forestry & Realty, a privately owned professional corporation held by co-owners Keith Brouillard and Rodney Finkbiner and recognised by the N.C. Board of Registration for Foresters as a Professional Forestry Company, working in North Carolina and Virginia and claiming more than 30 years of it. Timber is sold for the landowner on a lump-sum sealed-bid basis, the site saying a sale can draw five to ten bids, after an appraisal done by cruising on larger even stands or by tree count on small or irregular ones. Beyond the sale it lists timberland investment analysis, comprehensive management plans with growth-and-yield and economic projections, pulpwood and residential or development thinnings, disease and pest management, property tax reduction, damage and trespass appraisals and boundary line maintenance. The forestry side sits next to a working rural land brokerage: both owners are licensed brokers and Realtors and the firm publishes its own listings, so a landowner deciding between selling timber and selling the tract can put both questions to the same office. As described on carolinaforestry.com, read 22 September 2026.
Seven registered foresters is the top of the range on the state register, and it comes attached to eighty-four counties — mountains to the Outer Banks, with very little of North Carolina out of reach. Scale like that means a landowner isn't waiting on one person's calendar, and it means the firm doesn't vanish when someone retires. Nineteen services: wetland delineation, environmental impact statements, forest taxation and urban forestry, alongside the appraisal, cruise and sale-administration combination a competitive timber sale actually runs on. ACF and SAF. The firm trades as GFR Forestry Consultants and dates itself to 1964, and it works from four North Carolina offices — Raleigh, Lillington, Tarboro and Lake Waccamaw — with its published service area running beyond the state line into South Carolina, Virginia, Maryland and the Eastern Shore. Its own account of a timber sale runs from stand assessment through a sale announcement and marketing plan to bid management, handled by foresters it says keep current on local buyers, pricing and competition; on the management side it names timber inventory and valuation, timber trespass analysis, forest management planning, GIS mapping, boundary line location and maintenance, pulpwood thinning, pest and disease control, fire protection measures and hunt and lease management. Two services sit outside the usual consulting list: timber basis determination and tax planning for estates and long-held family land, and wood flow and logistics work for landowners or businesses moving product to buyers. It also runs a rural real estate side, brokering timberland, hunting and agricultural tracts through licensed N.C. brokers. As described on gfrforestry.com, read 22 September 2026.
Forty-six counties, close to half the state, and nearly all of it east of the piedmont: the Roanoke and Tar drainages, the full northeastern coastal plain, south through Craven and Onslow, out to Dare, Hyde and Tyrrell, with a western reach into Guilford, Alamance and Durham. Very few firms on the register cover that much ground with a single registered forester. Fifteen services, from appraisal, cruise and sale administration through prescribed burning, herbicide work, recreation and urban forestry. No website is listed.
All 100 counties, which only a handful of firms on the state register can claim — wherever the tract sits in North Carolina, this one covers it. Two registered foresters, and the older of the two registrations is number 482, sixteenth-oldest of the 178 on the register. Appraisal, cruise and sale administration are all here, so a landowner can value the stand, measure it and run the sale through to contract in one place. Seventeen services in all, out as far as Christmas tree management, urban forestry and forest taxation. The firm holds Association of Consulting Foresters membership, which is limited to full-time consultants. The firm calls itself family owned and says it has run a consulting forestry business for over 40 years; William H. Lock has retired from full-time forestry work and his son Jonathan C. Barnes, who passed the state forestry exam in 2002, now runs the company as president. Alongside state registration in both North Carolina and Virginia it claims Certified Forester and Certified Arborist credentials, Tree Farm Inspector status and Technical Service Provider approval for NRCS cost-share programs, and it offers work turn-key — timber inventory, marketing, harvest inspection and reforestation through one office — plus timber tax basis estimates, timber trespass reports, growth models for income projections and landowner seminars and field tours. Real estate is the one thing it has pulled back from: the site says that side is now limited to advice and referrals rather than listing and selling land. Its public timber sale notices, bids taken sealed at the office, run from 2010 through 2021 and cover tracts from a few acres up to about 280, clustered in Rockingham, Guilford, Alamance and Caswell counties and over the line into Henry and Pittsylvania counties, Virginia. A first consultation is offered free. As described on whlock.com, read 22 September 2026.
Work concentrated in eastern North Carolina — the inner coastal plain around Greenville, Goldsboro and Kinston, out to Carteret and Pamlico on the sound — sixteen counties in all, run from an office over the line in Dorchester, South Carolina. The register credits the firm with appraisal, cruising and sale administration, the set a competitive timber sale needs, along with reforestation, herbicide application and stewardship planning. It belongs to the Society of American Foresters.
Milliken Advisors Inc. is a forestry consulting and timberland brokerage business in Columbia, North Carolina. It works with landowners on the kind of jobs that come with owning timberland, from planning a sale to planting trees back after a harvest. The work on offer covers forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, insect, disease and fire protection, prescribed burning, forest real estate, recreation management, forest taxation, utilization and marketing, herbicide application, and stewardship plans. The forester holds N.C. Registered Forester credential #1394. Milliken Advisors serves landowners across a long list of North Carolina counties, among them Wake, Mecklenburg, Guilford, Buncombe, and Dare. The business has been working with landowners since 1949. Its own description of how a job runs is plain: "Once we know what you want, we take a good look at your land: its current state, what's happening in the market, and what the future could hold. Then we build a strategy that actually fits your needs." On follow-through, it says "You don't have to worry about juggling contractors or chasing down deadlines." This fits a landowner who wants one firm to handle a timber sale or a management plan from start to finish, rather than piecing the work together themselves. From millikenadvisors.com, read 10 October 2026.
All one hundred counties — one of the few listings on the register that covers the entire state. The registration here is number 8, the second-oldest of the 178 registrations on the register, which is about as long a tenure as North Carolina forestry has to offer. Beyond the sale work of appraisal, cruise and contract administration, this firm surveys, so a boundary question and a timber cruise can be settled on the same visit. Christmas tree management, wetland delineation and environmental impact statements are also listed.
Statewide coverage — all 100 North Carolina counties — from an office in Gainesville, Georgia. Fifteen services are recorded, including the three that make a timber sale work: appraisal, cruising, and sale and contract administration. Prescribed burning, herbicide application, urban forestry and stewardship plans fill out the rest. The register carries this entry under the name US Forest Service, with one N.C. Registered Forester and no website given.
Worth reading the service list closely here. The register credits this entry with timber cruising and sale administration but not timber appraisal — so the valuation step most landowners want before going to market isn't among the listed services. What is listed is broad: 48 counties across the northeastern piedmont and most of the coastal plain, plus reforestation, forest real estate, wildlife management and stewardship plans. The office address is Atlanta, Georgia. No website is on file.
Hunt Forest Resources, LLC is a timber buyer based in Moncure, North Carolina, with forestry consulting, firewood, and wood recycling run alongside it. They buy stumpage, sawlogs, pulpwood, and chip-n-saw timber in pine and hardwood, and they also handle forest management plans and mapping, timber cruise and volume estimates, timber appraisal, timber sale and contract administration, reforestation, timber stand improvement, prescribed burning, herbicide application, insect and fire protection, and wildlife and recreation management. Their registered forester holds N.C. Registered Forester #1438, and the company carries ProLogger and American Tree Farm System (ATFS) standing. They work across a long list of North Carolina counties, from Alamance, Durham, and Wake, through Chatham and Moore, down to Brunswick and New Hanover, and out east to Dare, Hyde, and Beaufort, along with many others. On their own pages they describe offering "a diverse range of services that span the entire lifecycle of forest products, from land and timber management to sustainable harvesting, real estate services, wood products manufacturing and beyond," and say they manage "7,000 acres of timberland annually" across four facilities in the state. This suits a landowner who wants one outfit that can buy the timber, write the management plan, and keep an eye on the ground afterward, rather than stitching together a buyer, a consultant, and a logger separately. From huntforestry.com, read 10 October 2026.
Corbett Timber Company is a timber buyer, logger, and forestry consultant based in Wilmington, North Carolina. They buy "every standing timber type", as well as soft hardwood logs for mills and other manufacturing use, and they work with Long leaf pine and Loblolly pine among other species. Their harvest work covers clear cut, row thinning, select thinning, residential thinning, seed tree, shelter wood, swamp logging, whole tree chipping, brush reduction, and fuel chipping. Past jobs include thinning on Long leaf pine and Loblolly pine plantations, and a residential thinning where a chipper was used to clear underbrush. Beyond the harvest itself, they offer timber appraisals, GIS mapping, marketing and merchandising advice, reforestation, and management plans, along with procurement services. Their staff includes Registered Foresters and Certified Tree Farm Inspectors. The business traces its timber brokerage work back to the mid-1980s, building on generations of logging before that. They serve New Hanover County. A minimum of 10 acres applies, stated on their contact page as "Property Location & Size (Minimum 10 acres required)". This fits a landowner with a mixed pine or hardwood tract who wants one company to handle the cut, the paperwork around it, and the replanting after, rather than hiring separate people for each step. From thecorbettcompanies.com, read 10 October 2026.
In business since 1958 — both the Better Business Bureau and Manta independently record that start date — Rankin Timber is a small shop, two to four employees, that pairs buying with consulting forestry. Its Manta listing describes the firm as buyers of standing timber, timber brokers and North Carolina Registered Foresters, offering forest management plans, forest management and wildlife management. For a landowner, that means the harvest can be planned and represented rather than simply bid on, which is unusual for an operation this size. Nearly seventy years in business gives it a longer track record than most buyers working the New Bern area.
Timber Buyers, Loggers & Mills in Carteret County (2)
These 2 are based in Carteret County. Being close matters: hauling is one of the biggest costs taken out of your check.
Coastal Wood & Sawing is a mill in Newport, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.
Wetherington Logging, Inc. is a timber buyer in Stella, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Chips. It covers 8 counties, including Carteret, Craven, Duplin and Jones. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Timber Buyers, Loggers & Mills Nearby (20)
Businesses that buy, cut or mill timber in Carteret County, working from a nearby town.
Registered with the Better Business Bureau as Bay River Logger, LLC — singular — with a business start date of March 2005, twenty-one years working the counties around New Bern. The BBB file matches this listing's street address on Sand Hill Rd and its phone number exactly, which is the only independent confirmation the business exists; the BBB record itself is unrated and carries no reviews. No website, Facebook page or trade coverage was found.
Buck Timber Co is a mill in Grantsboro, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.
The New Bern office is one branch of a timber merchant that says it was established in 1937, is headquartered in Conway, South Carolina, and runs more than three dozen field offices across seven southeastern states with over 100 timber buyers on staff. Canal Wood buys and markets veneer logs, sawtimber, chip-n-saw, pulpwood and fuel chips, and it is certified by the Forest Stewardship Council. Alongside buying, the company does management planning, thinning and harvesting, and a subsidiary, Canal Land & Timber, LLC, handles land sales. The Better Business Bureau records five other Canal Wood locations in North Carolina — Wallace, Nashville, Roanoke Rapids and Fairfield among them — and gives this office a street address at 810 Washington Post Rd.
Duplin Forest Products, Inc is a timber buyer in Wallace, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 12 counties, including Beaufort, Carteret, Craven and Duplin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Almost nothing about this company is verifiable from public sources. It appears in this directory's source data as an independent logging contractor working across twelve eastern North Carolina counties, but it does not appear on the NC Forest Service timber-buyer tables for Washington or Beaufort counties, has no Carolina Loggers Association directory entry, no federal motor-carrier registration, and no website, Facebook page, BBB file or published review that could be found.
East Coast Timberland Inc. is a timber buyer in Nashville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Chips. It covers 40 counties, including Beaufort, Bertie, Carteret and Chatham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Josey Lumber Co. Inc. is a timber buyer in Scotland Neck, North Carolina. It has a Google Maps business listing in that category. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Lassiter Forest Products, Inc. is a timber buyer in Princeton, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 21 counties, including Beaufort, Bertie, Bladen and Carteret. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Michael L. Goodson Logging, Inc. is a timber buyer in Jacksonville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 14 counties, including Brunswick, Carteret, Craven and Duplin. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Mill Creek Timber Co., Inc. is a timber buyer in Cedar Point, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine, Cypress, Ash, Beech, Black/Tupelo Gum, Cottonwood, Hickory and Soft Maple. Products: Standing Timber. It covers 24 counties, including Beaufort, Bertie, Carteret and Chowan. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
N.C. Forest Products, Inc. is a timber business in Greenville, North Carolina. It is listed under timber buyers. Its products are standing timber, sawlogs, pulpwood and fuel chips, and it covers all hardwoods and all softwoods. The counties it serves are Beaufort, Bertie, Carteret, Craven, Edgecombe, Greene, Lenoir, Pitt and Washington. Standing timber and sawlogs are the first products it names, and pulpwood and fuel chips come after them. A landowner with a tract in one of those counties can check whether those products and species fit what is growing on the land. It suits a landowner in one of those nine counties who has hardwood or softwood stands and wants to talk with a buyer about standing timber, sawlogs, pulpwood or fuel chips. From gandgforestproducts.com, read 10 October 2026.
Nothing about this company could be verified outside the NC Forest Service register, which lists it as a New Bern buyer of standing timber offering timber cruises across a twelve-county block of eastern North Carolina. A research pass found no website, no Facebook page and no readable directory entry — the only near-matches were a LinkedIn profile and two business-data pages that could not be opened. Treat the register listing as the whole of the record.
A timber management firm and a real estate brokerage in one: the company's own site says it buys land as well as standing timber and is 'always looking for mutually profitable transactions that benefit our customers, employees, and the larger environment.' In business since December 1986, it has been a BBB-accredited business since November 2021 and carries an A+ rating. The BBB file describes the work as procuring, merchandising and harvesting timber tracts, buying standing timber and facilitating replanting through the Sustainable Forestry Initiative. On harvesting, the company says its methods 'minimize disturbance of the land and leave it ready for a new crop of timber.'
Stewart's Forest Services, Inc. is a timber buyer in Germantown, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 99 counties, including Alamance, Alexander, Alleghany and Anson. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
The Better Business Bureau files this New Bern company not as a timber buyer but as a timber broker — an agent between individual landowners and the mills — which is a different arrangement from selling a tract outright to whoever cuts it. The BBB record puts the business start date at September 1985 and gives the company an A+ rating, though it is not BBB accredited and the file carries no customer reviews. No website, published reviews or trade coverage were found anywhere else.
Tri State Land & Timber LLC is a logging contractor in Jacksonville, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.
Triangle East Timber Co Inc is a logging contractor in Mt Olive, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.
Weyerhaeuser - Ayden Lumber is a timber buyer in Ayden, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Sawlogs and Standing Timber. It covers 25 counties, including Beaufort, Bertie, Carteret and Chowan. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
About 165 people work at the Plymouth lumber mill, which went 362 consecutive days without a recordable injury in 2024 by Weyerhaeuser's own account of the site. It is a softwood sawmill - an industry mill locator places it on NC Highway 149 north of town - and the NC Forest Service register shows it buying southern yellow pine as sawlogs and as standing timber across eleven eastern counties. The mill is a facility of publicly traded Weyerhaeuser Company, and the state register lists a raw materials manager rather than an owner as the buying contact, so a landowner is selling to a corporate procurement desk.
Wood Forest Resources, LLC is a timber buyer in Wilson, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: Southern Yellow Pine, Ash, Red Oak, White Oak, Hickory, Sweetgum and Yellow Poplar. Products: Standing Timber, Sawlogs and Pulpwood. It covers 69 counties, including Alamance, Anson, Beaufort and Bertie. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Questions landowners ask
How many timber buyers and foresters serve Carteret County?
51 businesses are listed for Carteret County: 29 consulting foresters and 22 buyers, loggers and mills. 2 of them have offices in the county.
How much is my timber worth in Carteret County?
Nobody can tell you what your timber is worth without walking it. Value depends on the species, the size and grade of the trees, how thickly they stand, the ground conditions and how easily a logger can reach them. North Carolina State Extension publishes quarterly average stumpage prices by region, which tells you what the market is doing, not what your tract holds. Anyone who quotes you a figure without seeing the land is guessing, and a guess in that direction is rarely in your favour.
What stumpage value means →Do I need a forestry consultant to sell timber in Carteret County?
You do not have to use one. A consulting forester works for you rather than the buyer, marks the timber, runs a sealed-bid sale and typically charges a percentage of the sale. Research from several state extension services has found that timber sold through a consultant often returns enough more to cover the fee, though results vary by tract and by market. The decision usually turns on the size of the sale and whether you have sold timber before.
Do I need a forestry consultant? →Do I need a permit to cut timber in North Carolina?
There is no statewide permit to harvest timber on your own land in North Carolina, but several rules still apply: the Forest Practices Guidelines for water quality, local county and municipal ordinances that can regulate harvesting, and sedimentation rules where a stream is involved. Requirements vary by county, so check with the county before work starts.
Permits and rules in North Carolina →What is timber worth in Carteret County?
No price series is published for Carteret County on its own. North Carolina's latest published stumpage figures (NC State Extension, Q2 2026) put oak sawtimber at $48.96 per ton. What your own timber brings depends on the species, the size and amount of it, and how far it is from a mill. A timber cruise by a forester settles it.
Forester listings for Carteret County come from the North Carolina Forest Service register, revised 06-Apr-26. The register is updated quarterly.