Selling Timber in Caswell County, NC
Quick answer
There are 93 timber businesses listed for Caswell County, North Carolina: 49 consulting foresters and 44 timber buyers, loggers and mills. 1 of them has an office in the county. The rest are registered to work here and travel in, and every listing shows how far its office is from the county seat.
Each pin is a forester's office. The list below shows the same firms with the distance to the county seat.
Timber prices for Caswell County
No county publishes its own timber prices. These are North Carolina's published stumpage prices, what landowners are paid for standing timber, and the best public guide to what timber in Caswell County is bringing. Your own timber can sell above or below them.
| Pine sawtimber | $27.66 per ton |
| Pine chip-n-saw | $20.34 per ton |
| Pine pulpwood | $7.02 per ton |
| Oak sawtimber | $48.96 per ton |
| Mixed hardwood sawtimber | $28.03 per ton |
| Hardwood pulpwood | $5.15 per ton |
Source: NC State Extension, Q2 2026. All North Carolina timber prices
Not sure what your timber is worth?
Four questions and you get a ballpark range. No email needed to see it.
Before you take the first offer
A timber buyer's job is to buy your timber as cheaply as they can. A consulting forester works for you — they measure what's standing, tell you what it's worth, and run a competitive sale, usually for a percentage of the price. That makes their interests line up with yours. 45 of the 49 foresters covering Caswell County offer the full set — appraisal, cruise, and running the sale itself. How to decide whether you need one
No forester is based in Caswell County
That is normal here and not a problem. Foresters travel, and 49 of them work Caswell County from an office nearby. They are listed below, closest first. You can also click any county on the map above to see who is based there.
Consulting Foresters Working Caswell County (49)
Listed on the North Carolina Forest Service register as working Caswell County, from an office elsewhere. Closest first.
A small territory, and a specific one: ten counties along the northern piedmont and the Virginia line — Caswell, Person, Granville and the northern edge of the Triangle. Twelve services, with an unusual pair among them, logging engineering and environmental impact statements, a combination that comes up when a tract has road, stream or permitting complications. Appraisal, cruising and sale administration are all on the register. No website is listed.
Membership in the Association of Consulting Foresters is the thing to notice here. ACF takes full-time consultants only, so this is the firm's actual business rather than something done around other work. Thirty-three counties, running from Guilford and Rockingham in the northern piedmont across the Triangle and down through the sandhills into Scotland, Robeson and Pender. Sixteen services, including prescribed burning, forest taxation and urban forestry, and the appraisal, cruise and sale administration set a competitive sale depends on.
All 100 counties, which only a handful of firms on the state register can claim — wherever the tract sits in North Carolina, this one covers it. Two registered foresters, and the older of the two registrations is number 482, sixteenth-oldest of the 178 on the register. Appraisal, cruise and sale administration are all here, so a landowner can value the stand, measure it and run the sale through to contract in one place. Seventeen services in all, out as far as Christmas tree management, urban forestry and forest taxation. The firm holds Association of Consulting Foresters membership, which is limited to full-time consultants. The firm calls itself family owned and says it has run a consulting forestry business for over 40 years; William H. Lock has retired from full-time forestry work and his son Jonathan C. Barnes, who passed the state forestry exam in 2002, now runs the company as president. Alongside state registration in both North Carolina and Virginia it claims Certified Forester and Certified Arborist credentials, Tree Farm Inspector status and Technical Service Provider approval for NRCS cost-share programs, and it offers work turn-key — timber inventory, marketing, harvest inspection and reforestation through one office — plus timber tax basis estimates, timber trespass reports, growth models for income projections and landowner seminars and field tours. Real estate is the one thing it has pulled back from: the site says that side is now limited to advice and referrals rather than listing and selling land. Its public timber sale notices, bids taken sealed at the office, run from 2010 through 2021 and cover tracts from a few acres up to about 280, clustered in Rockingham, Guilford, Alamance and Caswell counties and over the line into Henry and Pittsylvania counties, Virginia. A first consultation is offered free. As described on whlock.com, read 22 September 2026.
A piedmont practice with a long reach east — thirty-one counties from Surry and Stokes on the Virginia line, across the Triad and the Triangle, then out through Johnston and Wayne to Wilson, with Robeson and Cumberland picked up to the south. Logging engineering sits on the service list next to the appraisal, cruise and sale administration a sale runs on, which is the difference between marking a stand and working out how to get equipment onto it. Fourteen services in total. The register lists no association membership and no website.
The N.C. Forest Service register lists Grateful Trees and Bees across twelve counties — the Triangle and the ring of counties north and west of it — with sixteen services, appraisal, cruising and timber sale administration among them. The firm's own site describes a more urban practice than that list suggests. GTB calls itself “a different kind of tree company”: a family-operated business co-owned by Jacob Pressley and Jennifer Socey, proud, it says, to call Durham home since its opening in 2013, and serving “clients in Durham, Chapel Hill, Carrboro, Hillsborough and their environs.” It sorts the work into three groups. Urban forestry covers custom climbing and pruning, removals and stump grinding, plantings, health assessments, decay mapping and pruning clinics. Traditional forestry covers stewardship plans, timber sales and harvest compliance, the Present-Use Tax program, regeneration plans, forest inventories and valuations, tree protection plans and watershed protection plans. A third group it calls “the spaces between” holds appraisals and valuations, pre-construction consults, tree protection compliance, species identification tours, firewood delivery and beekeeping referrals. The site states that arboriculture work is performed or overseen by ISA Certified Arborist #SO-5685A, and that “forestry consulting, stewardship plans, and timber sales are provided by North Carolina Registered Forester #1753” — the registration the register already carries. The firm says it has “made the conscious decision to resist the false narrative that says bigger is always better,” runs a single crew, and offers quotes on a published sliding scale; it describes its prescriptions as suiting land “whether that’s one acre, or 100 acres.” Grateful Trees & Bees is a division of 43560 Enterprises, LLC. It closes for breaks in the autumn, winter and spring and for an extended summer hiatus. As described on gratefultreesandbees.com, read 23 September 2026.
Tight to the northern piedmont: Granville, Person, Vance, Caswell, Orange, Durham, Alamance and Wake. Eight counties is among the smallest footprints in this directory, and what it buys is local ground knowledge rather than reach. Registration number 538 is one of the older ones on the state register. Prescribed burning and urban forestry sit alongside the appraisal, cruise and sale administration a landowner needs, and the firm carries Society of American Foresters membership.
Daniel W. Edwards, Consulting Forester P.A. is a forestry consulting and timberland brokerage based in Asheboro, North Carolina. Dan Edwards works with landowners on timber and land matters across North Carolina, South Carolina and Virginia, with named service counties in North Carolina that include Randolph, Davidson, Forsyth, Guilford, Wake, Chatham, Orange, Durham, Johnston, Moore, Richmond, Robeson, Rowan and others. The work covers forest management plans and mapping, timber appraisal, timber cruise and volume estimate, timber sale and contract administration, insect, disease and fire protection, forest real estate, forest taxation, and utilization and marketing. Species worked with include loblolly pine, longleaf pine, yellow poplar, white oak, hickory, maple and gum. On a timber sale, the approach covers "timber valuation, buyer selection, sale preparation, contract terms, boundary considerations, harvest oversight, and post-harvest recommendations." For land purchases, Dan will "evaluate potential land purchases with regard to timber value, soils, local market values, and potential problems." No stated minimum acreage was found. The smallest job shown is +/- 23 Acres in Davie County, listed for sale. Dan Edwards holds N.C. Registered Forester #612 and is a licensed real estate broker in North Carolina. The business states over 40 years of experience. This fits a landowner in North Carolina, South Carolina or Virginia who wants one person to handle both the timber side and a possible land sale, rather than juggling a forester and a broker separately. From dedwardsforester.com, read 10 October 2026.
Tugwell Consulting Forestry, P.A. is a consulting forestry firm based in Asheboro, North Carolina. They work with landowners, private industry, and government agencies, handling timber inventory and appraisals, timber sales, forest management plans, timber harvest recommendations, thinnings, and reforestation. They also offer real estate services for timberland. Their work covers the full range a landowner might need: forest management plans and mapping, timber cruising and volume estimates, timber sale and contract administration, logging engineering, timber stand improvement, prescribed burning, wetland delineation, and wildlife management, among other services. The firm holds N.C. Registered Forester credential #775, and says it is "home of the 2016-2018 President of the Association of Consulting Foresters of America, Inc." They describe over 35 years of forestry experience. They are based in the center of North Carolina and serve landowners across a long list of counties, including Randolph, Guilford, Davidson, Chatham, Moore, Wake, Montgomery, and Richmond, among many others, and say they also travel into surrounding states to reach clients. Tugwell describes itself as "a privately owned business located in Asheboro, NC specializing in property management and timber investments," working with owners who want to raise property value, grow timber value, build a sustainable asset, or improve wildlife habitat. This fits a landowner anywhere in central North Carolina who wants one firm to handle the whole process, from walking the tract and writing the management plan through to running the timber sale itself, rather than hiring separate people for each step. From tugwellforestry.com, read 10 October 2026.
The office is in Charlottesville, Virginia, a good way over the state line, but the North Carolina coverage is nothing marginal: 64 counties, wider than 93 percent of firms on the register. That takes in the whole piedmont and coastal plain east of the mountains, from Currituck and Brunswick inland to Surry and Rockingham. Two registered foresters, fifteen services — wetland delineation and environmental impact work sitting alongside the appraisal, cruise and sale-administration set — and ACF membership. The company website is a corporate one and says nothing about any particular North Carolina office or county: it states only that F&W's foresters are located throughout the United States, South America and Europe, and points visitors to a find-your-local-forester map. What it does set out is the firm behind the local contact. F&W says it was founded in 1962 by Eley Frazer and Frank Wetherbee, is headquartered in Albany, Georgia, and manages millions of acres of forestland worldwide; its published timeline runs from regional inventories and forestland appraisals in the 1970s, through growth from 25 employees in two states to 100 in eight states during the 1990s, to expansion into Uruguay and Brazil and the Tree Farm Group certification in the 2000s and the acquisition of Fountains US and UK in 2016. Eight service lines are published — timber sales, property management, field support services for TIMOs and REITs, forest inventory and mapping, forestland accounting, technical and analytical work, real estate, and natural capital. On timber sales specifically the firm describes pre-harvest valuation reporting on species, age and condition, sale layout and marketing to match timber to the best market, then on-site harvest supervision: harvest inspections and reporting, streamside management zone delineation, BMP compliance audits, timber marking, boundary re-marking and road maintenance oversight, with Phase I Environmental Site Assessment available during property transactions. As described on fwforestry.com, read 22 September 2026.
R.B. Klass Forestry Services, based in Cary, North Carolina, is listed as a forestry consultant and also as a timberland broker. The work on offer covers forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, logging engineering, forest real estate, forest taxation, and utilization and marketing. Its own pages describe building land management plans, "usually covering 10 years or more," based on an analysis of timber stands and what the landowner wants. It works in pine and hardwood, and also pine straw. Thinning work ranges from pre-commercial thinning in young pine stands to commercial pulpwood thinning, crop tree release, and commercial improvement cuts in hardwood and mixed stands, with trees marked by hand depending on the age, size, and stocking of each stand. Reforestation work includes site preparation, seedling selection, and cost share paperwork, and it says it searches out "the best genetically improved seedlings on a tract-by-tract objective basis." It also offers Tree Farm certification, prescribed burning, wildlife habitat work, and hunting lease negotiation. It serves Bertie, Camden, Chowan, Currituck, Edgecombe, Franklin, Gates, Greene, Halifax, Hertford, Martin, Nash, Northampton, Pasquotank, Perquimans, Pitt, Warren, Wayne, and Wilson counties. It holds an N.C. Registered Forester credential (provisional), #472, and has been "helping landowners reach their goals since 1983." The smallest job shown on its pages is the Linden Tract on the Lower Little River, a roughly 306 acre property, which gives a sense of the scale it has handled. This suits a landowner with a larger timber tract who wants a full management plan built around it, not just a quick one-off sale. From ncforester.com, read 10 October 2026.
Rudd Forestry, PLLC works out of Raleigh, and the directory records coverage of forty-six counties reaching from the Rockingham and Forsyth line east through the Triangle out to Pitt, Onslow and Pender. The firm says its aim is to help landowners achieve their goals for their forestland, and that it works in North Carolina and Virginia. Its services page describes tailored management plans for forest health and long-term sustainability, timber appraisal covering volume, value and forest health, planning and management of timber sales and harvests, site-specific reforestation, boundary line marking, property security against trespassing, theft and poaching, GIS mapping, hunt lease management, wildlife habitat improvement, forest conservation, outdoor recreation planning, and help buying and selling North Carolina farms and timberland. Owner Thomas Rudd holds a forest management degree from North Carolina State University and states sixteen years as a consulting forester and fourteen as a licensed North Carolina real estate agent, together with arborist certification, a drone certification and standing as a certified tree farm inspector. As described on ruddforestry.com, read 22 September 2026.
Sixteen services is a wide list by the register's standards, and this one stretches from prescribed burning and herbicide application to wetland delineation, logging engineering and forest taxation. Appraisal, cruising and sale administration are all included, so a whole sale can be run in one place. Coverage is sixteen counties centred on Randolph and Guilford in the central piedmont and reaching south through Moore and Scotland into the Sandhills, with ACF and SAF membership recorded and registration 1702 held by Philip M. Mead. The firm's own site fills in the history the register does not carry. Henderson Forestry Consultants says it was founded in 1984 by David C. Henderson, and that in 2021, when Henderson retired, his son-in-law Philip M. Mead took on ownership and operations; the business remains privately owned, is headquartered in Asheboro, and says it serves clients across North Carolina, South Carolina and Virginia. Its published service list runs to forest management plans, timber sales, real estate services, timber inventory and appraisals, GIS and mapping, reforestation, site preparation, timber stand improvement, forestry programmes and certifications, timber tax planning, and property protection, under which prescribed fire, boundary maintenance and fire-line installation sit as answers to trespass, timber theft and wildfire. The firm sets out what one of its management plans contains: landowner goals, stand-by-stand mapping of timber type, age and acreage with hydrology, soils and satellite imagery, current stand conditions, future management areas, a schedule of silvicultural operations, environmental measures, monitoring metrics and cost-share recommendations, and it says its plans satisfy the requirements of the Present-Use Value tax deferral programme. On sales it describes a free initial inspection, an inventory and appraisal setting a minimum acceptable market value, field work and boundary marking, contractor supervision by unannounced inspection, and marketing to vetted timber procurement organisations, drawing on a year-round regional price database. As described on hfcforestry.com, read 23 September 2026.
Fifty-eight counties is a big footprint — wider than nine out of ten firms on the register — and it stretches from the mountain counties around Watauga and Avery clear across the piedmont into the inner coastal plain at Wayne, Greene and Edgecombe. Two registered foresters, so the work does not stall if one is booked. Appraisal, cruising and sale administration are all listed, and unusually the firm pairs woodland work with urban forestry and an arboriculture credential, which matters if the tract sits on the edge of a growing town.
Timber Marketing and Management of the Carolinas, Inc. is the forestry side of a Raleigh practice whose site now carries the TMM Real Estate LLC name, and its forester, Edwin E. Orr, holds N.C. Registered Forester number 477 - the fifteenth-oldest of the 178 registrations on the state register. The service area is broad to match: thirty-nine North Carolina counties running from Caswell and Stokes on the Virginia line, through the Triangle and the sandhills, down to Brunswick and the coast. The company's own account says the business has roots in land sales going back to the early 1980s, when Timber Marketing & Management of the Carolinas Inc. was selling rural farms and timberland properties, and that sales today take in a wider range of property, including transitional, residential development, recreational land and timberland. Its timber sales page says the sale of timber is the most critical time for a landowner to get professional advice, and describes the firm helping an owner decide which trees to sell and when, making intensive inventories, setting sale conditions to protect the property, checking the sale against government regulations, advertising and marketing it, accepting bids or negotiating offers, overseeing preparation of the timber deed, closing, and inspecting the harvesting operation; logging inspections are carried out on every sale it handles. The inventory and appraisals page says cruises are run by plot sampling, strip sampling, point sample or 100 percent marking, from light-intensity sample cruises up to estimates in which every tree is measured and marked. Timberland management plans are built on inventory and growth data, carry timelines and income and expense projections, and draw on experience in natural pine, plantation pine and hardwood, implemented through the firm's own employees and independent contractors. Growth studies and yield projections, reforestation, annual property inspection for absentee owners, boundary line maintenance and mapping complete the list. As described on tmmoc.com, read 23 September 2026.
Registration number five — the oldest registration in the N.C. Forest Service register, first of all 178. Fourteen counties, clustered along the Virginia line and the northeastern coastal plain: Vance, Warren, Granville and Person on the west side, Halifax, Northampton, Hertford and Bertie on the east. The full sale set is here — appraisal, cruise, sale administration — and so is surveying, which means a boundary question and a timber cruise can be handled in one engagement instead of two. An ACF member firm.
Effectively the eastern two-thirds of the state: sixty-eight counties covering every county on the coastal plain and most of the piedmont, which puts this among the widest-reaching listings on the register. Two registered foresters, the older registration numbered 914. The sale trio is present — appraisal, cruise, contract administration. Surveying is on the service list as well, alongside forest real estate and urban forestry, so a boundary or title question does not need a second firm. On its own site the business trades as Carolina Forestry & Realty, a privately owned professional corporation held by co-owners Keith Brouillard and Rodney Finkbiner and recognised by the N.C. Board of Registration for Foresters as a Professional Forestry Company, working in North Carolina and Virginia and claiming more than 30 years of it. Timber is sold for the landowner on a lump-sum sealed-bid basis, the site saying a sale can draw five to ten bids, after an appraisal done by cruising on larger even stands or by tree count on small or irregular ones. Beyond the sale it lists timberland investment analysis, comprehensive management plans with growth-and-yield and economic projections, pulpwood and residential or development thinnings, disease and pest management, property tax reduction, damage and trespass appraisals and boundary line maintenance. The forestry side sits next to a working rural land brokerage: both owners are licensed brokers and Realtors and the firm publishes its own listings, so a landowner deciding between selling timber and selling the tract can put both questions to the same office. As described on carolinaforestry.com, read 22 September 2026.
Seven registered foresters is the top of the range on the state register, and it comes attached to eighty-four counties — mountains to the Outer Banks, with very little of North Carolina out of reach. Scale like that means a landowner isn't waiting on one person's calendar, and it means the firm doesn't vanish when someone retires. Nineteen services: wetland delineation, environmental impact statements, forest taxation and urban forestry, alongside the appraisal, cruise and sale-administration combination a competitive timber sale actually runs on. ACF and SAF. The firm trades as GFR Forestry Consultants and dates itself to 1964, and it works from four North Carolina offices — Raleigh, Lillington, Tarboro and Lake Waccamaw — with its published service area running beyond the state line into South Carolina, Virginia, Maryland and the Eastern Shore. Its own account of a timber sale runs from stand assessment through a sale announcement and marketing plan to bid management, handled by foresters it says keep current on local buyers, pricing and competition; on the management side it names timber inventory and valuation, timber trespass analysis, forest management planning, GIS mapping, boundary line location and maintenance, pulpwood thinning, pest and disease control, fire protection measures and hunt and lease management. Two services sit outside the usual consulting list: timber basis determination and tax planning for estates and long-held family land, and wood flow and logistics work for landowners or businesses moving product to buyers. It also runs a rural real estate side, brokering timberland, hunting and agricultural tracts through licensed N.C. brokers. As described on gfrforestry.com, read 22 September 2026.
Every county in North Carolina is listed against this firm — all 100 — which puts it in the small group on the register that will work anywhere in the state. The service list is narrow by comparison: ten entries, built tight around the sale itself, with appraisal, cruising and sale and contract administration at the middle and forest taxation, utilization and marketing, urban forestry and stewardship plans around them. Both ACF and SAF memberships are recorded. One registered forester covers that ground, which is worth knowing when you're arranging a visit.
True North Forest Management Services is a sole practice run by David P. Halley, listed on the N.C. Forest Service consulting-forester register as North Carolina Registered Forester #1428, with a register entry covering 18 counties across the northern piedmont from Alamance and Orange through Wake and Johnston down to Richmond and Hoke at the edge of the Sandhills, and recording 15 services including timber appraisal, cruising, sale and contract administration, reforestation, timber stand improvement, prescribed burning, forest taxation, herbicide recommendations, wildlife management and stewardship plans. The firm says on its own site that Halley established it after moving to North Carolina in 1999, and describes it as a full service forestry consulting and natural resources management company based in Holly Springs that primarily serves private forest landowners in Wake, Harnett, Chatham, Orange, Durham, Moore, Lee, Vance, Granville, Person, Alamance, Johnston and Franklin counties. It says its clients are mostly small non-industrial private landowners and that it builds a management program around each owner's aims, which it says may be income, value appreciation, improved wildlife habitat or better recreational use of the property; its services are unbundled, the firm says, so a client can take only what is needed or a turnkey program covering every aspect of forest management. Beyond the register list the site names longleaf pine restoration, hardwood and pine management, hunting lease management, boundary line maintenance, cost-share assistance, forest aesthetics and recreational trail enhancements. Halley is a Society of American Foresters Certified Forester (#1982), a Certified Forest Stewardship Plan Contractor and a 2000 graduate of the North Carolina Natural Resources Leadership Institute; the site also lists membership of the North Carolina Tree Farm Committee, the Forest Landowners Association, the Society of American Foresters and the Forest Stewards Guild. The firm invites landowners to arrange a no-obligation first inspection of their timberlands. On tract size the firm addresses landowners in its own words as “whether you own 10 acres or 1,000 acres”, so ten acres is the smallest holding it states it works with. As described on truenorthforestry.biz, read 23 September 2026.
Every service the state's A–U schedule covers is on this record — all twenty, more than 98 percent of firms on the register. So the timber-sale core of appraisal, cruise and sale administration sits alongside surveying, wetland delineation, prescribed burning, Christmas tree management and urban forestry. A landowner with a boundary question or a wet corner can get both answered on the same visit as the cruise. Coverage spans forty counties, from the north-central piedmont down through the sandhills and out to the southeastern coast. Memberships in the Society of American Foresters and the International Society of Arboriculture are recorded; no website is.
Central and northern piedmont work: nineteen counties anchored on the Triad and running out to Surry, Alleghany, Moore and Lee. Twelve services, including the three a timber sale needs — valuing the stand, cruising it, and administering the sale — plus logging engineering, prescribed burning and forest taxation. One registered forester. No association memberships or website are listed in the register.
Tight and central: sixteen counties through the middle and north of the piedmont, with Davidson, Davie, Rowan and Randolph at the core, Surry and Stokes up on the Virginia line, and Granville and Person to the east. Ten services, appraisal, cruising and sale administration among them, so a stand can be valued, measured and taken to sale. Forest taxation and forest real estate are also recorded — the questions that surface when land and timber change hands at the same time.
Eastern Forest Consultants describes itself as a professional forest consulting firm serving the eastern United States, based in Clemmons with an additional office in Christiansburg, Virginia. Its primary client is the non-industrial private forest landowner, and the firm says it has found a niche providing services for landowners with relatively small projects, starting with a free initial consultation and a site visit with a forester. Its argument to owners is that active management beats letting a stand develop naturally, yielding greater returns in less time, and that neglect carries real risk from catastrophic wildfire, invasive species and forest pests, whether the objective is income, wildlife, hunting or long-term stewardship. It recommends a management plan that is kept current and actually executed. Published services include timber sales, timber inventory, management plans, herbicide application, tree planting, boundary line recon and painting, crop tree release, pre-commercial thinning, forest road layout, GPS and GIS mapping, and timber trespass resolution. The firm also contracts its crews to other consultants and agencies on an hourly, daily or production basis, and maintains relationships with the North Carolina Forest Service, the Virginia Department of Forestry and the U.S. Forest Service. State registration covers fifty-one counties across the mountains and piedmont. As described on easternforestconsultants.com, read 23 September 2026.
Registration number 208 is the fifth-oldest on the state register, a tenure very few listings can match. Thirty-six counties spread across the central piedmont, the Sandhills and the inner coastal plain, from Rockingham and Caswell on the Virginia line down to Scotland and Robeson. Eleven services, a focused list: appraisal, cruise and sale administration, reforestation, timber stand improvement, herbicide application, forest real estate and stewardship plans.
Sanford sits on the hinge between the Sandhills and the central piedmont, and that is the shape of this practice — nineteen counties out from there, west to Montgomery, north to Caswell and Person, east to Duplin and Pender. Sixteen services is a broad list for a one-forester firm: the sale trio, plus logging engineering, prescribed burning, forest taxation, forest real estate, wetland delineation and urban forestry. Registration 781 is fiftieth-oldest of the 178 on the register. No associations or website are listed.
From Louisburg the coverage runs west to Durham and Orange, south through Wake and Johnston, and east into Edgecombe and Northampton — twenty-one counties straddling the line where the northern piedmont gives way to the coastal plain. The register lists the full sale set: appraisal, cruise, and administration of the sale itself. Logging engineering, herbicide application and stand improvement round it out, a list built around getting timber cut and the ground back into production rather than around consulting extras.
Forty-seven counties is wide coverage by any measure — more than double what the median firm on the register carries — and this footprint runs from the Uwharries and the Charlotte-to-Triad piedmont north to the Virginia line and west into Wilkes, Watauga, Ashe and Avery, with a southern arm through the sandhills at Hoke, Scotland and Cumberland. Sixteen services, the complete sale set among them: appraisal, cruise, sale administration. Wetland delineation and urban forestry on the same list is a less common pairing.
Yadkin Forestry & Realty has been serving landowners since 1997, and the practice pairs forestry consulting with real estate — the site points visitors to an affiliated brokerage at YadkinRealEstate.com. Its stated objective is to work closely with landowners to protect and promote their interests in forestry and land-related practices, with a consulting forester who stays current on market trends so clients get the best value from their forestry investments. Todd Dowdle is described on the about page as a Registered Forester in both North and South Carolina, a Certified Arborist with the International Society of Arboriculture and a licensed North Carolina Real Estate Broker, holding a bachelor's degree in Forest Resource Management from NC State University along with study in Forest Resources at Penn State University and business management. The firm's own service list runs to timber sales and appraisals, reforestation, acquisition tax basis work, pine thinning, prescribed fire, timberland sales and acquisition, management plans, boundary maintenance, GPS/GIS mapping and real estate sales and acquisition, with further pages on insect control, herbicide and fertiliser, wildlife and recreation, tax incentives and forest economics. On timber sales it describes advertising the sale, securing and evaluating bids, preparing and enforcing contracts, and pre-planning and managing the logging operation, and it frames management planning as aiming at the highest economic return while potentially reducing annual county land taxes. On reforestation it makes an explicit case for genetically improved loblolly: a naturally regenerated hardwood stand typically produces around 50 to 60 mature trees per acre by 60 to 70 years of age, while improved loblolly seedlings can yield 110 to 120 mature sawtimber trees per acre on a 30 to 40 year rotation. Affiliations named on the site are the Association of Consulting Foresters of America, Society of American Foresters as a Certified Forester, the International Society of Arboriculture as a Certified Arborist, the Tree Farm Program as an inspector, and the NC Forestry Association. The register territory is thirty-seven counties across most of the piedmont — Mecklenburg and Wake at either end, Randolph and Davidson in between — climbing into the northwestern mountain counties of Ashe, Alleghany, Avery and Watauga; the firm's own pages describe the practice in terms of North and South Carolina rather than a county list. (source: yadkinforestry.com, read 22 September 2026)
Ridgerunner Forestry, LLC is based at Pilot, just over the Virginia line, and the directory records coverage of twenty-six North Carolina counties across the northern piedmont and the northwestern mountains, from Rockingham, Caswell, Person and Granville along the border west through Surry and Wilkes to Ashe, Watauga and Avery. The firm's own site carries the line Since 1988 and says that since its beginning Ridgerunner has strived to provide a variety of professional services to private landowners and industry clients alike, while maintaining high ethical standards with a focus on customer service. It describes its audience as forest landowners in the southeast and beyond, and names timber appraisal and sales, wildlife management and conservation easements among the matters it covers for them. Its own pages add timber cruising, stewardship plans, mapping, the tax implications of forest ownership, and a projects page showing the outcome of recent work. Landowners are invited to call or email with any questions about the management of their forestland. As described on ridgerunnerforestry.com, read 22 September 2026.
Forty-six counties, close to half the state, and nearly all of it east of the piedmont: the Roanoke and Tar drainages, the full northeastern coastal plain, south through Craven and Onslow, out to Dare, Hyde and Tyrrell, with a western reach into Guilford, Alamance and Durham. Very few firms on the register cover that much ground with a single registered forester. Fifteen services, from appraisal, cruise and sale administration through prescribed burning, herbicide work, recreation and urban forestry. No website is listed.
Blanton Forestry, PLLC is a one-forester practice in Dobson, Surry County, whose N.C. Forest Service consulting-forester register entry covers 29 counties reaching from the northern mountains through the foothills to the Charlotte suburbs and records nine services: forest management plans and mapping, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, logging engineering, recreation management, forest taxation and wildlife management. The firm describes itself on its own site as a forestry-wildlife consulting business located in Surry County and serving northwest North Carolina and southwest Virginia, and says its mission is to help landowners manage their natural resources to accomplish their goals, which it says can range from managing timber for income to creating better wildlife habitat; it notes that forest management is a long term process and that income from it is usually a once in a lifetime event for most landowners. On services the firm says it provides inventory work for timber buyers, sawmills and other consultants; timber appraisals used to judge the timing of a sale, establish timber basis or value an estate; forest and wildlife management plans, which it notes are also required to qualify for Present Use Evaluation for deferred county property taxes; and timber sales, for which it says it locates the sale boundaries, conducts an appraisal, provides an estimated market value, sends notices to prospective buyers, runs the sale and oversees the harvest. The site publishes a table of its timber sales with acreage and volume for each, showing tracts from a few acres up to parcels of around fifty acres in Surry, Yadkin and Stokes counties and one in Carroll County, Virginia. The firm is owned and operated by Chris Blanton, who the site says holds dual B.S. degrees in fisheries and wildlife management and forest management, graduated in 1998, and has since worked in contract forestry services and consulting forestry; he is a Registered Consulting Forester in North Carolina and, in the firm's words, a candidate member of the ACF. The firm publishes its completed timber sales with the tract size of each, and the smallest of them is the Stroud sale in Surry County at 3.2 acres (65 MBF), so it has demonstrably worked a tract that size; the minimum recorded here is taken from that job rather than from a stated policy, and the firm is welcome to correct it. As described on blantonforestry.com, read 23 September 2026.
Surveying, wetland delineation, environmental impact statements, prescribed burning, urban forestry, forest taxation — the register lists twenty services here, as many as any firm on it carries, and appraisal, cruising and sale administration are among them. The territory is thirty-six counties, reaching from the northern piedmont around Durham and Granville east across the coastal plain to Currituck, Dare and Hyde, with a southern arm into Cumberland, Hoke and Robeson.
Two registered foresters and eighteen services inside a fifteen-county footprint — an unusual pairing, the breadth of a large firm in the geography of a local one. The ground is the Roanoke valley and the northern coastal plain: Halifax, Northampton, Warren and Bertie across to Nash, Wilson and Edgecombe. Appraisal, cruise and sale administration are all there, and the list keeps going well past the sale into prescribed burning, wetland delineation, forest taxation, Christmas trees, wildlife and recreation. It also holds one of the ten oldest registrations in the state register, and the firm is an ACF member.
Kiker Resource Management works out of Wadesboro, at the centre of a thirty-six county North Carolina territory that runs west to Cleveland and Gaston, north through Mecklenburg, Iredell, Durham and Granville, and east across the Sandhills to Brunswick, New Hanover and Pender. Its own site casts the practice wider still, describing work throughout the southeastern United States including Virginia and South Carolina, with a second office at Anderson, South Carolina. The home page sums the firm up as 'forest resource management, wildlife management consulting services, land sales', and it publishes service pages for timber sales, forest and land management, reforestation, prescribed burning, hunting leases, mapping and technical services, wildlife management consulting, forest certification and real estate. The forest and land management page says KRM starts every job by learning the landowner's objectives, whether that is long-term management of high-yield pine plantations, wildlife habitat improvement, a one-time harvest or outdoor recreation, then inventories species composition, stand origin, acreage, site quality and stocking before writing a plan carrying timber value estimates, harvest schedules and cash flow estimates. The reforestation page is the most detailed: KRM reforests an average of 2,500 acres a year for clients, buys about 1.5 million genetically improved seedlings annually, keeps an employee with the planting crews full time for quality control, and puts its herbicide and tree planting work out to bid each year. Its history page dates the practice to June 1978 under a predecessor name, Kiker Forestry and Realty, Inc., with the present LLC formed when Jason Kiker bought the firm in 2007, and counted ten full-time and two part-time employees in 2023, among them eight graduate foresters. The firm also holds an FSC group certificate and takes part in the American Tree Farm System. As described on kikerforestry.com, read 23 September 2026.
Registration 392 is the tenth-oldest entry on the North Carolina register, about as long a tenure as this directory contains. Coverage runs seventy counties — the entire mountain west, the whole piedmont, and down through the sandhills to the southeastern coast, stopping short only of the northeastern corner. Thirteen services, including appraisal, cruising and sale administration, plus forest taxation, forest real estate and prescribed burning. For a landowner whose sale is tangled up with an estate or a tax question, that last combination is the point.
Most of the coastal plain is in range here — Northampton and Halifax in the north, down through the Neuse and Cape Fear country to Brunswick — thirty-four counties in all, well above the register's median of twenty, with Caswell, Person, Lee and Moore attached on the piedmont side. Appraisal, cruise and sale administration are all listed, along with prescribed burning, herbicide application, forest real estate and forest taxation. Registration 578 is among the older on the register, and the firm holds ACF membership, which is limited to full-time consultants.
Alliance Forestry, Inc. is a forestry consulting business based in Dallas, North Carolina. The Dallas office, led by Brian Medlock, covers Western NC, SC, and VA. The company also has a branch in Tarboro, North Carolina, run by Mike Wittig, covering Eastern NC, SC, and VA. On the consulting side, the work includes timber sales, appraisals, inventories, forest management plans including Forest Stewardship plans, boundary line maintenance, and forest taxation assistance. The staff includes NC Registered Foresters, and the business holds N.C. Registered Forester #1124. They also do land clearing and site work, custom herbicide applications for utility companies managing rights-of-way, and forestry herbicide work by aerial, ground, and backpack methods, as licensed pesticide applicators in NC, SC, and VA. On the planting side, they put in over a million seedlings a year, including loblolly pine, longleaf pine, and a variety of hardwood species, with guidance on genetics, planting density, and seedling type. Mapping is handled through GIS and GPS work, and "Acreage determinations can be made in the office or the field." Wildlife management services cover food plots, prescribed burning, and removal of nuisance animals including beavers. This suits a landowner who wants one outfit that can run a timber sale, handle the paperwork and mapping, and also come back later for planting or herbicide work, rather than hiring out each piece separately. From allianceforestry.com, read 10 October 2026.
Fifty-nine counties from a one-forester office in Beulaville — effectively the whole coastal plain, from the Currituck and Dare marshes south to Brunswick, plus a long reach west through the Triad into Surry and Yadkin. Eighteen services puts this firm near the top of the register for breadth, and two of them are worth noticing: wetland delineation and environmental impact statements, which matter if the tract has bottomland or a permitting question attached to it. Valuation, cruising and sale administration are all covered. No website is listed.
The office is over the state line in Rock Hill, South Carolina, but the coverage is anything but local — 48 North Carolina counties, from Union and Mecklenburg up through the Triad and out west as far as Madison, Mitchell and Yancey. Appraisal, cruising and sale administration are all recorded, the set needed to run a competitive sale end to end. ACF membership marks this as full-time consulting work. Twelve services in total; no website on the register.
All one hundred counties — one of the few listings on the register that covers the entire state. The registration here is number 8, the second-oldest of the 178 registrations on the register, which is about as long a tenure as North Carolina forestry has to offer. Beyond the sale work of appraisal, cruise and contract administration, this firm surveys, so a boundary question and a timber cruise can be settled on the same visit. Christmas tree management, wetland delineation and environmental impact statements are also listed.
Crawford Forest Management is a consulting forestry firm based in Wilmington that works with private landowners across southeastern North Carolina, naming Bladen, Brunswick, Columbus, Duplin, New Hanover, Pender and Sampson counties on its own site, while the state register carries it for Alamance, Caswell, Onslow and Robeson as well. The firm is owned and operated by Noah Crawford, a registered consulting forester with more than five years in the industry who previously worked for an established consulting forestry firm where he actively managed over 20,000 acres of timberland. He holds a Master of Forestry from North Carolina State University and a bachelor of science in environmental science with a minor in economics from UNC Wilmington, a combination the firm says lets it speak to land economics as well as silviculture. The published services run from full timber sale management, covering cruising, marketing, bid solicitation and contract oversight, through forest management planning, timber inventory and appraisal, reforestation and site preparation, long-term landowner and harvest-schedule consulting, help enrolling in federal and state cost-share programs, boundary identification and mapping, and Tree Farm certification support. As described on crawfordforest.com, read 23 September 2026.
Milliken Advisors Inc. is a forestry consulting and timberland brokerage business in Columbia, North Carolina. It works with landowners on the kind of jobs that come with owning timberland, from planning a sale to planting trees back after a harvest. The work on offer covers forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, insect, disease and fire protection, prescribed burning, forest real estate, recreation management, forest taxation, utilization and marketing, herbicide application, and stewardship plans. The forester holds N.C. Registered Forester credential #1394. Milliken Advisors serves landowners across a long list of North Carolina counties, among them Wake, Mecklenburg, Guilford, Buncombe, and Dare. The business has been working with landowners since 1949. Its own description of how a job runs is plain: "Once we know what you want, we take a good look at your land: its current state, what's happening in the market, and what the future could hold. Then we build a strategy that actually fits your needs." On follow-through, it says "You don't have to worry about juggling contractors or chasing down deadlines." This fits a landowner who wants one firm to handle a timber sale or a management plan from start to finish, rather than piecing the work together themselves. From millikenadvisors.com, read 10 October 2026.
Statewide coverage — all 100 North Carolina counties — from an office in Gainesville, Georgia. Fifteen services are recorded, including the three that make a timber sale work: appraisal, cruising, and sale and contract administration. Prescribed burning, herbicide application, urban forestry and stewardship plans fill out the rest. The register carries this entry under the name US Forest Service, with one N.C. Registered Forester and no website given.
The N.C. Forest Service register carries Dougherty & Dougherty across sixty-three North Carolina counties, foothills through piedmont to coastal plain — but the firm is run from Georgia. The register address is a PO box in Athens, Georgia, and the North Carolina connection is Derek Dougherty's registration, number 1029, rather than a North Carolina office. Trading as Progressive Forestry, the firm's site states that it “manages forest land for private forest landowners in the Southeastern US” with staff it describes as “college-educated, field-trained, and licensed forestry professionals,” and says its experience spans forest management, real estate investment, research and tree breeding. Its timberland management page sets the services out in detail: property and annual inspections, timber inventory reported in tons, cords or thousand board feet by species and product class, timber appraisal, boundary line marking, prescribed understory burning, plantation establishment, seed source selection, mid-rotation work, GIS mapping, growth and yield modelling, harvest scheduling and forest investment analysis. It also answers a question the register leaves open. The register credits the firm with appraisal and cruising but not with sale administration; the site says the firm prepares and oversees the marketing and harvest itself, by negotiation or sealed bid, with lump-sum or per-unit payment and clear-cut, select-cut or thinning harvests, including logging inspections and its own timber security and tracking system. The firm states it is a certified Forest Stewardship Program plan writer in North Carolina. Hardwood is treated as a speciality: the site argues the South's hardwood resource sits “well below its potential” after a history of high-grading, and describes a system of site and stand evaluation aimed at regular production of grade hardwood. Species named across the site include loblolly, longleaf and slash pine, green ash, yellow poplar and eucalyptus. A consultation line covers audits, seedling advice and expert witness work on timber trespass overcuts and failed plantations. No founding year is published. As described on progressiveforestry.com, read 23 September 2026.
Worth reading the service list closely here. The register credits this entry with timber cruising and sale administration but not timber appraisal — so the valuation step most landowners want before going to market isn't among the listed services. What is listed is broad: 48 counties across the northeastern piedmont and most of the coastal plain, plus reforestation, forest real estate, wildlife management and stewardship plans. The office address is Atlanta, Georgia. No website is on file.
Peachland is the mill that takes what other yards turn away - gum, hickory, elm, hackberry and sycamore - cutting soft hardwoods into industrial timbers, cross ties and switch ties at a reported 16,000 to 18,000 board feet an hour. Edwards acquired the site in 2012; the parent company started in 1969 out of a dirt-floor chicken house in Marshville and now runs six North Carolina locations along with its own timber company and trucking arm. It is second-generation family owned and FSC certified company-wide. The NC Forest Service's Anson County register lists the Peachland mill as buying standing timber, hardwood grade logs, miscellaneous hardwood sawlogs and pine sawlogs, so a landowner sitting on a mixed, low-grade hardwood stand has a genuine outlet here.
Hunt Forest Resources, LLC is a timber buyer based in Moncure, North Carolina, with forestry consulting, firewood, and wood recycling run alongside it. They buy stumpage, sawlogs, pulpwood, and chip-n-saw timber in pine and hardwood, and they also handle forest management plans and mapping, timber cruise and volume estimates, timber appraisal, timber sale and contract administration, reforestation, timber stand improvement, prescribed burning, herbicide application, insect and fire protection, and wildlife and recreation management. Their registered forester holds N.C. Registered Forester #1438, and the company carries ProLogger and American Tree Farm System (ATFS) standing. They work across a long list of North Carolina counties, from Alamance, Durham, and Wake, through Chatham and Moore, down to Brunswick and New Hanover, and out east to Dare, Hyde, and Beaufort, along with many others. On their own pages they describe offering "a diverse range of services that span the entire lifecycle of forest products, from land and timber management to sustainable harvesting, real estate services, wood products manufacturing and beyond," and say they manage "7,000 acres of timberland annually" across four facilities in the state. This suits a landowner who wants one outfit that can buy the timber, write the management plan, and keep an eye on the ground afterward, rather than stitching together a buyer, a consultant, and a logger separately. From huntforestry.com, read 10 October 2026.
Barker Timber Management is a logging contractor in Semora, North Carolina. It has a Google Maps business listing in that category. It is also listed as a consulting forester. A listing here is not an endorsement.
Piedmont Timber - Full Service Timber Company is a logging contractor in Greensboro, North Carolina. It has a Google Maps business listing in that category. It is also listed as a timber buyer and a consulting forester. A listing here is not an endorsement.
Timber Buyers, Loggers & Mills in Caswell County (1)
This buyer is based in Caswell County. Being close matters: hauling is one of the biggest costs taken out of your check.
Tri-State Land & Timber, LLC is a timber buyer in Pelham, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber. It covers 6 counties, including Alamance, Caswell, Durham and Orange. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Timber Buyers, Loggers & Mills Nearby (43)
Businesses that buy, cut or mill timber in Caswell County, working from a nearby town.
All-Woods Timber Company, Inc. is a timber buyer in Hurdle Mills, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine and All Hardwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 12 counties, including Alamance, Caswell, Chatham and Durham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Panel and veneer production, not sawn lumber, is what happens at the Corinth Road plant: the Forest Products Locator classifies the facility as “Veneer Plywood Panels” and records it as taking both softwood and hardwood. The Manufactured in North Carolina supplier database lists 256 employees on site and gives the product line as composite panels and mouldings. The plant belongs to ARAUCO, which describes itself as a global forest products manufacturer with more than 50 years of manufacturing experience and distribution to over 3,500 destinations across North America. Its place on this list as a timber buyer comes from the NC Forest Service register.
Behind the PO Box mailing address is a working mill. The Forest Products Locator and an OSHA inspection record independently place Blue Ox at 190 Sawmill Road in Stoneville and classify it as an operating sawmill (NAICS 321113) cutting both softwood and hardwood. Its buying list is wider than most Piedmont mills — the NC Forest Service register adds sweetgum, black and tupelo gum, beech and ash to the usual oaks, poplar and pine, which matters on a mixed tract where odd-species stems otherwise get left standing. It buys in Stokes County as well as Rockingham. The only regulatory history found is a planned OSHA safety inspection opened in July 2013 and closed that September with one serious and six other violations, settled informally for $325.
Bowling Logging and Chipping is a timber buyer based in Ridgeway, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood, Clean Chips and Fuel Chips. It covers 9 counties, including Alamance, Caswell, Davidson and Davie. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Braxton Sawmill Inc is a logging contractor in Graham, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.
This is the corporate option in Alamance County — one of 17 Canfor mills across the US South, and ranked far larger by the Forest Products Locator than the independent mills listed nearby. It buys Southern Yellow Pine only, as standing timber and sawlogs, so a hardwood stand is not a fit here; a pine tract gets a buyer whose procurement is handled by a staff forester listed on the state register. The mill holds an NC Title V air quality operating permit, which DEQ put out for public comment in spring 2024. Log-truck drivers reviewing the yard describe fast loading and an overnight tarping lot across the street: "Quick to load maybe a 40 min wait. In n out no issues."
Carolina Wood Enterprises, Inc. is a timber buyer in Siler City, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Standing Timber and Sawlogs. It covers 13 counties, including Alamance, Caswell, Chatham and Durham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Claybourn Walters Logging Co is a logging contractor in Fairmont, North Carolina. It has a Google Maps business listing in that category. It is also listed as a timber buyer. A listing here is not an endorsement.
Incorporated in April 1974, Elkins Sawmill is run by three officers who all share the family name. The Better Business Bureau rates it A+ — the company is not BBB accredited — and describes the product line as lumber, crossties, mulch and firewood, broader than the stumpage, sawlog and pulpwood purchasing the state register records. Besides the King Road mill in Moncure, the company also operates from an address in Goldston. It appears in the North Carolina Forestry Association's Buyer's Guide under timber buyers, though that guide carries non-member businesses alongside members, so membership should not be assumed.
Two trucks and two drivers is what the federal motor carrier register shows for this outfit as of its October 2024 MCS-150 filing under USDOT 3349173 — a small crew that hauls its own wood rather than subcontracting it out. It buys standing timber, sawlogs and pulpwood in all hardwood and softwood species, and appears on the Stokes County buyer register as well as Rockingham's. Worth knowing if you are calling around: its yard on Anglin Mill Road sits roughly a mile from Shelton Logging & Chipping at 2861 Anglin Mill Road, two separately incorporated Shelton logging businesses on the same road. FMCSA also carries a second number for the business, (336) 573-9551. No website, Facebook page or published reviews were found.
Gregory Pallet Co., LLC is a timber buyer in Elon, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Chip-N-Saw Logs, Ply or Veneer Logs, Pulpwood, Poles and Lumber. It covers 13 counties, including Alamance, Caswell, Chatham and Davidson. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
The NC Forest Service timber buyers register is the only record that could be found for this company. It lists stumpage purchase and timber cruising across eleven counties in the central Piedmont, with a five-acre minimum tract — a smaller floor than some buyers will consider. Repeated searches turned up no website, no Facebook page, no directory profile, no reviews and no founding date, so nothing beyond the register entry has been independently confirmed.
Hopkins Lumber Contractors is a timber buyer based in Stuart, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine, E White Pine, Ash, Basswood, Beech, Black Gum, Black Locust and Cherry. Products: Standing Timber, Sawlogs, Pulpwood and Sawdust. It covers 7 counties, including Caswell, Forsyth, Guilford and Person. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Hopkins Lumber Contractors is a timber business based in Ridgeway, North Carolina. It is listed under timber buyers, and the products it lists are standing timber, sawlogs, pulpwood and sawdust. That covers trees still standing in the woods, the larger logs a sawmill cuts into boards, and the smaller wood that goes to pulp. The species it handles are southern yellow pine, eastern white pine, ash, basswood, beech, black gum, black locust, cherry, hickory, soft maple, red oak, white oak, sweetgum, walnut and yellow poplar. The counties it serves are Caswell, Forsyth, Guilford, Person, Rockingham, Stokes and Surry. It suits a landowner in one of those seven counties who has walnut, cherry, white oak or yellow poplar standing and wants one business to take the sawlogs, pulpwood and sawdust along with the standing trees. From hopkinslumber.com, read 17 October 2026.
Independent Timber Co is a timber buyer based in Dry Fork, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine, Yellow Poplar, Sweetgum, Soft Maple, Black/Tupelo Gum, Red Oak, White Oak and Hickory. Products: Standing Timber, Sawlogs, Chip-N-Saw Logs, Ply or Veneer Logs, Pulpwood and Poles. It covers 7 counties, including Alamance, Caswell, Granville and Guilford. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
J & J Logging is a logging contractor in Henderson, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.
Keck Logging Co is a logging contractor in Gibsonville, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.
Marley Grading, Logging is a timber buyer in Pittsboro, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Chips. It covers 10 counties, including Alamance, Caswell, Chatham and Guilford. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Pete Harrelson Logging is a logging contractor in Elon, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.
The BBB puts this Sanford operation's start date at September 14, 1971 — around 54 years of trading by the bureau's own file — though it is not BBB accredited and carries no rating, the bureau stating it has insufficient information to issue one. The N.C. Forest Service register lists the company buying all hardwood and softwood species as standing timber, sawlogs and pulpwood, broader than the single "mixed hardwoods" entry this listing previously carried. Manta categorises the business under pulpwood and shows about six employees. No website, Facebook page or published reviews were found anywhere.
Pine State Group, Inc. is a timber buyer in Eden, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Chips. It covers 7 counties, including Alamance, Caswell, Forsyth and Guilford. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Pulliam Logging is a timber buyer in Semora, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers Alamance, Caswell, Orange and Person counties. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
R J Thompson Harvesting, LLC is a timber buyer in Semora, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Chips. It covers 5 counties, including Caswell, Durham, Granville and Orange. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Southern Veneer Specialty is a timber buyer in Moncure, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Ply or Veneer Logs. It covers 48 counties, including Alamance, Anson, Beaufort and Bertie. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Stewart's Forest Services, Inc. is a timber buyer in Germantown, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 99 counties, including Alamance, Alexander, Alleghany and Anson. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Stone Timber Products, Inc. is a timber buyer in Sims, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 41 counties, including Alamance, Anson, Caswell and Chatham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Incorporated in October 1997 and still listed Current-Active with the NC Secretary of State, Stoneville Lumber holds something no other buyer in the Stoneville cluster does: a USDA APHIS-PPQ compliance agreement authorising it to receive logs from Canadian areas under gypsy moth quarantine, one of only 52 North Carolina facilities on that federal list. Its product range on the NC Forest Service register is the broadest around — standing timber, sawlogs, chip-n-saw, pulpwood, veneer and plywood logs, sawdust, chips and finished lumber — covering both what comes off a tract and what comes out of a mill. It is also one of the few Piedmont buyers that lists black walnut and cherry, two high-value specialty hardwoods most of its neighbours do not name. No website, Facebook page or published reviews were found.
Taylor Logging Co., LLC is a timber buyer in Efland, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 7 counties, including Alamance, Caswell, Chatham and Durham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Thomas Carter Logging is a timber buyer in Reidsville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 7 counties, including Alamance, Caswell, Forsyth and Guilford. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Thurman Timber LLC is a timber buyer based in Spencer. The business buys and cuts standing timber, and it also does logging, forest management, pine thinning, hardwood management and reforestation. It buys southern yellow pine and all hardwoods. The counties it serves are Caswell, Guilford, Rockingham and Stokes, and it operates in Central NC and Southside VA. Tim Thurman owns and runs the company, which has been in business since 2004. He has more than 30 years of experience as a registered forester. Matt Thurman, who spent 7 years with the Virginia Department of Forestry, monitors harvests and cruises timber. The company offers free appraisals for lump sum sales and per unit sales. It can also help with forest management plans and timber tax basis, and it buys timberland. The minimum is 20 acres. It uses modern equipment to reduce harvest waste, and its aim is to give owners "top financial return for their timber," along with a professional logging job and protection of the land and water. Thurman Timber LLC suits a landowner with at least 20 acres of pine or hardwood in Central NC, Southside VA, or the four counties named above, who wants a free appraisal before choosing between a lump sum and a per unit sale. From thurmantimber.com, read 17 October 2026.
Timbco, LLC is a timber procurement company based in Morrisville, North Carolina. It operates throughout Central North Carolina, Southside Virginia, and the Sandhills of North Carolina, buying standing timber and arranging the harvest. Its work covers clear cutting, first and second thinning of pine plantations, shelter-wood harvests, wildlife habitat enhancement, development harvests, and reforestation or replanting. Its product list runs from standing timber to sawlogs, chip-n-saw, pulpwood, ply or veneer logs, and poles, in both hardwoods and softwoods. The minimum is 15 acres of harvestable timber, because the equipment is large and costly to move. A visit to look at your timber is free for tracts of 15 acres or more, and you are under no obligation to sell. Timbco, LLC prefers 24 month contracts, which allow flexibility in scheduling harvests if ground or market conditions turn adverse. Each logging contractor it uses carries Workers Compensation and General Liability Insurance, which the company requires before anyone harvests for it. Phillip Smith is an NC Registered Forester. Founders Jason Wallace and Phillip Smith have over 40 years of combined experience in the North Carolina and Virginia timber industry, and the firm belongs to the North Carolina and Virginia Forestry Associations. It has offices in Morrisville, South Boston, Rocky Mount, and Greensboro. Its approach is "hands on" from the first landowner meeting through reforestation. Timbco, LLC suits a landowner with at least 15 acres of harvestable timber in Central North Carolina, Southside Virginia, or the Sandhills who wants a forester involved from the first visit through replanting. From timbcollc.com, read 10 October 2026.
Triangle East Timber Co Inc is a logging contractor in Mt Olive, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.
Triple N Lumber Co., LLC is a timber buyer in Eden, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Sawlogs, Standing Timber, Pulpwood and Chips. It covers 7 counties, including Alamance, Caswell, Forsyth and Guilford. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Turner Hargrove Logging is a timber buyer in Siler City, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Chips. It covers 12 counties, including Alamance, Caswell, Chatham and Durham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Uwharrie Lumber Co. is a timber buyer and mill based in Troy, North Carolina. They buy stumpage, sawlogs, and pulpwood, and they run a hardwood sawmill too, so they can take wood from standing timber through to sawn lumber. They work with Red Oak, White Oak, Yellow-Poplar, Hickory, and Mixed Hardwoods. They serve a wide stretch of counties: Alamance, Anson, Cabarrus, Caswell, Chatham, Cleveland, Cumberland, Davidson, Davie, Durham, and Forsyth. There's no stated minimum acreage, and no clear word on how small a job they'll take on, so if you're sitting on a small lot it's worth a call to ask directly rather than guessing. This fits a landowner in or near that stretch of counties who has hardwood timber to sell, whether standing or cut, and wants someone who both buys logs and mills them. From uwharrielumber.com, read 10 October 2026.
WestRock Cascade Chip Mill is a timber buyer in Cascade, North Carolina. It buys standing timber, which means trees bought while they are still growing, and pulpwood, which is smaller wood cut to make pulp. It takes both hardwoods and softwoods, so a landowner with either kind of tree has a place to sell. Its work is in Caswell, Rockingham, and Stokes counties. A landowner in any of those three counties is in the area it serves. Standing timber and pulpwood are two different products, so know which one your trees are before you talk to any buyer. WestRock Cascade Chip Mill suits a landowner in Caswell, Rockingham, or Stokes county who has standing timber or pulpwood to sell, whether the trees are hardwood or softwood. From westrock.com, read 17 October 2026.
Wilbourne Land & Timber, Inc. is a timber buyer based in Clarksville, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 8 counties, including Caswell, Durham, Franklin and Granville. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Wilderness-Stuart Inc is a timber buyer based in Stuart, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods. Products: Standing Timber and Sawlogs. It covers 5 counties, including Alamance, Caswell, Guilford and Rockingham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Wilson Logging is a logging contractor in Ruffin, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.
Wood Forest Resources, LLC is a timber buyer in Wilson, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: Southern Yellow Pine, Ash, Red Oak, White Oak, Hickory, Sweetgum and Yellow Poplar. Products: Standing Timber, Sawlogs and Pulpwood. It covers 69 counties, including Alamance, Anson, Beaufort and Bertie. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.
Questions landowners ask
How many timber buyers and foresters serve Caswell County?
93 businesses are listed for Caswell County: 49 consulting foresters and 44 buyers, loggers and mills. 1 of them has an office in the county.
How much is my timber worth in Caswell County?
Nobody can tell you what your timber is worth without walking it. Value depends on the species, the size and grade of the trees, how thickly they stand, the ground conditions and how easily a logger can reach them. North Carolina State Extension publishes quarterly average stumpage prices by region, which tells you what the market is doing, not what your tract holds. Anyone who quotes you a figure without seeing the land is guessing, and a guess in that direction is rarely in your favour.
What stumpage value means →Do I need a forestry consultant to sell timber in Caswell County?
You do not have to use one. A consulting forester works for you rather than the buyer, marks the timber, runs a sealed-bid sale and typically charges a percentage of the sale. Research from several state extension services has found that timber sold through a consultant often returns enough more to cover the fee, though results vary by tract and by market. The decision usually turns on the size of the sale and whether you have sold timber before.
Do I need a forestry consultant? →Do I need a permit to cut timber in North Carolina?
There is no statewide permit to harvest timber on your own land in North Carolina, but several rules still apply: the Forest Practices Guidelines for water quality, local county and municipal ordinances that can regulate harvesting, and sedimentation rules where a stream is involved. Requirements vary by county, so check with the county before work starts.
Permits and rules in North Carolina →What is timber worth in Caswell County?
No price series is published for Caswell County on its own. North Carolina's latest published stumpage figures (NC State Extension, Q2 2026) put oak sawtimber at $48.96 per ton. What your own timber brings depends on the species, the size and amount of it, and how far it is from a mill. A timber cruise by a forester settles it.
Forester listings for Caswell County come from the North Carolina Forest Service register, revised 06-Apr-26. The register is updated quarterly.