Selling Timber in Rockingham County, NC

All 100 counties, which only a handful of firms on the state register can claim — wherever the tract sits in North Carolina, this one covers it. Two registered foresters, and the older of the two registrations is number 482, sixteenth-oldest of the 178 on the register. Appraisal, cruise and sale administration are all here, so a landowner can value the stand, measure it and run the sale through to contract in one place. Seventeen services in all, out as far as Christmas tree management, urban forestry and forest taxation. The firm holds Association of Consulting Foresters membership, which is limited to full-time consultants. The firm calls itself family owned and says it has run a consulting forestry business for over 40 years; William H. Lock has retired from full-time forestry work and his son Jonathan C. Barnes, who passed the state forestry exam in 2002, now runs the company as president. Alongside state registration in both North Carolina and Virginia it claims Certified Forester and Certified Arborist credentials, Tree Farm Inspector status and Technical Service Provider approval for NRCS cost-share programs, and it offers work turn-key — timber inventory, marketing, harvest inspection and reforestation through one office — plus timber tax basis estimates, timber trespass reports, growth models for income projections and landowner seminars and field tours. Real estate is the one thing it has pulled back from: the site says that side is now limited to advice and referrals rather than listing and selling land. Its public timber sale notices, bids taken sealed at the office, run from 2010 through 2021 and cover tracts from a few acres up to about 280, clustered in Rockingham, Guilford, Alamance and Caswell counties and over the line into Henry and Pittsylvania counties, Virginia. A first consultation is offered free. As described on whlock.com, read 22 September 2026.

A small territory, and a specific one: ten counties along the northern piedmont and the Virginia line — Caswell, Person, Granville and the northern edge of the Triangle. Twelve services, with an unusual pair among them, logging engineering and environmental impact statements, a combination that comes up when a tract has road, stream or permitting complications. Appraisal, cruising and sale administration are all on the register. No website is listed.

Fifty-eight counties is a big footprint — wider than nine out of ten firms on the register — and it stretches from the mountain counties around Watauga and Avery clear across the piedmont into the inner coastal plain at Wayne, Greene and Edgecombe. Two registered foresters, so the work does not stall if one is booked. Appraisal, cruising and sale administration are all listed, and unusually the firm pairs woodland work with urban forestry and an arboriculture credential, which matters if the tract sits on the edge of a growing town.

Registration 275 is the seventh oldest of the 178 on the N.C. Forest Service register — very few names on that list have been there longer. The territory is the northwestern piedmont: Forsyth, Guilford, Davidson and Rowan, up through the Yadkin Valley counties to Stokes, Surry and the Virginia line. Nine services, and it reads as a working forester's list rather than a full-service consultancy — management plans, reforestation, stand improvement, insect and fire protection, prescribed burning, and the appraisal, cruise and sale administration a sale runs on.

Daniel W. Edwards, Consulting Forester P.A. is a forestry consulting and timberland brokerage based in Asheboro, North Carolina. Dan Edwards works with landowners on timber and land matters across North Carolina, South Carolina and Virginia, with named service counties in North Carolina that include Randolph, Davidson, Forsyth, Guilford, Wake, Chatham, Orange, Durham, Johnston, Moore, Richmond, Robeson, Rowan and others. The work covers forest management plans and mapping, timber appraisal, timber cruise and volume estimate, timber sale and contract administration, insect, disease and fire protection, forest real estate, forest taxation, and utilization and marketing. Species worked with include loblolly pine, longleaf pine, yellow poplar, white oak, hickory, maple and gum. On a timber sale, the approach covers "timber valuation, buyer selection, sale preparation, contract terms, boundary considerations, harvest oversight, and post-harvest recommendations." For land purchases, Dan will "evaluate potential land purchases with regard to timber value, soils, local market values, and potential problems." No stated minimum acreage was found. The smallest job shown is +/- 23 Acres in Davie County, listed for sale. Dan Edwards holds N.C. Registered Forester #612 and is a licensed real estate broker in North Carolina. The business states over 40 years of experience. This fits a landowner in North Carolina, South Carolina or Virginia who wants one person to handle both the timber side and a possible land sale, rather than juggling a forester and a broker separately. From dedwardsforester.com, read 10 October 2026.

Tugwell Consulting Forestry, P.A. is a consulting forestry firm based in Asheboro, North Carolina. They work with landowners, private industry, and government agencies, handling timber inventory and appraisals, timber sales, forest management plans, timber harvest recommendations, thinnings, and reforestation. They also offer real estate services for timberland. Their work covers the full range a landowner might need: forest management plans and mapping, timber cruising and volume estimates, timber sale and contract administration, logging engineering, timber stand improvement, prescribed burning, wetland delineation, and wildlife management, among other services. The firm holds N.C. Registered Forester credential #775, and says it is "home of the 2016-2018 President of the Association of Consulting Foresters of America, Inc." They describe over 35 years of forestry experience. They are based in the center of North Carolina and serve landowners across a long list of counties, including Randolph, Guilford, Davidson, Chatham, Moore, Wake, Montgomery, and Richmond, among many others, and say they also travel into surrounding states to reach clients. Tugwell describes itself as "a privately owned business located in Asheboro, NC specializing in property management and timber investments," working with owners who want to raise property value, grow timber value, build a sustainable asset, or improve wildlife habitat. This fits a landowner anywhere in central North Carolina who wants one firm to handle the whole process, from walking the tract and writing the management plan through to running the timber sale itself, rather than hiring separate people for each step. From tugwellforestry.com, read 10 October 2026.

Eastern Forest Consultants describes itself as a professional forest consulting firm serving the eastern United States, based in Clemmons with an additional office in Christiansburg, Virginia. Its primary client is the non-industrial private forest landowner, and the firm says it has found a niche providing services for landowners with relatively small projects, starting with a free initial consultation and a site visit with a forester. Its argument to owners is that active management beats letting a stand develop naturally, yielding greater returns in less time, and that neglect carries real risk from catastrophic wildfire, invasive species and forest pests, whether the objective is income, wildlife, hunting or long-term stewardship. It recommends a management plan that is kept current and actually executed. Published services include timber sales, timber inventory, management plans, herbicide application, tree planting, boundary line recon and painting, crop tree release, pre-commercial thinning, forest road layout, GPS and GIS mapping, and timber trespass resolution. The firm also contracts its crews to other consultants and agencies on an hourly, daily or production basis, and maintains relationships with the North Carolina Forest Service, the Virginia Department of Forestry and the U.S. Forest Service. State registration covers fifty-one counties across the mountains and piedmont. As described on easternforestconsultants.com, read 23 September 2026.

Central and northern piedmont work: nineteen counties anchored on the Triad and running out to Surry, Alleghany, Moore and Lee. Twelve services, including the three a timber sale needs — valuing the stand, cruising it, and administering the sale — plus logging engineering, prescribed burning and forest taxation. One registered forester. No association memberships or website are listed in the register.

Tight and central: sixteen counties through the middle and north of the piedmont, with Davidson, Davie, Rowan and Randolph at the core, Surry and Stokes up on the Virginia line, and Granville and Person to the east. Ten services, appraisal, cruising and sale administration among them, so a stand can be valued, measured and taken to sale. Forest taxation and forest real estate are also recorded — the questions that surface when land and timber change hands at the same time.

Sixteen services is a wide list by the register's standards, and this one stretches from prescribed burning and herbicide application to wetland delineation, logging engineering and forest taxation. Appraisal, cruising and sale administration are all included, so a whole sale can be run in one place. Coverage is sixteen counties centred on Randolph and Guilford in the central piedmont and reaching south through Moore and Scotland into the Sandhills, with ACF and SAF membership recorded and registration 1702 held by Philip M. Mead. The firm's own site fills in the history the register does not carry. Henderson Forestry Consultants says it was founded in 1984 by David C. Henderson, and that in 2021, when Henderson retired, his son-in-law Philip M. Mead took on ownership and operations; the business remains privately owned, is headquartered in Asheboro, and says it serves clients across North Carolina, South Carolina and Virginia. Its published service list runs to forest management plans, timber sales, real estate services, timber inventory and appraisals, GIS and mapping, reforestation, site preparation, timber stand improvement, forestry programmes and certifications, timber tax planning, and property protection, under which prescribed fire, boundary maintenance and fire-line installation sit as answers to trespass, timber theft and wildfire. The firm sets out what one of its management plans contains: landowner goals, stand-by-stand mapping of timber type, age and acreage with hydrology, soils and satellite imagery, current stand conditions, future management areas, a schedule of silvicultural operations, environmental measures, monitoring metrics and cost-share recommendations, and it says its plans satisfy the requirements of the Present-Use Value tax deferral programme. On sales it describes a free initial inspection, an inventory and appraisal setting a minimum acceptable market value, field work and boundary marking, contractor supervision by unannounced inspection, and marketing to vetted timber procurement organisations, drawing on a year-round regional price database. As described on hfcforestry.com, read 23 September 2026.

Membership in the Association of Consulting Foresters is the thing to notice here. ACF takes full-time consultants only, so this is the firm's actual business rather than something done around other work. Thirty-three counties, running from Guilford and Rockingham in the northern piedmont across the Triangle and down through the sandhills into Scotland, Robeson and Pender. Sixteen services, including prescribed burning, forest taxation and urban forestry, and the appraisal, cruise and sale administration set a competitive sale depends on.

Forty-seven counties is wide coverage by any measure — more than double what the median firm on the register carries — and this footprint runs from the Uwharries and the Charlotte-to-Triad piedmont north to the Virginia line and west into Wilkes, Watauga, Ashe and Avery, with a southern arm through the sandhills at Hoke, Scotland and Cumberland. Sixteen services, the complete sale set among them: appraisal, cruise, sale administration. Wetland delineation and urban forestry on the same list is a less common pairing.

Blanton Forestry, PLLC is a one-forester practice in Dobson, Surry County, whose N.C. Forest Service consulting-forester register entry covers 29 counties reaching from the northern mountains through the foothills to the Charlotte suburbs and records nine services: forest management plans and mapping, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, logging engineering, recreation management, forest taxation and wildlife management. The firm describes itself on its own site as a forestry-wildlife consulting business located in Surry County and serving northwest North Carolina and southwest Virginia, and says its mission is to help landowners manage their natural resources to accomplish their goals, which it says can range from managing timber for income to creating better wildlife habitat; it notes that forest management is a long term process and that income from it is usually a once in a lifetime event for most landowners. On services the firm says it provides inventory work for timber buyers, sawmills and other consultants; timber appraisals used to judge the timing of a sale, establish timber basis or value an estate; forest and wildlife management plans, which it notes are also required to qualify for Present Use Evaluation for deferred county property taxes; and timber sales, for which it says it locates the sale boundaries, conducts an appraisal, provides an estimated market value, sends notices to prospective buyers, runs the sale and oversees the harvest. The site publishes a table of its timber sales with acreage and volume for each, showing tracts from a few acres up to parcels of around fifty acres in Surry, Yadkin and Stokes counties and one in Carroll County, Virginia. The firm is owned and operated by Chris Blanton, who the site says holds dual B.S. degrees in fisheries and wildlife management and forest management, graduated in 1998, and has since worked in contract forestry services and consulting forestry; he is a Registered Consulting Forester in North Carolina and, in the firm's words, a candidate member of the ACF. The firm publishes its completed timber sales with the tract size of each, and the smallest of them is the Stroud sale in Surry County at 3.2 acres (65 MBF), so it has demonstrably worked a tract that size; the minimum recorded here is taken from that job rather than from a stated policy, and the firm is welcome to correct it. As described on blantonforestry.com, read 23 September 2026.

Ridgerunner Forestry, LLC is based at Pilot, just over the Virginia line, and the directory records coverage of twenty-six North Carolina counties across the northern piedmont and the northwestern mountains, from Rockingham, Caswell, Person and Granville along the border west through Surry and Wilkes to Ashe, Watauga and Avery. The firm's own site carries the line Since 1988 and says that since its beginning Ridgerunner has strived to provide a variety of professional services to private landowners and industry clients alike, while maintaining high ethical standards with a focus on customer service. It describes its audience as forest landowners in the southeast and beyond, and names timber appraisal and sales, wildlife management and conservation easements among the matters it covers for them. Its own pages add timber cruising, stewardship plans, mapping, the tax implications of forest ownership, and a projects page showing the outcome of recent work. Landowners are invited to call or email with any questions about the management of their forestland. As described on ridgerunnerforestry.com, read 22 September 2026.

A piedmont practice with a long reach east — thirty-one counties from Surry and Stokes on the Virginia line, across the Triad and the Triangle, then out through Johnston and Wayne to Wilson, with Robeson and Cumberland picked up to the south. Logging engineering sits on the service list next to the appraisal, cruise and sale administration a sale runs on, which is the difference between marking a stand and working out how to get equipment onto it. Fourteen services in total. The register lists no association membership and no website.

Yadkin Forestry & Realty has been serving landowners since 1997, and the practice pairs forestry consulting with real estate — the site points visitors to an affiliated brokerage at YadkinRealEstate.com. Its stated objective is to work closely with landowners to protect and promote their interests in forestry and land-related practices, with a consulting forester who stays current on market trends so clients get the best value from their forestry investments. Todd Dowdle is described on the about page as a Registered Forester in both North and South Carolina, a Certified Arborist with the International Society of Arboriculture and a licensed North Carolina Real Estate Broker, holding a bachelor's degree in Forest Resource Management from NC State University along with study in Forest Resources at Penn State University and business management. The firm's own service list runs to timber sales and appraisals, reforestation, acquisition tax basis work, pine thinning, prescribed fire, timberland sales and acquisition, management plans, boundary maintenance, GPS/GIS mapping and real estate sales and acquisition, with further pages on insect control, herbicide and fertiliser, wildlife and recreation, tax incentives and forest economics. On timber sales it describes advertising the sale, securing and evaluating bids, preparing and enforcing contracts, and pre-planning and managing the logging operation, and it frames management planning as aiming at the highest economic return while potentially reducing annual county land taxes. On reforestation it makes an explicit case for genetically improved loblolly: a naturally regenerated hardwood stand typically produces around 50 to 60 mature trees per acre by 60 to 70 years of age, while improved loblolly seedlings can yield 110 to 120 mature sawtimber trees per acre on a 30 to 40 year rotation. Affiliations named on the site are the Association of Consulting Foresters of America, Society of American Foresters as a Certified Forester, the International Society of Arboriculture as a Certified Arborist, the Tree Farm Program as an inspector, and the NC Forestry Association. The register territory is thirty-seven counties across most of the piedmont — Mecklenburg and Wake at either end, Randolph and Davidson in between — climbing into the northwestern mountain counties of Ashe, Alleghany, Avery and Watauga; the firm's own pages describe the practice in terms of North and South Carolina rather than a county list. (source: yadkinforestry.com, read 22 September 2026)

Elkin sits roughly in the middle of this range: a band of twenty counties running from the Triad northwest through Surry and Wilkes into Ashe, Watauga and Avery. That is median reach for the register — half the firms cover fewer. Fifteen services listed, including the full sale sequence of valuing the stand, cruising it and running the sale through to contract, plus herbicide application, wetland delineation and stewardship plans. One registered forester, and no website on file.

The office is in Charlottesville, Virginia, a good way over the state line, but the North Carolina coverage is nothing marginal: 64 counties, wider than 93 percent of firms on the register. That takes in the whole piedmont and coastal plain east of the mountains, from Currituck and Brunswick inland to Surry and Rockingham. Two registered foresters, fifteen services — wetland delineation and environmental impact work sitting alongside the appraisal, cruise and sale-administration set — and ACF membership. The company website is a corporate one and says nothing about any particular North Carolina office or county: it states only that F&W's foresters are located throughout the United States, South America and Europe, and points visitors to a find-your-local-forester map. What it does set out is the firm behind the local contact. F&W says it was founded in 1962 by Eley Frazer and Frank Wetherbee, is headquartered in Albany, Georgia, and manages millions of acres of forestland worldwide; its published timeline runs from regional inventories and forestland appraisals in the 1970s, through growth from 25 employees in two states to 100 in eight states during the 1990s, to expansion into Uruguay and Brazil and the Tree Farm Group certification in the 2000s and the acquisition of Fountains US and UK in 2016. Eight service lines are published — timber sales, property management, field support services for TIMOs and REITs, forest inventory and mapping, forestland accounting, technical and analytical work, real estate, and natural capital. On timber sales specifically the firm describes pre-harvest valuation reporting on species, age and condition, sale layout and marketing to match timber to the best market, then on-site harvest supervision: harvest inspections and reporting, streamside management zone delineation, BMP compliance audits, timber marking, boundary re-marking and road maintenance oversight, with Phase I Environmental Site Assessment available during property transactions. As described on fwforestry.com, read 22 September 2026.

Rudd Forestry, PLLC works out of Raleigh, and the directory records coverage of forty-six counties reaching from the Rockingham and Forsyth line east through the Triangle out to Pitt, Onslow and Pender. The firm says its aim is to help landowners achieve their goals for their forestland, and that it works in North Carolina and Virginia. Its services page describes tailored management plans for forest health and long-term sustainability, timber appraisal covering volume, value and forest health, planning and management of timber sales and harvests, site-specific reforestation, boundary line marking, property security against trespassing, theft and poaching, GIS mapping, hunt lease management, wildlife habitat improvement, forest conservation, outdoor recreation planning, and help buying and selling North Carolina farms and timberland. Owner Thomas Rudd holds a forest management degree from North Carolina State University and states sixteen years as a consulting forester and fourteen as a licensed North Carolina real estate agent, together with arborist certification, a drone certification and standing as a certified tree farm inspector. As described on ruddforestry.com, read 22 September 2026.

Registration number 208 is the fifth-oldest on the state register, a tenure very few listings can match. Thirty-six counties spread across the central piedmont, the Sandhills and the inner coastal plain, from Rockingham and Caswell on the Virginia line down to Scotland and Robeson. Eleven services, a focused list: appraisal, cruise and sale administration, reforestation, timber stand improvement, herbicide application, forest real estate and stewardship plans.

Effectively the eastern two-thirds of the state: sixty-eight counties covering every county on the coastal plain and most of the piedmont, which puts this among the widest-reaching listings on the register. Two registered foresters, the older registration numbered 914. The sale trio is present — appraisal, cruise, contract administration. Surveying is on the service list as well, alongside forest real estate and urban forestry, so a boundary or title question does not need a second firm. On its own site the business trades as Carolina Forestry & Realty, a privately owned professional corporation held by co-owners Keith Brouillard and Rodney Finkbiner and recognised by the N.C. Board of Registration for Foresters as a Professional Forestry Company, working in North Carolina and Virginia and claiming more than 30 years of it. Timber is sold for the landowner on a lump-sum sealed-bid basis, the site saying a sale can draw five to ten bids, after an appraisal done by cruising on larger even stands or by tree count on small or irregular ones. Beyond the sale it lists timberland investment analysis, comprehensive management plans with growth-and-yield and economic projections, pulpwood and residential or development thinnings, disease and pest management, property tax reduction, damage and trespass appraisals and boundary line maintenance. The forestry side sits next to a working rural land brokerage: both owners are licensed brokers and Realtors and the firm publishes its own listings, so a landowner deciding between selling timber and selling the tract can put both questions to the same office. As described on carolinaforestry.com, read 22 September 2026.

Seven registered foresters is the top of the range on the state register, and it comes attached to eighty-four counties — mountains to the Outer Banks, with very little of North Carolina out of reach. Scale like that means a landowner isn't waiting on one person's calendar, and it means the firm doesn't vanish when someone retires. Nineteen services: wetland delineation, environmental impact statements, forest taxation and urban forestry, alongside the appraisal, cruise and sale-administration combination a competitive timber sale actually runs on. ACF and SAF. The firm trades as GFR Forestry Consultants and dates itself to 1964, and it works from four North Carolina offices — Raleigh, Lillington, Tarboro and Lake Waccamaw — with its published service area running beyond the state line into South Carolina, Virginia, Maryland and the Eastern Shore. Its own account of a timber sale runs from stand assessment through a sale announcement and marketing plan to bid management, handled by foresters it says keep current on local buyers, pricing and competition; on the management side it names timber inventory and valuation, timber trespass analysis, forest management planning, GIS mapping, boundary line location and maintenance, pulpwood thinning, pest and disease control, fire protection measures and hunt and lease management. Two services sit outside the usual consulting list: timber basis determination and tax planning for estates and long-held family land, and wood flow and logistics work for landowners or businesses moving product to buyers. It also runs a rural real estate side, brokering timberland, hunting and agricultural tracts through licensed N.C. brokers. As described on gfrforestry.com, read 22 September 2026.

Every county in North Carolina is listed against this firm — all 100 — which puts it in the small group on the register that will work anywhere in the state. The service list is narrow by comparison: ten entries, built tight around the sale itself, with appraisal, cruising and sale and contract administration at the middle and forest taxation, utilization and marketing, urban forestry and stewardship plans around them. Both ACF and SAF memberships are recorded. One registered forester covers that ground, which is worth knowing when you're arranging a visit.

The northern mountains around Ashe, Watauga and Avery, down through the foothills at Burke and Caldwell, then east across the western piedmont to Mecklenburg, Guilford and Rockingham — thirty-four counties in all. Registration 546 is the twenty-fourth oldest of 178, a long time on the state register. Fourteen services, appraisal and cruising and sale administration among them, with forest taxation and forest real estate for the landowner weighing a sale against holding on. ACF and SAF. Jeff Pardue has consulted in Wilkesboro since 1982 and incorporated the business as Forestland Consultants, Inc. in 1996; he is a Fellow of the Society of American Foresters, a past president of the N.C. Society of Consulting Foresters and a licensed N.C. real estate broker, and a second registered forester, Will Beauchamp, joined in 2023 alongside an office manager who has been there since 1992. The firm describes its clients as private, non-industrial owners holding anywhere from five acres to five thousand or more, and its own published harvest list bears that range out at the small end: ongoing and past jobs run from nine acres in Wilkes and in Ashe up to 145 in Alleghany, spread across Wilkes, Yadkin, Iredell, Ashe, Alexander, Alleghany, Burke and Avery counties. It sells timber as the landowner's broker by announced auction, with sale dates and tract sizes posted openly on the site, and adds logging road design, herbicide contracting, pre-commercial thinning, cost-share guidance, hunt lease management, forest mapping and expert witness work to the register's list. Written management plans are offered partly to qualify land for North Carolina's Use Value Assessment programme, which cuts the property tax on forestland. On tract size the firm states that most of its clients “own as little as 5 acres to as much as 5,000 acres or more”, and its published sale list includes jobs of 9 and 10 acres, so five acres is the smallest holding it says it works with. As described on forestlandconsultants.com, read 22 September 2026.

Two registered foresters, and the older of the two registrations sits twenty-ninth of 178 on the state register — near the front of the line. Coverage takes in the western piedmont and foothills and reaches up into Ashe, Avery and Watauga. Alongside appraisal, cruise and sale administration, the firm lists surveying, wetland delineation and environmental impact statements. That is an unusual pairing: the same visit that measures the timber can settle a boundary line or flag a wet corner before it stalls the harvest. ACF membership means consulting is the business, not a sideline.

Evergreen Forest Management is Daron Brown, a North Carolina registered forester based at Millers Creek in Wilkes County, and the register puts him across thirty-five counties, from Ashe and Watauga down through Burke and Catawba to Guilford and Rockingham. His own account is more specific. He writes that his career began in 1989 in eastern North Carolina as a procurement forester for a wood dealership and sawmill, and that after ten years buying timber and managing loggers he moved back to Wilkes County and opened Evergreen in 2000. Since then, he says, he has served clients in northwestern North Carolina and southwestern Virginia, most of the work being timber sales and appraisals intermixed with stewardship and management plans; the home page also announces services for all of northeast Tennessee. The site describes a practice specialising in timber sales for private landowners, with management and present-use tax plans, stewardship plans, forest inventory and mapping, wildlife management, reforestation, thinnings, prescribed burns, hunting lease management, insect and disease control and invasive vegetation control alongside. The timber sale contract is set out step by step: marking property lines and securing a surveyor if they cannot be found, a full appraisal of acreage, species, size, volume and market value, advertising the timber and overseeing bidding or negotiation, handling timber deeds and cutting contracts, supervising the harvest for compliance, and a closing inspection against state environmental rules — which, the site notes, can otherwise leave a landowner fined for a logging contractor's violations. Appraisals are offered for estate divisions, financial planning, tax baselines and loan collateral, and come as a written valuation broken down by species, stand, diameter, height and board foot. Brown states he is a member of the Society of American Foresters, licensed and insured for controlled burns and an N.C. licensed forest pesticide and herbicide applicator, and that the firm finds state and federal cost-share funding for clients and files the applications on their behalf. He also sells real estate through Realty One Group Results. As described on evergreenforestry.com, read 23 September 2026.

Registration 392 is the tenth-oldest entry on the North Carolina register, about as long a tenure as this directory contains. Coverage runs seventy counties — the entire mountain west, the whole piedmont, and down through the sandhills to the southeastern coast, stopping short only of the northeastern corner. Thirteen services, including appraisal, cruising and sale administration, plus forest taxation, forest real estate and prescribed burning. For a landowner whose sale is tangled up with an estate or a tax question, that last combination is the point.

Registration number 335 puts this firm's oldest credential ninth-oldest of the 178 registrations on the state register — one of the longest tenures in North Carolina consulting forestry. Two registered foresters, twenty-seven counties covering the southern and central piedmont from Mecklenburg and Gaston up through the Triad, with the Sandhills along the bottom edge. Seventeen services: urban forestry, forest taxation and environmental impact statements on top of the appraisal, cruise and sale-administration trio. Memberships in ACF, SAF, the N.C. Forestry Association and the Forest Landowners Association — an unusually deep set.

Alliance Forestry, Inc. is a forestry consulting business based in Dallas, North Carolina. The Dallas office, led by Brian Medlock, covers Western NC, SC, and VA. The company also has a branch in Tarboro, North Carolina, run by Mike Wittig, covering Eastern NC, SC, and VA. On the consulting side, the work includes timber sales, appraisals, inventories, forest management plans including Forest Stewardship plans, boundary line maintenance, and forest taxation assistance. The staff includes NC Registered Foresters, and the business holds N.C. Registered Forester #1124. They also do land clearing and site work, custom herbicide applications for utility companies managing rights-of-way, and forestry herbicide work by aerial, ground, and backpack methods, as licensed pesticide applicators in NC, SC, and VA. On the planting side, they put in over a million seedlings a year, including loblolly pine, longleaf pine, and a variety of hardwood species, with guidance on genetics, planting density, and seedling type. Mapping is handled through GIS and GPS work, and "Acreage determinations can be made in the office or the field." Wildlife management services cover food plots, prescribed burning, and removal of nuisance animals including beavers. This suits a landowner who wants one outfit that can run a timber sale, handle the paperwork and mapping, and also come back later for planting or herbicide work, rather than hiring out each piece separately. From allianceforestry.com, read 10 October 2026.

All one hundred counties — one of the few listings on the register that covers the entire state. The registration here is number 8, the second-oldest of the 178 registrations on the register, which is about as long a tenure as North Carolina forestry has to offer. Beyond the sale work of appraisal, cruise and contract administration, this firm surveys, so a boundary question and a timber cruise can be settled on the same visit. Christmas tree management, wetland delineation and environmental impact statements are also listed.

The office is over the state line in Rock Hill, South Carolina, but the coverage is anything but local — 48 North Carolina counties, from Union and Mecklenburg up through the Triad and out west as far as Madison, Mitchell and Yancey. Appraisal, cruising and sale administration are all recorded, the set needed to run a competitive sale end to end. ACF membership marks this as full-time consulting work. Twelve services in total; no website on the register.

Fifty-nine counties from a one-forester office in Beulaville — effectively the whole coastal plain, from the Currituck and Dare marshes south to Brunswick, plus a long reach west through the Triad into Surry and Yadkin. Eighteen services puts this firm near the top of the register for breadth, and two of them are worth noticing: wetland delineation and environmental impact statements, which matter if the tract has bottomland or a permitting question attached to it. Valuation, cruising and sale administration are all covered. No website is listed.

Land, Farms & Timber, Inc. is based in Lake Waccamaw, North Carolina, and is listed as a forestry consultant, also doing timberland brokerage. Its register entry lists forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimate, timber sale and contract administration, prescribed burning, forest real estate, recreation management, and utilization and marketing. It states N.C. Registered Forester #586. It serves a long list of North Carolina counties, including Bladen, Columbus, Robeson, Sampson, Duplin, Cumberland, Johnston, Moore, Richmond, Scotland, Stanly, Union, Anson, Montgomery, Chatham, Lee, Harnett, Hoke, Rockingham, Alexander, Alleghany, Ashe, Avery, Burke, Caldwell, Watauga, Wilkes, Beaufort, Carteret, Craven, Dare, Hyde, Jones, Lenoir, New Hanover, Onslow, Pamlico, Pender, Pitt, Tyrrell, and Washington. This fits a landowner in eastern or western North Carolina who wants someone offering both forestry consulting work, such as a timber cruise or a management plan, and help selling forest real estate, under one listing. From advancelandandtimber.com, read 10 October 2026.

Wildwood Consulting, PLLC is a forestry consulting outfit based in Asheville, North Carolina. They work for the landowner, not the mill or the logger, helping with forest management plans, timber inventory and appraisal, timber basis work for tax purposes, timber sales and harvest oversight, silvicultural treatments, and urban forestry. Two of their staff are N.C. Registered Foresters. Beyond those core jobs, their broader services list runs to timber cruises, reforestation, timber stand improvement, prescribed burning, forest real estate, recreation management, wetland delineation, and wildlife management, among others. They cover a wide stretch of western North Carolina and a long list of counties, from Alexander and Ashe down through Henderson and Transylvania to Yancey, plus work in east Tennessee, the upstate of South Carolina, and southwestern Virginia. There's no stated minimum acreage, but the smallest job they describe is a 109 acre controlled burn at Green River Preserve, so that gives a sense of the scale they're used to working at. Their own words put the point plainly: they aim to "know the value of your assets before you make a decision" and to "get the best price for your timber and the best value out of any harvest activity." This fits a landowner with a sizable tract, especially one in or near the western Carolina mountains, who wants a forester handling the planning and the sale, not just a logger showing up with a truck. From wildwood-consulting.com, read 10 October 2026.

Registration 513 sits seventeenth-oldest on the state register, and the firm holds Association of Consulting Foresters membership — ACF admits full-time consultants only, so it signals this is the business rather than a sideline. The office is in Blythewood, South Carolina, but the NC Forest Service register credits sixty-two North Carolina counties: the mountains, effectively the whole piedmont, the sandhills and the southeastern coast. Fourteen services, with appraisal, cruising and sale administration at the center and forest taxation, forest real estate and stewardship planning around them.

Milliken Advisors Inc. is a forestry consulting and timberland brokerage business in Columbia, North Carolina. It works with landowners on the kind of jobs that come with owning timberland, from planning a sale to planting trees back after a harvest. The work on offer covers forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, insect, disease and fire protection, prescribed burning, forest real estate, recreation management, forest taxation, utilization and marketing, herbicide application, and stewardship plans. The forester holds N.C. Registered Forester credential #1394. Milliken Advisors serves landowners across a long list of North Carolina counties, among them Wake, Mecklenburg, Guilford, Buncombe, and Dare. The business has been working with landowners since 1949. Its own description of how a job runs is plain: "Once we know what you want, we take a good look at your land: its current state, what's happening in the market, and what the future could hold. Then we build a strategy that actually fits your needs." On follow-through, it says "You don't have to worry about juggling contractors or chasing down deadlines." This fits a landowner who wants one firm to handle a timber sale or a management plan from start to finish, rather than piecing the work together themselves. From millikenadvisors.com, read 10 October 2026.

Statewide coverage — all 100 North Carolina counties — from an office in Gainesville, Georgia. Fifteen services are recorded, including the three that make a timber sale work: appraisal, cruising, and sale and contract administration. Prescribed burning, herbicide application, urban forestry and stewardship plans fill out the rest. The register carries this entry under the name US Forest Service, with one N.C. Registered Forester and no website given.

This entry is unusual: a national conservation organization holding a North Carolina registration, with the office on file in Indianapolis, Indiana, and twenty-five counties listed across the western piedmont and the northwestern mountains. The service list is short and specific — management plans, stand improvement, forest real estate, stewardship plans, and all three timber-sale services from appraisal through to sale administration. Both ACF and SAF memberships are recorded. Seven services is among the narrowest on the register, so anything outside that set would have to come from elsewhere.

The N.C. Forest Service register carries Dougherty & Dougherty across sixty-three North Carolina counties, foothills through piedmont to coastal plain — but the firm is run from Georgia. The register address is a PO box in Athens, Georgia, and the North Carolina connection is Derek Dougherty's registration, number 1029, rather than a North Carolina office. Trading as Progressive Forestry, the firm's site states that it “manages forest land for private forest landowners in the Southeastern US” with staff it describes as “college-educated, field-trained, and licensed forestry professionals,” and says its experience spans forest management, real estate investment, research and tree breeding. Its timberland management page sets the services out in detail: property and annual inspections, timber inventory reported in tons, cords or thousand board feet by species and product class, timber appraisal, boundary line marking, prescribed understory burning, plantation establishment, seed source selection, mid-rotation work, GIS mapping, growth and yield modelling, harvest scheduling and forest investment analysis. It also answers a question the register leaves open. The register credits the firm with appraisal and cruising but not with sale administration; the site says the firm prepares and oversees the marketing and harvest itself, by negotiation or sealed bid, with lump-sum or per-unit payment and clear-cut, select-cut or thinning harvests, including logging inspections and its own timber security and tracking system. The firm states it is a certified Forest Stewardship Program plan writer in North Carolina. Hardwood is treated as a speciality: the site argues the South's hardwood resource sits “well below its potential” after a history of high-grading, and describes a system of site and stand evaluation aimed at regular production of grade hardwood. Species named across the site include loblolly, longleaf and slash pine, green ash, yellow poplar and eucalyptus. A consultation line covers audits, seedling advice and expert witness work on timber trespass overcuts and failed plantations. No founding year is published. As described on progressiveforestry.com, read 23 September 2026.

Peachland is the mill that takes what other yards turn away - gum, hickory, elm, hackberry and sycamore - cutting soft hardwoods into industrial timbers, cross ties and switch ties at a reported 16,000 to 18,000 board feet an hour. Edwards acquired the site in 2012; the parent company started in 1969 out of a dirt-floor chicken house in Marshville and now runs six North Carolina locations along with its own timber company and trucking arm. It is second-generation family owned and FSC certified company-wide. The NC Forest Service's Anson County register lists the Peachland mill as buying standing timber, hardwood grade logs, miscellaneous hardwood sawlogs and pine sawlogs, so a landowner sitting on a mixed, low-grade hardwood stand has a genuine outlet here.

Hunt Forest Resources, LLC is a timber buyer based in Moncure, North Carolina, with forestry consulting, firewood, and wood recycling run alongside it. They buy stumpage, sawlogs, pulpwood, and chip-n-saw timber in pine and hardwood, and they also handle forest management plans and mapping, timber cruise and volume estimates, timber appraisal, timber sale and contract administration, reforestation, timber stand improvement, prescribed burning, herbicide application, insect and fire protection, and wildlife and recreation management. Their registered forester holds N.C. Registered Forester #1438, and the company carries ProLogger and American Tree Farm System (ATFS) standing. They work across a long list of North Carolina counties, from Alamance, Durham, and Wake, through Chatham and Moore, down to Brunswick and New Hanover, and out east to Dare, Hyde, and Beaufort, along with many others. On their own pages they describe offering "a diverse range of services that span the entire lifecycle of forest products, from land and timber management to sustainable harvesting, real estate services, wood products manufacturing and beyond," and say they manage "7,000 acres of timberland annually" across four facilities in the state. This suits a landowner who wants one outfit that can buy the timber, write the management plan, and keep an eye on the ground afterward, rather than stitching together a buyer, a consultant, and a logger separately. From huntforestry.com, read 10 October 2026.

Piedmont Timber - Full Service Timber Company is a logging contractor in Greensboro, North Carolina. It has a Google Maps business listing in that category. It is also listed as a timber buyer and a consulting forester. A listing here is not an endorsement.

Behind the PO Box mailing address is a working mill. The Forest Products Locator and an OSHA inspection record independently place Blue Ox at 190 Sawmill Road in Stoneville and classify it as an operating sawmill (NAICS 321113) cutting both softwood and hardwood. Its buying list is wider than most Piedmont mills — the NC Forest Service register adds sweetgum, black and tupelo gum, beech and ash to the usual oaks, poplar and pine, which matters on a mixed tract where odd-species stems otherwise get left standing. It buys in Stokes County as well as Rockingham. The only regulatory history found is a planned OSHA safety inspection opened in July 2013 and closed that September with one serious and six other violations, settled informally for $325.

Draper sawmill and lumber is a mill in Eden, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

A Stoneville timber buyer that appears on both the Rockingham and Stokes county NC Forest Service buyer registers. The register records it as buying all hardwood and all softwood species as standing timber, sawlogs, pulpwood and chips — broader than the mixed-hardwood entry this listing was originally built from. Beyond the state register, searches found no website, no Facebook page, no reviews and no NC Secretary of State corporate record under this name.

Sawmilling in Stoneville since 1958, according to the business-data aggregator Buzzfile — long enough that the county road it sits on, Fulp Sawmill Road, carries its name. The Forest Products Locator lists it as an operating sawmill handling both softwood and hardwood, and it holds a USDA APHIS-PPQ compliance agreement allowing it to receive logs from Canadian areas under gypsy moth quarantine, one of only 52 North Carolina facilities on that federal list. It runs its own log trucks as a private interstate motor carrier under USDOT 969828, with five power units and four drivers on the September 2025 MCS-150 filing. One caveat for a landowner selling standing timber: Fulp does not appear on the NC Forest Service Rockingham or Stokes county buyer registers, so it is worth confirming whether it buys stumpage or only delivered logs.

Two trucks and two drivers is what the federal motor carrier register shows for this outfit as of its October 2024 MCS-150 filing under USDOT 3349173 — a small crew that hauls its own wood rather than subcontracting it out. It buys standing timber, sawlogs and pulpwood in all hardwood and softwood species, and appears on the Stokes County buyer register as well as Rockingham's. Worth knowing if you are calling around: its yard on Anglin Mill Road sits roughly a mile from Shelton Logging & Chipping at 2861 Anglin Mill Road, two separately incorporated Shelton logging businesses on the same road. FMCSA also carries a second number for the business, (336) 573-9551. No website, Facebook page or published reviews were found.

Home Lumber Co is a mill in Eden, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

NC Forest Service Rockingham County is a timber buyer in Reidsville, North Carolina. It has a Google Maps business listing in that category. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Pine State Group, Inc. is a timber buyer in Eden, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Chips. It covers 7 counties, including Alamance, Caswell, Forsyth and Guilford. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

This is one of the larger owner-operated crews in the Stoneville cluster: seven power units and seven drivers on its December 2024 federal motor carrier filing under USDOT 2351429, meaning it can move a tract without waiting on subcontracted hauling. The Anglin Mill Road address is a mailing address — FMCSA records the physical operating base as 200 Price Farm Road in Stokesdale, about 25 miles south in Guilford County, so its working range covers both counties. It also appears on the NC Forest Service Rockingham County buyer register as buying standing timber, sawlogs and pulpwood in all hardwood and softwood species, so it will buy the wood as well as cut it. FMCSA lists a second phone number, (336) 548-3860, alongside the one on the register.

Incorporated in October 1997 and still listed Current-Active with the NC Secretary of State, Stoneville Lumber holds something no other buyer in the Stoneville cluster does: a USDA APHIS-PPQ compliance agreement authorising it to receive logs from Canadian areas under gypsy moth quarantine, one of only 52 North Carolina facilities on that federal list. Its product range on the NC Forest Service register is the broadest around — standing timber, sawlogs, chip-n-saw, pulpwood, veneer and plywood logs, sawdust, chips and finished lumber — covering both what comes off a tract and what comes out of a mill. It is also one of the few Piedmont buyers that lists black walnut and cherry, two high-value specialty hardwoods most of its neighbours do not name. No website, Facebook page or published reviews were found.

Thomas Carter Logging is a timber buyer in Reidsville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 7 counties, including Alamance, Caswell, Forsyth and Guilford. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Triple N Lumber Co., LLC is a timber buyer in Eden, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Sawlogs, Standing Timber, Pulpwood and Chips. It covers 7 counties, including Alamance, Caswell, Forsyth and Guilford. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Wilson Logging is a logging contractor in Ruffin, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

All-Woods Timber Company, Inc. is a timber buyer in Hurdle Mills, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine and All Hardwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 12 counties, including Alamance, Caswell, Chatham and Durham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Appalachian Walnut Co. LLC is a sawmill and timber buyer in Lincolnton, North Carolina. They buy standing timber and logs, and they sell lumber, both green and kiln dried. They're looking for mature walnut and white oak, specifically. On the timber side, they buy standing tracts of hardwood where those species are present. They also buy walnut and white oak logs directly, and say they do this "in a 250 mile radius of our mill," so they reach well past Lincoln County if the wood is right. On the lumber side, they sell both retail and wholesale, green or kiln dried, and can ship it out LTL, even internationally, or you can pick it up yourself. There's no stated minimum acreage or tract size here, so if you've got a smaller property with a good stand of walnut or white oak on it, it may still be worth a call. Their own words say they "buy and select harvest logs and focus on quality not quantity when we manufacture lumber," which tells you they're picky about what they take rather than looking to clear everything. This fits a landowner who has walnut or white oak worth something, maybe just a pocket of good trees rather than a whole tract, and wants a buyer who deals in those species specifically rather than general logging. From appalachianwalnut.com, read 10 October 2026.

Bowling Logging and Chipping is a timber buyer based in Ridgeway, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood, Clean Chips and Fuel Chips. It covers 9 counties, including Alamance, Caswell, Davidson and Davie. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Canal Wood, LLC - Laurinburg is a timber buyer in Laurinburg, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber. It covers 18 counties, including Anson, Catawba, Chatham and Cleveland. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Charles W. Brinegar is a timber buyer based in Spencer, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and S Yellow Pine. Products: Standing Timber, Sawlogs and Pulpwood. It covers Rockingham and Stokes counties. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Claybourn Walters Logging Co is a logging contractor in Fairmont, North Carolina. It has a Google Maps business listing in that category. It is also listed as a timber buyer. A listing here is not an endorsement.

East Coast Timberland Inc. is a timber buyer in Nashville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Chips. It covers 40 counties, including Beaufort, Bertie, Carteret and Chatham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Felts Land & Timber, LLC is a timber buyer in Pinnacle, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 5 counties, including Forsyth, Rockingham, Stokes and Surry. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Gregory Pallet Co., LLC is a timber buyer in Elon, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Chip-N-Saw Logs, Ply or Veneer Logs, Pulpwood, Poles and Lumber. It covers 13 counties, including Alamance, Caswell, Chatham and Davidson. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

H W Culp Lumber Co is a sawmill in New London, North Carolina. The family has run it since 1925, now in its third generation, cutting Southern Yellow Pine Lumber for wholesale customers. This is a mill, not a logging crew that comes out to walk your land. Logs are delivered to the New London site, where they're debarked, sawed, dried, and planed. Besides lumber, the mill turns out wood chips, sawdust, and bark as by-products. The company also handles wood procurement and trucking. Its lumber is heat treated and produced under TPI (Timber Products Inspection) certification, so it carries that grade guarantee: "Our products are certified by Timber Products Inspection to ensure our customers receive the grade quality they expect." Stanly County is named as an area served. This is a long-standing operation, sawing pine lumber "SINCE 1925," and it's a sizeable one, running a single-shift mill and producing a large volume of pine lumber a year for shipment to northern and western markets. For a landowner with Southern Yellow Pine to sell, H W Culp Lumber Co is worth knowing as a mill with deep roots in New London and a certification that backs up the grade of lumber it cuts, though it's set up to deal in wood procurement and volume rather than walking a small tract with you. From culplumber.com, read 10 October 2026.

The NC Forest Service timber buyers register is the only record that could be found for this company. It lists stumpage purchase and timber cruising across eleven counties in the central Piedmont, with a five-acre minimum tract — a smaller floor than some buyers will consider. Repeated searches turned up no website, no Facebook page, no directory profile, no reviews and no founding date, so nothing beyond the register entry has been independently confirmed.

Hopkins Lumber Contractors is a timber buyer based in Stuart, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine, E White Pine, Ash, Basswood, Beech, Black Gum, Black Locust and Cherry. Products: Standing Timber, Sawlogs, Pulpwood and Sawdust. It covers 7 counties, including Caswell, Forsyth, Guilford and Person. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Hopkins Lumber Contractors is a timber business based in Ridgeway, North Carolina. It is listed under timber buyers, and the products it lists are standing timber, sawlogs, pulpwood and sawdust. That covers trees still standing in the woods, the larger logs a sawmill cuts into boards, and the smaller wood that goes to pulp. The species it handles are southern yellow pine, eastern white pine, ash, basswood, beech, black gum, black locust, cherry, hickory, soft maple, red oak, white oak, sweetgum, walnut and yellow poplar. The counties it serves are Caswell, Forsyth, Guilford, Person, Rockingham, Stokes and Surry. It suits a landowner in one of those seven counties who has walnut, cherry, white oak or yellow poplar standing and wants one business to take the sawlogs, pulpwood and sawdust along with the standing trees. From hopkinslumber.com, read 17 October 2026.

Independent Timber Co is a timber buyer based in Dry Fork, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine, Yellow Poplar, Sweetgum, Soft Maple, Black/Tupelo Gum, Red Oak, White Oak and Hickory. Products: Standing Timber, Sawlogs, Chip-N-Saw Logs, Ply or Veneer Logs, Pulpwood and Poles. It covers 7 counties, including Alamance, Caswell, Granville and Guilford. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Lumber River Timber Co Inc is a logging contractor in Lumberton, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

McDowell Lumber & Pallet Co., Inc. is a sawmill and pallet manufacturer in Asheboro, North Carolina. Alongside running the mill, they buy standing timber, logs, and land, so a landowner can go straight to the people who will actually mill the wood. They work in hardwoods: red oak, white oak, poplar, hickory, gum, ash, sycamore, maple, beech, and mixed hardwoods. Beyond buying timber, their listed work covers timber purchasing and evaluation, forest management planning, logging assistance, reforestation, land management consultation, hardwood sawmilling, kiln drying, surfacing and planing, custom pallet design, heat treating for export, and their own trucking. They describe themselves plainly as a company that will "buy land, timber, and logs," and they also sell mulch, chips, and sawdust locally by the full trailer load. They serve Randolph, Chatham, Davidson, Davie, Montgomery, Forsyth, Iredell, Rowan, Guilford, Rockingham, and Mecklenburg counties. The company traces back to 1974, when Tony McDowell started out scouting timber with "a lumberjack's eye," and it has grown from that single portable saw into a mill that now ships lumber well beyond the Carolinas. This fits a landowner in that stretch of central North Carolina who wants to deal with a mill that buys its own timber and logs, rather than a broker standing between the woods and the saw. From mcdowelllumberco.com, read 10 October 2026.

North Star Grading & Logging is a logging contractor in Stokesdale, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Ridge Road Wood Products, Inc. is a timber buyer in Boone, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 6 counties, including Forsyth, Rockingham, Stokes and Surry. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

S & H Lumber Co is a mill in Walnut Cove, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Shelton Logging & Chipping Inc is a logging contractor in Stokesdale, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Southern Veneer Specialty is a timber buyer in Moncure, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Ply or Veneer Logs. It covers 48 counties, including Alamance, Anson, Beaufort and Bertie. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Stewart's Forest Services, Inc. is a timber buyer in Germantown, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 99 counties, including Alamance, Alexander, Alleghany and Anson. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Stone Timber Products, Inc. is a timber buyer in Sims, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 41 counties, including Alamance, Anson, Caswell and Chatham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

T & L Development, LLC is a timber buyer based in Stuart, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine, E White Pine, Hemlock, Ash, Basswood, Beech, Black Gum and Black Locust. Products: Standing Timber and Sawlogs. It covers 7 counties, including Caldwell, Forsyth, Guilford and Person. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Thurman Timber LLC is a timber buyer based in Spencer. The business buys and cuts standing timber, and it also does logging, forest management, pine thinning, hardwood management and reforestation. It buys southern yellow pine and all hardwoods. The counties it serves are Caswell, Guilford, Rockingham and Stokes, and it operates in Central NC and Southside VA. Tim Thurman owns and runs the company, which has been in business since 2004. He has more than 30 years of experience as a registered forester. Matt Thurman, who spent 7 years with the Virginia Department of Forestry, monitors harvests and cruises timber. The company offers free appraisals for lump sum sales and per unit sales. It can also help with forest management plans and timber tax basis, and it buys timberland. The minimum is 20 acres. It uses modern equipment to reduce harvest waste, and its aim is to give owners "top financial return for their timber," along with a professional logging job and protection of the land and water. Thurman Timber LLC suits a landowner with at least 20 acres of pine or hardwood in Central NC, Southside VA, or the four counties named above, who wants a free appraisal before choosing between a lump sum and a per unit sale. From thurmantimber.com, read 17 October 2026.

Timbco, LLC is a timber procurement company based in Morrisville, North Carolina. It operates throughout Central North Carolina, Southside Virginia, and the Sandhills of North Carolina, buying standing timber and arranging the harvest. Its work covers clear cutting, first and second thinning of pine plantations, shelter-wood harvests, wildlife habitat enhancement, development harvests, and reforestation or replanting. Its product list runs from standing timber to sawlogs, chip-n-saw, pulpwood, ply or veneer logs, and poles, in both hardwoods and softwoods. The minimum is 15 acres of harvestable timber, because the equipment is large and costly to move. A visit to look at your timber is free for tracts of 15 acres or more, and you are under no obligation to sell. Timbco, LLC prefers 24 month contracts, which allow flexibility in scheduling harvests if ground or market conditions turn adverse. Each logging contractor it uses carries Workers Compensation and General Liability Insurance, which the company requires before anyone harvests for it. Phillip Smith is an NC Registered Forester. Founders Jason Wallace and Phillip Smith have over 40 years of combined experience in the North Carolina and Virginia timber industry, and the firm belongs to the North Carolina and Virginia Forestry Associations. It has offices in Morrisville, South Boston, Rocky Mount, and Greensboro. Its approach is "hands on" from the first landowner meeting through reforestation. Timbco, LLC suits a landowner with at least 15 acres of harvestable timber in Central North Carolina, Southside Virginia, or the Sandhills who wants a forester involved from the first visit through replanting. From timbcollc.com, read 10 October 2026.

Tram Lumber Llc is a mill in Asheboro, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Tri-State Land & Timber, LLC is a timber buyer in Pelham, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber. It covers 6 counties, including Alamance, Caswell, Durham and Orange. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Triangle East Timber Co Inc is a logging contractor in Mt Olive, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Uwharrie Lumber Co. is a timber buyer and mill based in Troy, North Carolina. They buy stumpage, sawlogs, and pulpwood, and they run a hardwood sawmill too, so they can take wood from standing timber through to sawn lumber. They work with Red Oak, White Oak, Yellow-Poplar, Hickory, and Mixed Hardwoods. They serve a wide stretch of counties: Alamance, Anson, Cabarrus, Caswell, Chatham, Cleveland, Cumberland, Davidson, Davie, Durham, and Forsyth. There's no stated minimum acreage, and no clear word on how small a job they'll take on, so if you're sitting on a small lot it's worth a call to ask directly rather than guessing. This fits a landowner in or near that stretch of counties who has hardwood timber to sell, whether standing or cut, and wants someone who both buys logs and mills them. From uwharrielumber.com, read 10 October 2026.

W.E.F. Logging is a timber buyer in Winston Salem, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 10 counties, including Davidson, Davie, Forsyth and Guilford. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

WestRock - Florence, SC is a timber buyer based in Florence, South Carolina, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: S Yellow Pine. Products: Standing Timber and Pulpwood. It covers 21 counties, including Anson, Bladen, Brunswick and Chatham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

WestRock Cascade Chip Mill is a timber buyer in Cascade, North Carolina. It buys standing timber, which means trees bought while they are still growing, and pulpwood, which is smaller wood cut to make pulp. It takes both hardwoods and softwoods, so a landowner with either kind of tree has a place to sell. Its work is in Caswell, Rockingham, and Stokes counties. A landowner in any of those three counties is in the area it serves. Standing timber and pulpwood are two different products, so know which one your trees are before you talk to any buyer. WestRock Cascade Chip Mill suits a landowner in Caswell, Rockingham, or Stokes county who has standing timber or pulpwood to sell, whether the trees are hardwood or softwood. From westrock.com, read 17 October 2026.

Wilderness-Stuart Inc is a timber buyer based in Stuart, Virginia, serving North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods. Products: Standing Timber and Sawlogs. It covers 5 counties, including Alamance, Caswell, Guilford and Rockingham. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Wood Forest Resources, LLC is a timber buyer in Wilson, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: Southern Yellow Pine, Ash, Red Oak, White Oak, Hickory, Sweetgum and Yellow Poplar. Products: Standing Timber, Sawlogs and Pulpwood. It covers 69 counties, including Alamance, Anson, Beaufort and Bertie. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.