Selling Timber in Iredell County, NC

Registration 392 is the tenth-oldest entry on the North Carolina register, about as long a tenure as this directory contains. Coverage runs seventy counties — the entire mountain west, the whole piedmont, and down through the sandhills to the southeastern coast, stopping short only of the northeastern corner. Thirteen services, including appraisal, cruising and sale administration, plus forest taxation, forest real estate and prescribed burning. For a landowner whose sale is tangled up with an estate or a tax question, that last combination is the point.

Taylor Forestry is an independent consulting firm at Hickory, and the directory records coverage of thirty-three counties across the western third of North Carolina, from the Charlotte-area piedmont and the foothills up into Watauga, Ashe, Avery and Mitchell. The firm says it manages woodlands and markets forest products for landowners, helping them realize their goals through the application of sound forest management practices. Ray Taylor, a graduate of the School of Forestry at NC State University, founded the business in 1992 after working as a procurement forester and later as an assistant district forester for the NC Forest Service, and practises as a registered forester in North Carolina, South Carolina and Virginia. The site sets out its timber sale work step by step, from a free initial onsite consultation and the setting of landowner goals including income tax impact, through harvest planning, sale boundaries, inventory and appraisal, marketing to buyers, a sealed bid or negotiated sale, closing, monitoring of logging and coordination of reforestation. Forest management work covers property tax reduction plans, timber inventory, hardwood and pine management, reforestation, boundary line maintenance, wildlife and recreational management, and the NC Landowner Protection Act. As described on taylorforestrync.com, read 22 September 2026.

Casey & Company Forestry, PLLC works from 310 E. Main Street in Wilkesboro across the twenty-seven counties on its register entry, reaching from the northwestern mountains and foothills down to Wake, Johnston and the Sandhills, and the project's own research record of the firm's home page notes a stated reach into North Carolina and Virginia. The framing on that home page is about making land work for its owner: exploring options for creating income from land, reducing the taxes paid on it, selling it, or finding land to buy for investment. As North Carolina Registered Foresters, the page says, the firm knows land and timber and manages tens of thousands of acres for private forestland owners, and it offers custom mapping that helps prospective buyers find a property and see its most attractive features. The services page sets out forestry management covering forest taxation, crop tree release thinning, herbicide release assistance, forest maintenance, forest health issues, reforestation assistance, Tree Farm and hunting leases; timber appraisals estimating what standing timber is worth at present market conditions; inventories gathering forest types, timber volumes, tree quality and health, age, size, growth rates and site quality; comprehensive timber sales in which the firm handles every aspect on the owner's behalf while maintaining the environmental integrity of the land; and mapping with affordable site assessments. Real estate is a genuine second arm rather than a sideline, specialising in forestland, rural homesites and local commercial properties, and the site argues that most traditional brokers, used to selling houses, have no idea about the timber value standing on a tract. The published timber sales page shows the scale of tract handled, a sold 53.3-acre Wilkes County sale carrying 720.5 Mbf, about 13.5 Mbf to the acre. As described on caseyandcompany.com, read 23 September 2026.

The northern mountains around Ashe, Watauga and Avery, down through the foothills at Burke and Caldwell, then east across the western piedmont to Mecklenburg, Guilford and Rockingham — thirty-four counties in all. Registration 546 is the twenty-fourth oldest of 178, a long time on the state register. Fourteen services, appraisal and cruising and sale administration among them, with forest taxation and forest real estate for the landowner weighing a sale against holding on. ACF and SAF. Jeff Pardue has consulted in Wilkesboro since 1982 and incorporated the business as Forestland Consultants, Inc. in 1996; he is a Fellow of the Society of American Foresters, a past president of the N.C. Society of Consulting Foresters and a licensed N.C. real estate broker, and a second registered forester, Will Beauchamp, joined in 2023 alongside an office manager who has been there since 1992. The firm describes its clients as private, non-industrial owners holding anywhere from five acres to five thousand or more, and its own published harvest list bears that range out at the small end: ongoing and past jobs run from nine acres in Wilkes and in Ashe up to 145 in Alleghany, spread across Wilkes, Yadkin, Iredell, Ashe, Alexander, Alleghany, Burke and Avery counties. It sells timber as the landowner's broker by announced auction, with sale dates and tract sizes posted openly on the site, and adds logging road design, herbicide contracting, pre-commercial thinning, cost-share guidance, hunt lease management, forest mapping and expert witness work to the register's list. Written management plans are offered partly to qualify land for North Carolina's Use Value Assessment programme, which cuts the property tax on forestland. On tract size the firm states that most of its clients “own as little as 5 acres to as much as 5,000 acres or more”, and its published sale list includes jobs of 9 and 10 acres, so five acres is the smallest holding it says it works with. As described on forestlandconsultants.com, read 22 September 2026.

Eastern Forest Consultants describes itself as a professional forest consulting firm serving the eastern United States, based in Clemmons with an additional office in Christiansburg, Virginia. Its primary client is the non-industrial private forest landowner, and the firm says it has found a niche providing services for landowners with relatively small projects, starting with a free initial consultation and a site visit with a forester. Its argument to owners is that active management beats letting a stand develop naturally, yielding greater returns in less time, and that neglect carries real risk from catastrophic wildfire, invasive species and forest pests, whether the objective is income, wildlife, hunting or long-term stewardship. It recommends a management plan that is kept current and actually executed. Published services include timber sales, timber inventory, management plans, herbicide application, tree planting, boundary line recon and painting, crop tree release, pre-commercial thinning, forest road layout, GPS and GIS mapping, and timber trespass resolution. The firm also contracts its crews to other consultants and agencies on an hourly, daily or production basis, and maintains relationships with the North Carolina Forest Service, the Virginia Department of Forestry and the U.S. Forest Service. State registration covers fifty-one counties across the mountains and piedmont. As described on easternforestconsultants.com, read 23 September 2026.

Two registered foresters, and the older of the two registrations sits twenty-ninth of 178 on the state register — near the front of the line. Coverage takes in the western piedmont and foothills and reaches up into Ashe, Avery and Watauga. Alongside appraisal, cruise and sale administration, the firm lists surveying, wetland delineation and environmental impact statements. That is an unusual pairing: the same visit that measures the timber can settle a boundary line or flag a wet corner before it stalls the harvest. ACF membership means consulting is the business, not a sideline.

Forty-seven counties is wide coverage by any measure — more than double what the median firm on the register carries — and this footprint runs from the Uwharries and the Charlotte-to-Triad piedmont north to the Virginia line and west into Wilkes, Watauga, Ashe and Avery, with a southern arm through the sandhills at Hoke, Scotland and Cumberland. Sixteen services, the complete sale set among them: appraisal, cruise, sale administration. Wetland delineation and urban forestry on the same list is a less common pairing.

Elkin sits roughly in the middle of this range: a band of twenty counties running from the Triad northwest through Surry and Wilkes into Ashe, Watauga and Avery. That is median reach for the register — half the firms cover fewer. Fifteen services listed, including the full sale sequence of valuing the stand, cruising it and running the sale through to contract, plus herbicide application, wetland delineation and stewardship plans. One registered forester, and no website on file.

Evergreen Forest Management is Daron Brown, a North Carolina registered forester based at Millers Creek in Wilkes County, and the register puts him across thirty-five counties, from Ashe and Watauga down through Burke and Catawba to Guilford and Rockingham. His own account is more specific. He writes that his career began in 1989 in eastern North Carolina as a procurement forester for a wood dealership and sawmill, and that after ten years buying timber and managing loggers he moved back to Wilkes County and opened Evergreen in 2000. Since then, he says, he has served clients in northwestern North Carolina and southwestern Virginia, most of the work being timber sales and appraisals intermixed with stewardship and management plans; the home page also announces services for all of northeast Tennessee. The site describes a practice specialising in timber sales for private landowners, with management and present-use tax plans, stewardship plans, forest inventory and mapping, wildlife management, reforestation, thinnings, prescribed burns, hunting lease management, insect and disease control and invasive vegetation control alongside. The timber sale contract is set out step by step: marking property lines and securing a surveyor if they cannot be found, a full appraisal of acreage, species, size, volume and market value, advertising the timber and overseeing bidding or negotiation, handling timber deeds and cutting contracts, supervising the harvest for compliance, and a closing inspection against state environmental rules — which, the site notes, can otherwise leave a landowner fined for a logging contractor's violations. Appraisals are offered for estate divisions, financial planning, tax baselines and loan collateral, and come as a written valuation broken down by species, stand, diameter, height and board foot. Brown states he is a member of the Society of American Foresters, licensed and insured for controlled burns and an N.C. licensed forest pesticide and herbicide applicator, and that the firm finds state and federal cost-share funding for clients and files the applications on their behalf. He also sells real estate through Realty One Group Results. As described on evergreenforestry.com, read 23 September 2026.

Registration number 715 sits in the first quarter of the 178 registrations on the state register, so this is a long-standing entry. Coverage is eighteen counties in the western piedmont — the Charlotte and Gastonia side of the state, up through Iredell and Davie into the Triad, and west to Rutherford and Polk. Appraisal, cruising and sale administration are all listed, with timber stand improvement, herbicide application and urban forestry alongside. One registered forester; no website or associations on file.

Tight and central: sixteen counties through the middle and north of the piedmont, with Davidson, Davie, Rowan and Randolph at the core, Surry and Stokes up on the Virginia line, and Granville and Person to the east. Ten services, appraisal, cruising and sale administration among them, so a stand can be valued, measured and taken to sale. Forest taxation and forest real estate are also recorded — the questions that surface when land and timber change hands at the same time.

Alliance Forestry, Inc. is a forestry consulting business based in Dallas, North Carolina. The Dallas office, led by Brian Medlock, covers Western NC, SC, and VA. The company also has a branch in Tarboro, North Carolina, run by Mike Wittig, covering Eastern NC, SC, and VA. On the consulting side, the work includes timber sales, appraisals, inventories, forest management plans including Forest Stewardship plans, boundary line maintenance, and forest taxation assistance. The staff includes NC Registered Foresters, and the business holds N.C. Registered Forester #1124. They also do land clearing and site work, custom herbicide applications for utility companies managing rights-of-way, and forestry herbicide work by aerial, ground, and backpack methods, as licensed pesticide applicators in NC, SC, and VA. On the planting side, they put in over a million seedlings a year, including loblolly pine, longleaf pine, and a variety of hardwood species, with guidance on genetics, planting density, and seedling type. Mapping is handled through GIS and GPS work, and "Acreage determinations can be made in the office or the field." Wildlife management services cover food plots, prescribed burning, and removal of nuisance animals including beavers. This suits a landowner who wants one outfit that can run a timber sale, handle the paperwork and mapping, and also come back later for planting or herbicide work, rather than hiring out each piece separately. From allianceforestry.com, read 10 October 2026.

Blanton Forestry, PLLC is a one-forester practice in Dobson, Surry County, whose N.C. Forest Service consulting-forester register entry covers 29 counties reaching from the northern mountains through the foothills to the Charlotte suburbs and records nine services: forest management plans and mapping, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, logging engineering, recreation management, forest taxation and wildlife management. The firm describes itself on its own site as a forestry-wildlife consulting business located in Surry County and serving northwest North Carolina and southwest Virginia, and says its mission is to help landowners manage their natural resources to accomplish their goals, which it says can range from managing timber for income to creating better wildlife habitat; it notes that forest management is a long term process and that income from it is usually a once in a lifetime event for most landowners. On services the firm says it provides inventory work for timber buyers, sawmills and other consultants; timber appraisals used to judge the timing of a sale, establish timber basis or value an estate; forest and wildlife management plans, which it notes are also required to qualify for Present Use Evaluation for deferred county property taxes; and timber sales, for which it says it locates the sale boundaries, conducts an appraisal, provides an estimated market value, sends notices to prospective buyers, runs the sale and oversees the harvest. The site publishes a table of its timber sales with acreage and volume for each, showing tracts from a few acres up to parcels of around fifty acres in Surry, Yadkin and Stokes counties and one in Carroll County, Virginia. The firm is owned and operated by Chris Blanton, who the site says holds dual B.S. degrees in fisheries and wildlife management and forest management, graduated in 1998, and has since worked in contract forestry services and consulting forestry; he is a Registered Consulting Forester in North Carolina and, in the firm's words, a candidate member of the ACF. The firm publishes its completed timber sales with the tract size of each, and the smallest of them is the Stroud sale in Surry County at 3.2 acres (65 MBF), so it has demonstrably worked a tract that size; the minimum recorded here is taken from that job rather than from a stated policy, and the firm is welcome to correct it. As described on blantonforestry.com, read 23 September 2026.

Three Rivers Land Trust appears on the N.C. Forest Service consulting forester register, which credits it with a broad service list — forest management plans and mapping, reforestation, timber stand improvement, timber sale and contract administration, insect, disease and fire protection, prescribed burning, recreation management, herbicide application, wildlife management, urban forestry and stewardship plans — across fifteen counties from the central Piedmont through the Uwharries and down into the Sandhills. A landowner should know before calling that the organisation's own website describes something different. It presents itself as a non-profit conservation land trust, not a consulting forestry practice for hire. Its site states that it works with private landowners and public agencies “to conserve the most important natural, scenic, agricultural, and historic places in a 15-county region of the Piedmont and Sandhills of North Carolina,” and that since 1995 it has worked “to offer reasonable and attractive options to landowners who want to conserve their lands and keep them undeveloped in perpetuity.” The stated mission is to work thoughtfully and selectively with property owners on natural areas, rural landscapes, family farms, scenic rivers and historic places. The work it publishes is conservation easements, land purchase and public access: the site reports 53,714 acres permanently conserved, 396 stream miles, 8,405 acres transferred to public recreation, 31,837 acres of wildlife habitat, 21,582 acres of local farmland and 3,968 acres conserved for national defense near Fort Bragg. It also runs a Sportsman Access Program and a Habitat Enhancement Lands Program, and is campaigning to buy Alcoa-owned land on the Tuckertown Reservoir to keep it open as game lands. No timber sale, cruise or appraisal service is advertised anywhere on the site, and the site names no forester; the registration the register carries is the authority for that side of the entry. The office is at 204 East Innes Street in Salisbury, open Monday to Friday, 8am to 5pm. As described on trlt.org, read 23 September 2026.

All one hundred counties — one of the few listings on the register that covers the entire state. The registration here is number 8, the second-oldest of the 178 registrations on the register, which is about as long a tenure as North Carolina forestry has to offer. Beyond the sale work of appraisal, cruise and contract administration, this firm surveys, so a boundary question and a timber cruise can be settled on the same visit. Christmas tree management, wetland delineation and environmental impact statements are also listed.

Yadkin Forestry & Realty has been serving landowners since 1997, and the practice pairs forestry consulting with real estate — the site points visitors to an affiliated brokerage at YadkinRealEstate.com. Its stated objective is to work closely with landowners to protect and promote their interests in forestry and land-related practices, with a consulting forester who stays current on market trends so clients get the best value from their forestry investments. Todd Dowdle is described on the about page as a Registered Forester in both North and South Carolina, a Certified Arborist with the International Society of Arboriculture and a licensed North Carolina Real Estate Broker, holding a bachelor's degree in Forest Resource Management from NC State University along with study in Forest Resources at Penn State University and business management. The firm's own service list runs to timber sales and appraisals, reforestation, acquisition tax basis work, pine thinning, prescribed fire, timberland sales and acquisition, management plans, boundary maintenance, GPS/GIS mapping and real estate sales and acquisition, with further pages on insect control, herbicide and fertiliser, wildlife and recreation, tax incentives and forest economics. On timber sales it describes advertising the sale, securing and evaluating bids, preparing and enforcing contracts, and pre-planning and managing the logging operation, and it frames management planning as aiming at the highest economic return while potentially reducing annual county land taxes. On reforestation it makes an explicit case for genetically improved loblolly: a naturally regenerated hardwood stand typically produces around 50 to 60 mature trees per acre by 60 to 70 years of age, while improved loblolly seedlings can yield 110 to 120 mature sawtimber trees per acre on a 30 to 40 year rotation. Affiliations named on the site are the Association of Consulting Foresters of America, Society of American Foresters as a Certified Forester, the International Society of Arboriculture as a Certified Arborist, the Tree Farm Program as an inspector, and the NC Forestry Association. The register territory is thirty-seven counties across most of the piedmont — Mecklenburg and Wake at either end, Randolph and Davidson in between — climbing into the northwestern mountain counties of Ashe, Alleghany, Avery and Watauga; the firm's own pages describe the practice in terms of North and South Carolina rather than a county list. (source: yadkinforestry.com, read 22 September 2026)

Stanly, Montgomery and Randolph sit at the middle of this territory, which reaches out to Mecklenburg, Iredell, Moore and Anson — fourteen counties of central and southern piedmont. The service list is the working core rather than the full menu: management plans, reforestation, stand improvement, and the appraisal, cruise and sale administration a timber sale runs on, with forest taxation and wildlife management alongside.

Eighteen services puts this listing in the top tenth of the register for breadth: appraisal, cruising and sale administration at the core, then prescribed burning, herbicide application, wetland delineation, forest real estate, taxation and urban forestry layered on top. Coverage runs to twenty-six counties across the southern piedmont and Sandhills, from Mecklenburg east to Johnston and down into Cumberland and Robeson. The Association of Consulting Foresters, which takes full-time consultants only, is listed. The registration itself is a recent one.

Fifty-eight counties is a big footprint — wider than nine out of ten firms on the register — and it stretches from the mountain counties around Watauga and Avery clear across the piedmont into the inner coastal plain at Wayne, Greene and Edgecombe. Two registered foresters, so the work does not stall if one is booked. Appraisal, cruising and sale administration are all listed, and unusually the firm pairs woodland work with urban forestry and an arboriculture credential, which matters if the tract sits on the edge of a growing town.

Charlotte's ring of counties, worked from an office the register places just over the line in Rock Hill, South Carolina: Mecklenburg, Gaston, Union, Cabarrus, Iredell and the rest of the southwestern piedmont, fourteen in all. The registered service list is compact and sale-focused, covering appraisal, cruise, sale administration, reforestation, stand improvement, forest real estate, taxation, marketing and wildlife, with no prescribed burning, surveying or wetland work. That is a timber-sale practice rather than a full-service land consultancy. The business now trades publicly as Forestry and Land: the timberlandadvisors.com address redirects to forestryandland.com, which still carries Timberland Advisors as its site name. The practice is Tim Cartner's, the registered forester the state records against this entry. He says he is a Carolina native with a 1994 forestry degree from North Carolina State University, licensed to practise both forestry and real estate in North and South Carolina, with over three decades of what he calls boots-on-the-ground forestry and real estate experience, and he publishes a mailing address at a post office box in Albemarle, North Carolina. His own stated work area is wider than the register's fourteen counties and crosses the state line: seventeen North Carolina counties, adding Forsyth, Randolph, Davidson, Davie and Yadkin to the piedmont core, plus Chester, Chesterfield, Kershaw, Lancaster and York in South Carolina, with work outside that area taken case by case and mainly for buyer representation and large-acreage timber sales. He offers forest management plans at three levels of detail, most on a ten-year horizon, all meeting the requirements of the Forestry Present-Use Property Tax Program and priced case by case; timber appraisals broken down by species and product, with statistically verified volumes and aerial and terrain maps; and represented timber sales. He is equally direct about what he will not take on: no yard-tree removal, no clearing of housing lots and no hunting leases. As described on forestryandland.com, read 23 September 2026.

The office is over the state line in Rock Hill, South Carolina, but the coverage is anything but local — 48 North Carolina counties, from Union and Mecklenburg up through the Triad and out west as far as Madison, Mitchell and Yancey. Appraisal, cruising and sale administration are all recorded, the set needed to run a competitive sale end to end. ACF membership marks this as full-time consulting work. Twelve services in total; no website on the register.

Fourteen counties centered on the Uwharrie country — Montgomery, Randolph, Stanly, Moore — reaching west to Iredell and Cabarrus and south into Richmond and Scotland. Compact regional coverage with the full sale package behind it: appraisal, cruise, and administration of the sale itself. Prescribed burning and logging engineering are both listed, which is a working-woods combination rather than a paperwork one. No website is recorded.

All 100 counties, which only a handful of firms on the state register can claim — wherever the tract sits in North Carolina, this one covers it. Two registered foresters, and the older of the two registrations is number 482, sixteenth-oldest of the 178 on the register. Appraisal, cruise and sale administration are all here, so a landowner can value the stand, measure it and run the sale through to contract in one place. Seventeen services in all, out as far as Christmas tree management, urban forestry and forest taxation. The firm holds Association of Consulting Foresters membership, which is limited to full-time consultants. The firm calls itself family owned and says it has run a consulting forestry business for over 40 years; William H. Lock has retired from full-time forestry work and his son Jonathan C. Barnes, who passed the state forestry exam in 2002, now runs the company as president. Alongside state registration in both North Carolina and Virginia it claims Certified Forester and Certified Arborist credentials, Tree Farm Inspector status and Technical Service Provider approval for NRCS cost-share programs, and it offers work turn-key — timber inventory, marketing, harvest inspection and reforestation through one office — plus timber tax basis estimates, timber trespass reports, growth models for income projections and landowner seminars and field tours. Real estate is the one thing it has pulled back from: the site says that side is now limited to advice and referrals rather than listing and selling land. Its public timber sale notices, bids taken sealed at the office, run from 2010 through 2021 and cover tracts from a few acres up to about 280, clustered in Rockingham, Guilford, Alamance and Caswell counties and over the line into Henry and Pittsylvania counties, Virginia. A first consultation is offered free. As described on whlock.com, read 22 September 2026.

Daniel W. Edwards, Consulting Forester P.A. is a forestry consulting and timberland brokerage based in Asheboro, North Carolina. Dan Edwards works with landowners on timber and land matters across North Carolina, South Carolina and Virginia, with named service counties in North Carolina that include Randolph, Davidson, Forsyth, Guilford, Wake, Chatham, Orange, Durham, Johnston, Moore, Richmond, Robeson, Rowan and others. The work covers forest management plans and mapping, timber appraisal, timber cruise and volume estimate, timber sale and contract administration, insect, disease and fire protection, forest real estate, forest taxation, and utilization and marketing. Species worked with include loblolly pine, longleaf pine, yellow poplar, white oak, hickory, maple and gum. On a timber sale, the approach covers "timber valuation, buyer selection, sale preparation, contract terms, boundary considerations, harvest oversight, and post-harvest recommendations." For land purchases, Dan will "evaluate potential land purchases with regard to timber value, soils, local market values, and potential problems." No stated minimum acreage was found. The smallest job shown is +/- 23 Acres in Davie County, listed for sale. Dan Edwards holds N.C. Registered Forester #612 and is a licensed real estate broker in North Carolina. The business states over 40 years of experience. This fits a landowner in North Carolina, South Carolina or Virginia who wants one person to handle both the timber side and a possible land sale, rather than juggling a forester and a broker separately. From dedwardsforester.com, read 10 October 2026.

Tugwell Consulting Forestry, P.A. is a consulting forestry firm based in Asheboro, North Carolina. They work with landowners, private industry, and government agencies, handling timber inventory and appraisals, timber sales, forest management plans, timber harvest recommendations, thinnings, and reforestation. They also offer real estate services for timberland. Their work covers the full range a landowner might need: forest management plans and mapping, timber cruising and volume estimates, timber sale and contract administration, logging engineering, timber stand improvement, prescribed burning, wetland delineation, and wildlife management, among other services. The firm holds N.C. Registered Forester credential #775, and says it is "home of the 2016-2018 President of the Association of Consulting Foresters of America, Inc." They describe over 35 years of forestry experience. They are based in the center of North Carolina and serve landowners across a long list of counties, including Randolph, Guilford, Davidson, Chatham, Moore, Wake, Montgomery, and Richmond, among many others, and say they also travel into surrounding states to reach clients. Tugwell describes itself as "a privately owned business located in Asheboro, NC specializing in property management and timber investments," working with owners who want to raise property value, grow timber value, build a sustainable asset, or improve wildlife habitat. This fits a landowner anywhere in central North Carolina who wants one firm to handle the whole process, from walking the tract and writing the management plan through to running the timber sale itself, rather than hiring separate people for each step. From tugwellforestry.com, read 10 October 2026.

Registration number 335 puts this firm's oldest credential ninth-oldest of the 178 registrations on the state register — one of the longest tenures in North Carolina consulting forestry. Two registered foresters, twenty-seven counties covering the southern and central piedmont from Mecklenburg and Gaston up through the Triad, with the Sandhills along the bottom edge. Seventeen services: urban forestry, forest taxation and environmental impact statements on top of the appraisal, cruise and sale-administration trio. Memberships in ACF, SAF, the N.C. Forestry Association and the Forest Landowners Association — an unusually deep set.

Kiker Resource Management works out of Wadesboro, at the centre of a thirty-six county North Carolina territory that runs west to Cleveland and Gaston, north through Mecklenburg, Iredell, Durham and Granville, and east across the Sandhills to Brunswick, New Hanover and Pender. Its own site casts the practice wider still, describing work throughout the southeastern United States including Virginia and South Carolina, with a second office at Anderson, South Carolina. The home page sums the firm up as 'forest resource management, wildlife management consulting services, land sales', and it publishes service pages for timber sales, forest and land management, reforestation, prescribed burning, hunting leases, mapping and technical services, wildlife management consulting, forest certification and real estate. The forest and land management page says KRM starts every job by learning the landowner's objectives, whether that is long-term management of high-yield pine plantations, wildlife habitat improvement, a one-time harvest or outdoor recreation, then inventories species composition, stand origin, acreage, site quality and stocking before writing a plan carrying timber value estimates, harvest schedules and cash flow estimates. The reforestation page is the most detailed: KRM reforests an average of 2,500 acres a year for clients, buys about 1.5 million genetically improved seedlings annually, keeps an employee with the planting crews full time for quality control, and puts its herbicide and tree planting work out to bid each year. Its history page dates the practice to June 1978 under a predecessor name, Kiker Forestry and Realty, Inc., with the present LLC formed when Jason Kiker bought the firm in 2007, and counted ten full-time and two part-time employees in 2023, among them eight graduate foresters. The firm also holds an FSC group certificate and takes part in the American Tree Farm System. As described on kikerforestry.com, read 23 September 2026.

Plank Road Forestry, LLC is a forestry consulting business in Wadesboro, North Carolina. They work with private landowners on timber and land management, and they also do utility vegetation work and forestry mulching. Their land management services include management plans, timber inventory cruising, timber sales, wildlife management, site preparation and planting, prescribed burning, and herbaceous weed control. On the forestry side they also handle reforestation, timber stand improvement, timber appraisal, timber sale and contract administration, prescribed burning, environmental impact statements, stewardship plans, and insect, disease and fire protection. Their mulching and clearing work covers right-of-way and land clearing, invasive species control, and hazard tree identification. They say their land management approach has "a long history of helping private landowners plan and implement the best strategies for the use of their land." Their team includes a N.C. Registered Forester, ISA Certified Arborists, and ISA Utility Specialists. They serve a wide stretch of counties, including Anson, Cabarrus, Mecklenburg, Union, Richmond, Rowan, and Moore, among others. Plank Road Forestry was founded in 2011. Much of their site centers on utility vegetation management and right-of-way work, with timber sales for private landowners as one part of their land management services. This outfit may suit a landowner who wants a forester who also understands utility and right-of-way issues, not just a straightforward timber sale. From plankroadforestry.com, read 10 October 2026.

Red Hill Forestry, PLLC is a private forestry consulting company based in Wadesboro, North Carolina. It works with landowners from the first planting through to a final timber harvest, and from the tract itself through to the paperwork around a sale. Its services cover forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimate work, timber sale and contract administration, insect, disease and fire protection, prescribed burning, forest real estate, recreation management, forest taxation, utilization and marketing, and wildlife management. A timber sale can be set up as a lump-sum sealed bid, a negotiated lump sum, or a unit sale by the ton, chosen to fit the tract "to maximize profit." Tax plans, which can lower property taxes, are written for landowners who own 20 acres or more of forestland managed for commercial forest products; a smaller tract can be rolled under a larger parent tract for the same tax treatment. It serves landowners in Anson, Cabarrus, Chatham, Davidson, Davie, Harnett, Hoke, Iredell, Lee, Mecklenburg, Montgomery, Moore, Randolph, Richmond, Robeson, Rowan, Stanly, Surry, and Union counties, and more broadly across North Carolina and South Carolina. Owner Paul L. Turner III holds North Carolina Registered Forester #1781, Real Estate Broker License No. 300086, North Carolina Certified Prescribed Burner #684, and South Carolina Prescribed Fire Manager #1702. This suits a landowner who wants the appraisal, the sale terms, the tax side, and the real estate side handled by one person for a tract of commercial forestland. From rhforestry.com, read 10 October 2026.

Wildwood Consulting, PLLC is a forestry consulting outfit based in Asheville, North Carolina. They work for the landowner, not the mill or the logger, helping with forest management plans, timber inventory and appraisal, timber basis work for tax purposes, timber sales and harvest oversight, silvicultural treatments, and urban forestry. Two of their staff are N.C. Registered Foresters. Beyond those core jobs, their broader services list runs to timber cruises, reforestation, timber stand improvement, prescribed burning, forest real estate, recreation management, wetland delineation, and wildlife management, among others. They cover a wide stretch of western North Carolina and a long list of counties, from Alexander and Ashe down through Henderson and Transylvania to Yancey, plus work in east Tennessee, the upstate of South Carolina, and southwestern Virginia. There's no stated minimum acreage, but the smallest job they describe is a 109 acre controlled burn at Green River Preserve, so that gives a sense of the scale they're used to working at. Their own words put the point plainly: they aim to "know the value of your assets before you make a decision" and to "get the best price for your timber and the best value out of any harvest activity." This fits a landowner with a sizable tract, especially one in or near the western Carolina mountains, who wants a forester handling the planning and the sale, not just a logger showing up with a truck. From wildwood-consulting.com, read 10 October 2026.

Blue Ridge Forestry is a consulting practice based in Asheville, carried on the N.C. Forest Service register for thirty-two counties running from Cherokee and Clay in the far southwest, up through the Blue Ridge and out across the foothills into Mecklenburg and Union. Its site headlines sustainable land management and forestry services and states a mission of providing forest resource expertise to landowners, professionals and companies. The forest management planning page describes basic, comprehensive and stewardship plans alongside harvest, regeneration and wildlife plans, notes that a stewardship plan is a first step toward NRCS cost-share funding or Tree Farm, FSC or SFI certification, and explains the North Carolina present-use-value route, which asks a landowner to hold 20 acres of timberland and file an approved plan prepared by a registered forester. The valuation page says the firm's specialty is quality Appalachian timber and that it also cruises white and southern yellow pine, working across veneer logs, grade saw-logs, pallet logs, plywood and peeler logs, chip-n-saw, pulpwood, firewood, posts and poles, and biomass. Value estimates are produced for acquisition due diligence, IRS timber basis, casualty loss, sale planning, timber theft, insurance claims and estate planning. Tract reconnaissance uses unmanned aerial systems and GIS mapping to size up a tract quickly before deciding whether a full inventory is warranted. On sales the firm says it brokers timber much like a real estate broker and then administers the contract through the harvest with regular inspections, and that it has handled hundreds of timber sales over more than thirty years of implementing plans. Other work includes boundary relocation and marking by GPS, road and trail planning and layout, mapping and GIS, technical training, and harvest inspections as certified American Tree Farm inspectors. As described on blueridgeforestry.com, read 23 September 2026.

Kent Parris Forestry Company is a consulting forestry firm based in Winnsboro, North Carolina, run by Kent Parris, who has been a consulting forester for 32 years and had 13 years in the timber industry before that. Alongside the forestry work, the firm also operates as a real estate brokerage, handling land sales and acquisitions. The services on offer include forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, prescribed burning, herbicide application, wildlife management, and stewardship plans. On the ground that translates to land management, wildlife habitat improvement, timber sales, site preparation and tree planting, harvest site supervision, timber inventory and appraisal, management plans or harvest schedules, timber marking, and hunting leases. Kent Parris holds North Carolina Registered Forester license #871. The firm works with private landowners in South Carolina and parts of North Carolina, naming Cabarrus, Caldwell, Catawba, Cleveland, Gaston, Iredell, Lincoln, Mecklenburg, and Union counties. The stated approach is to "engage the landowner in the decision making process for their property," whether the land is held for recreation, wildlife, timber production, or investment. This suits a landowner who wants one person to handle both the timber work and a possible land sale, and who values a forester with decades behind him rather than a newer outfit. From kentparrisforestry.com, read 10 October 2026.

Registered in North Carolina, but the office is across the line in Camden, South Carolina. Coverage runs to the far western end of the state — Cherokee, Clay, Graham, Swain — up through Buncombe, then east to the Charlotte piedmont and the Sandhills. Thirty-two counties. Appraisal, cruising and sale administration are all listed, plus logging engineering, which counts on steep ground.

The office is over the state line in York, South Carolina, but the coverage is squarely western North Carolina: twenty-four counties from the far southwestern mountains through the foothills and into Mecklenburg and Union. Two registered foresters. Appraisal, cruise and sale administration are all there, with prescribed burning, herbicide application, wetland delineation and urban forestry behind them. No association memberships and no website appear in the register.

Registration 513 sits seventeenth-oldest on the state register, and the firm holds Association of Consulting Foresters membership — ACF admits full-time consultants only, so it signals this is the business rather than a sideline. The office is in Blythewood, South Carolina, but the NC Forest Service register credits sixty-two North Carolina counties: the mountains, effectively the whole piedmont, the sandhills and the southeastern coast. Fourteen services, with appraisal, cruising and sale administration at the center and forest taxation, forest real estate and stewardship planning around them.

Natural Resources Management and Mapping Service works from Waynesville across the thirty-two North Carolina counties on its register entry, the mountain west and foothills running east into the Charlotte piedmont, and its home page describes the practice as consulting for western North Carolina woodlands with over 30 years of experience working with woodland owners across the state. The services page says NRMMS has been working with woodland owners across North Carolina since 1993 and specialises in custom forest management plans for tax purposes or forest stewardship, adding that it tailors plans for land ownership groups and associations wanting to better care for shared woodlands and raise their aesthetic and economic value; example stewardship plans, forest tax plans and a homeowners association plan are published for download. A second side of the business serves industry rather than the landowner: geospatial and forest analytics, in particular detailed analysis of feedstock availability and competition, which the firm calls woodbasket analysis, for forest industries, communities and economic developers. Outreach is the third strand, with stated ties to North Carolina Tree Farm, Cooperative Extension and the community college system, and landowner and real estate professional training offered through community college continuing education. Owner James Jeuck, PhD, describes himself as a professional forester and consultant since 1993 with four degrees in forestry and a concentration in natural resource economics; he has taught forestry and geospatial technologies at Haywood Community College for over 15 years, spent more than eight years with NCSU Extension Forestry, and says he has performed over 40 woodbasket site analyses. Three associates are named alongside him: Grizel Gonzalez-Jeuck, in natural resource outreach and project planning since 2012; Gary Fitzgerald, a mechanical engineer with a technical degree in forest management; and Peter Barber, a forest management graduate with eighteen years as a Florida real estate broker behind him. As described on nrmms.com, read 23 September 2026.

Milliken Advisors Inc. is a forestry consulting and timberland brokerage business in Columbia, North Carolina. It works with landowners on the kind of jobs that come with owning timberland, from planning a sale to planting trees back after a harvest. The work on offer covers forest management plans and mapping, reforestation, timber stand improvement, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, insect, disease and fire protection, prescribed burning, forest real estate, recreation management, forest taxation, utilization and marketing, herbicide application, and stewardship plans. The forester holds N.C. Registered Forester credential #1394. Milliken Advisors serves landowners across a long list of North Carolina counties, among them Wake, Mecklenburg, Guilford, Buncombe, and Dare. The business has been working with landowners since 1949. Its own description of how a job runs is plain: "Once we know what you want, we take a good look at your land: its current state, what's happening in the market, and what the future could hold. Then we build a strategy that actually fits your needs." On follow-through, it says "You don't have to worry about juggling contractors or chasing down deadlines." This fits a landowner who wants one firm to handle a timber sale or a management plan from start to finish, rather than piecing the work together themselves. From millikenadvisors.com, read 10 October 2026.

Seven registered foresters — as many as any firm on the state register — and sixty counties covered, which together make this one of the largest consulting operations working in North Carolina. The reach runs from the foothills in Burke and McDowell across the piedmont and the sandhills to the coast at Brunswick, Onslow and Carteret. The full sale package is here: appraisal, cruise, and running the sale through to contract. Nineteen services in all, including prescribed burning, wetland delineation, environmental impact statements and forest taxation — which matter when a timber sale is one piece of a larger land or estate question. The company's own website is a national corporate one rather than a local office page, and it describes a firm of that scale: a corporate office in Charlotte, offices across the Northeast, Southeast, Lake States, Pacific Northwest and Gulf regions, and almost sixty years spent helping landowners manage, sell, buy, improve and enjoy millions of acres — AFM dates itself to 1966, when Bartow S. Shaw, Jr. formed the predecessor firm Bartow Shaw and Associates. It states a size threshold for the land management work in its own words: property of fifteen acres or more. The published service lines run well past timber alone — timber sales and timber management, reforestation and silviculture, forest inventory to establish volumes and values, wildlife services and habitat restoration, environmental services, forest carbon, land surveying, wood flow for navigating fibre supply agreements, farmland management through AFM Ag Services, and forestry and property accounting handled by a dedicated team of about twenty including CPAs on staff, covering property tax administration, audit support and hunt lease administration. Forest certification is offered too: the firm says management operations are conducted under FSC, SFI and ATFS guidelines. As described on americanforestmanagement.com, read 22 September 2026.

Every county in North Carolina is listed against this firm — all 100 — which puts it in the small group on the register that will work anywhere in the state. The service list is narrow by comparison: ten entries, built tight around the sale itself, with appraisal, cruising and sale and contract administration at the middle and forest taxation, utilization and marketing, urban forestry and stewardship plans around them. Both ACF and SAF memberships are recorded. One registered forester covers that ground, which is worth knowing when you're arranging a visit.

This firm holds one of the twelve oldest registrations on the North Carolina register, out of 178 — a long stretch on the state list. The office is in Manning, South Carolina, and the North Carolina territory runs twenty-eight counties, from Mecklenburg and Iredell through the Sandhills and down to the Brunswick and New Hanover coast. Fifteen services, including logging engineering, wetland delineation and stewardship plans, and the full sale sequence: value the stand, cruise it, administer the sale. Association of Consulting Foresters membership puts consulting at the center of the business.

Hiawassee sits just over the Georgia line from Clay County, and from there this firm's register entry covers thirty-two North Carolina counties: the whole mountain west, the foothills, and east across the western piedmont as far as Mecklenburg and Union. Seventeen services puts it near the top of the range on the register — the full appraise, cruise and sell package, then prescribed burning, environmental impact statements, urban forestry, wildlife management and stewardship planning. The office being out of state is the one thing to weigh.

3D Land Group, Inc. is a forestry and land consulting business run out of Pawleys Island. It works with private landowners as well as forest product companies and timberland investment groups "throughout the Southeast." The work covers full forest management plans and mapping, timber appraisal, timber cruise and volume estimates, timber sale and contract administration, and logging engineering. It also handles reforestation, timber stand improvement, prescribed burning, road construction and maintenance, mulching, and land clearing, plus wetland delineation, wildlife and recreation management, and real estate brokerage for land. Dan Stuckey, the president, brings 30 years in forest management, wood procurement, and land investment, and the firm says it works to achieve "top of the market" pricing for timber sales. Credentials listed include Registered Forester status in North Carolina, South Carolina, and Georgia, SAF Certified Forester, and Broker-in-Charge licensing in all three states. The firm is active in the Forestry Association of South Carolina. It has operated since 2018. On the North Carolina side, counties served include Anson, Cabarrus, Catawba, Chatham, Cleveland, Columbus, Cumberland, Duplin, Gaston, Harnett, Hoke, Iredell, Johnston, Lee, Lincoln, Mecklenburg, Montgomery, Moore, New Hanover, Pender, Richmond, Robeson, Rutherford, Sampson, Scotland, Stanly, and Union. This fits a landowner who wants more than a timber sale handled, someone thinking about roads, wildlife habitat, conservation, or eventual development alongside the trees, and who wants one firm that can broker the land too. From 3dlandgroup.com, read 10 October 2026.

Statewide coverage — all 100 North Carolina counties — from an office in Gainesville, Georgia. Fifteen services are recorded, including the three that make a timber sale work: appraisal, cruising, and sale and contract administration. Prescribed burning, herbicide application, urban forestry and stewardship plans fill out the rest. The register carries this entry under the name US Forest Service, with one N.C. Registered Forester and no website given.

The N.C. Forest Service register carries Dougherty & Dougherty across sixty-three North Carolina counties, foothills through piedmont to coastal plain — but the firm is run from Georgia. The register address is a PO box in Athens, Georgia, and the North Carolina connection is Derek Dougherty's registration, number 1029, rather than a North Carolina office. Trading as Progressive Forestry, the firm's site states that it “manages forest land for private forest landowners in the Southeastern US” with staff it describes as “college-educated, field-trained, and licensed forestry professionals,” and says its experience spans forest management, real estate investment, research and tree breeding. Its timberland management page sets the services out in detail: property and annual inspections, timber inventory reported in tons, cords or thousand board feet by species and product class, timber appraisal, boundary line marking, prescribed understory burning, plantation establishment, seed source selection, mid-rotation work, GIS mapping, growth and yield modelling, harvest scheduling and forest investment analysis. It also answers a question the register leaves open. The register credits the firm with appraisal and cruising but not with sale administration; the site says the firm prepares and oversees the marketing and harvest itself, by negotiation or sealed bid, with lump-sum or per-unit payment and clear-cut, select-cut or thinning harvests, including logging inspections and its own timber security and tracking system. The firm states it is a certified Forest Stewardship Program plan writer in North Carolina. Hardwood is treated as a speciality: the site argues the South's hardwood resource sits “well below its potential” after a history of high-grading, and describes a system of site and stand evaluation aimed at regular production of grade hardwood. Species named across the site include loblolly, longleaf and slash pine, green ash, yellow poplar and eucalyptus. A consultation line covers audits, seedling advice and expert witness work on timber trespass overcuts and failed plantations. No founding year is published. As described on progressiveforestry.com, read 23 September 2026.

This entry is unusual: a national conservation organization holding a North Carolina registration, with the office on file in Indianapolis, Indiana, and twenty-five counties listed across the western piedmont and the northwestern mountains. The service list is short and specific — management plans, stand improvement, forest real estate, stewardship plans, and all three timber-sale services from appraisal through to sale administration. Both ACF and SAF memberships are recorded. Seven services is among the narrowest on the register, so anything outside that set would have to come from elsewhere.

Peachland is the mill that takes what other yards turn away - gum, hickory, elm, hackberry and sycamore - cutting soft hardwoods into industrial timbers, cross ties and switch ties at a reported 16,000 to 18,000 board feet an hour. Edwards acquired the site in 2012; the parent company started in 1969 out of a dirt-floor chicken house in Marshville and now runs six North Carolina locations along with its own timber company and trucking arm. It is second-generation family owned and FSC certified company-wide. The NC Forest Service's Anson County register lists the Peachland mill as buying standing timber, hardwood grade logs, miscellaneous hardwood sawlogs and pine sawlogs, so a landowner sitting on a mixed, low-grade hardwood stand has a genuine outlet here.

Hunt Forest Resources, LLC is a timber buyer based in Moncure, North Carolina, with forestry consulting, firewood, and wood recycling run alongside it. They buy stumpage, sawlogs, pulpwood, and chip-n-saw timber in pine and hardwood, and they also handle forest management plans and mapping, timber cruise and volume estimates, timber appraisal, timber sale and contract administration, reforestation, timber stand improvement, prescribed burning, herbicide application, insect and fire protection, and wildlife and recreation management. Their registered forester holds N.C. Registered Forester #1438, and the company carries ProLogger and American Tree Farm System (ATFS) standing. They work across a long list of North Carolina counties, from Alamance, Durham, and Wake, through Chatham and Moore, down to Brunswick and New Hanover, and out east to Dare, Hyde, and Beaufort, along with many others. On their own pages they describe offering "a diverse range of services that span the entire lifecycle of forest products, from land and timber management to sustainable harvesting, real estate services, wood products manufacturing and beyond," and say they manage "7,000 acres of timberland annually" across four facilities in the state. This suits a landowner who wants one outfit that can buy the timber, write the management plan, and keep an eye on the ground afterward, rather than stitching together a buyer, a consultant, and a logger separately. From huntforestry.com, read 10 October 2026.

Gilkey's representatives are Registered Foresters in both North and South Carolina, an unusual credential for a business filed under timber buyers rather than consultants, and the company offers landowners a free timberland and harvest assessment through a request form on its contact page. Founded in 1954 by Jess Parton and still family-owned, it manufactures hardwood lumber for the furniture, flooring and specialty wood product trades; the Rutherford County economic development office describes it as having grown into an international supplier. Its buying ground is wider than the county list on this page - the company says it purchases standing timber and offers forestry assistance across western North Carolina, upstate South Carolina and eastern Tennessee, and works within state Best Management Practices for water quality.

Piedmont Timber - Full Service Timber Company is a logging contractor in Greensboro, North Carolina. It has a Google Maps business listing in that category. It is also listed as a timber buyer and a consulting forester. A listing here is not an endorsement.

Austin Hunt Lumber Co is a sawmill and timber buyer in Statesville, North Carolina, serving Iredell County. The company has been family owned since it was founded in 1974. They buy standing timber, harvest it, and will also purchase wooded land outright, along with harvested hardwood logs from loggers. They work in Appalachian hardwoods: red and white oak, poplar, hickory, walnut, cherry, and maple. From the logs they produce lumber, cants, mulch, and sawdust. If you're selling timber, the offer is a free appraisal to start, and for loggers delivering logs, they say "we offer weekly payment and fair grading," with loads received Monday through Friday, 7 AM to 6 PM. Austin Hunt Lumber Co states a minimum of 10 acres of timber, saying "if you have 10 acres or more of timber, we would love to speak with you." This fits a landowner in Iredell County with at least 10 acres of hardwood who wants one buyer able to appraise the timber, harvest it, or buy the land itself, rather than piecing together separate loggers and mills. From huntlumber.com, read 10 October 2026.

Curtis Logging is a timber buyer in Mooresville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 6 counties, including Cabarrus, Gaston, Iredell and Lincoln. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

S is a mill in Mooresville, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Terry Myers Logging is a timber buyer in Union Grove, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 11 counties, including Alexander, Cabarrus, Caldwell and Catawba. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Troutman Logging/Land is a timber buyer in Statesville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 6 counties, including Burke, Catawba, Davie and Iredell. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

W & L Land Associates is a timber buyer in Union Grove, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: SYP, E White Pine, Ash, Beech, Black Locust, Cherry, Hickory and Soft Maple. Products: Standing Timber, Sawlogs, Chip-n-Saw, Pulpwood, Veneer & Plylogs, Sawdust, Shavings and Chips. It covers 18 counties, including Alexander, Burke, Cabarrus and Caldwell. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Billy Speaks & Sons Logging is a timber buyer in Hamptonville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 16 counties, including Alexander, Cabarrus, Caldwell and Catawba. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Blue Ridge Lumber is a timber buyer in Yadkinville, North Carolina. It has a Google Maps business listing in that category. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

BTC- Byrd's Timber Company is a timber buyer in Boone, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 22 counties, including Alexander, Alleghany, Ashe and Avery. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Catawba Valley Timber Co., Inc. is a timber buyer in Vale, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Chip-N-Saw Logs, Ply or Veneer Logs, Pulpwood, Poles, Posts and Chips. It covers 19 counties, including Alexander, Alleghany, Burke and Caldwell. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Cherry Mountain Timber Co. LLC is a timber buyer in Bostic, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 15 counties, including Buncombe, Burke, Cabarrus and Caldwell. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Columbia Forest Products Inc is a mill in Old Fort, North Carolina. It has a Google Maps business listing in that category. It is also listed as a timber buyer. A listing here is not an endorsement.

Cotton Creek Chip Co is a mill in Star, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Davie Lumber & Logging Inc. is a timber buyer in Mocksville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Chips. It covers Davidson, Davie, Forsyth and Iredell counties. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Gilleland's Logging, LLC is a timber buyer in Vale, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 5 counties, including Burke, Catawba, Iredell and Lincoln. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

H W Culp Lumber Co is a sawmill in New London, North Carolina. The family has run it since 1925, now in its third generation, cutting Southern Yellow Pine Lumber for wholesale customers. This is a mill, not a logging crew that comes out to walk your land. Logs are delivered to the New London site, where they're debarked, sawed, dried, and planed. Besides lumber, the mill turns out wood chips, sawdust, and bark as by-products. The company also handles wood procurement and trucking. Its lumber is heat treated and produced under TPI (Timber Products Inspection) certification, so it carries that grade guarantee: "Our products are certified by Timber Products Inspection to ensure our customers receive the grade quality they expect." Stanly County is named as an area served. This is a long-standing operation, sawing pine lumber "SINCE 1925," and it's a sizeable one, running a single-shift mill and producing a large volume of pine lumber a year for shipment to northern and western markets. For a landowner with Southern Yellow Pine to sell, H W Culp Lumber Co is worth knowing as a mill with deep roots in New London and a certification that backs up the grade of lumber it cuts, though it's set up to deal in wood procurement and volume rather than walking a small tract with you. From culplumber.com, read 10 October 2026.

High Country Lumber & Mulch LLC is a sawmill and timber buyer based in North Wilkesboro, in Wilkes County, North Carolina. It does business as North State Hardwoods, and it's been running for over 20 years. This is a mill operation, not a logging crew that comes out and cuts your trees. They buy standing timber and saw it into lumber on site, working in poplar, white oak, red oak, walnut, cherry, hickory, ash, soft maple, sycamore, eastern white pine, and southern yellow pine. All the logs that come through the mill are sourced within 60 miles of North Wilkesboro, pulling from western North Carolina, northern South Carolina, eastern Tennessee, and southern Virginia. If you're a landowner in Wilkes County with timber to sell, the way in is to contact their timber buyer directly about procurement and purchasing. Nothing goes to waste here. The bark gets ground into mulch, sawdust fuels their kilns, and the big logs too large for the grade mill get cut into "live-edge slabs" instead, with thousands in inventory. They describe themselves as "supplying the U.S. and overseas with premium Appalachian hardwoods & eastern white pine" after two decades in the business. This fits a landowner in or near Wilkes County who wants to sell standing hardwood or pine timber to an established local mill, rather than hire out a full logging and land-clearing job. From northstatehardwoods.com, read 10 October 2026.

McDowell Lumber & Pallet Co., Inc. is a sawmill and pallet manufacturer in Asheboro, North Carolina. Alongside running the mill, they buy standing timber, logs, and land, so a landowner can go straight to the people who will actually mill the wood. They work in hardwoods: red oak, white oak, poplar, hickory, gum, ash, sycamore, maple, beech, and mixed hardwoods. Beyond buying timber, their listed work covers timber purchasing and evaluation, forest management planning, logging assistance, reforestation, land management consultation, hardwood sawmilling, kiln drying, surfacing and planing, custom pallet design, heat treating for export, and their own trucking. They describe themselves plainly as a company that will "buy land, timber, and logs," and they also sell mulch, chips, and sawdust locally by the full trailer load. They serve Randolph, Chatham, Davidson, Davie, Montgomery, Forsyth, Iredell, Rowan, Guilford, Rockingham, and Mecklenburg counties. The company traces back to 1974, when Tony McDowell started out scouting timber with "a lumberjack's eye," and it has grown from that single portable saw into a mill that now ships lumber well beyond the Carolinas. This fits a landowner in that stretch of central North Carolina who wants to deal with a mill that buys its own timber and logs, rather than a broker standing between the woods and the saw. From mcdowelllumberco.com, read 10 October 2026.

NCT Associates, LLC is a timber buyer in Lincolnton, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood, Chip-N-Saw Logs, Ply or Veneer Logs and Poles. It covers 19 counties, including Alexander, Burke, Cabarrus and Caldwell. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Parton Lumber Co. is a timber buyer in Lenoir, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: Ash, Cherry, Hickory, Soft Maple, Hard Maple, Red Oak, White Oak and Walnut. Products: Sawlogs and Pulpwood. It covers 8 counties, including Alexander, Alleghany, Ashe and Caldwell. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Piedmont Hardwood Lumber Co., Inc. is a sawmill in Mt Pleasant, North Carolina. It's listed as a mill serving Cabarrus County. If you're a landowner with timber to sell, this is the kind of business that takes logs and turns them into lumber, rather than one that comes out and advises on standing timber or manages a sale for you. Beyond that, there isn't much more detail to share about how they handle jobs, what species they take, or how a sale would run day to day. There's no stated minimum acreage or tract size either, so that's something you'd want to ask about directly before you plan anything around them. This listing suits a landowner who already knows a sawmill is what they need, perhaps because they've had logs cut and are looking for somewhere local in Cabarrus County to take them, rather than someone still trying to figure out the first steps of selling timber off their land. From piedmonthardwood.com, read 10 October 2026.

Precision Logging & Chipping is a timber buyer in Taylorsville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Softwoods and All Hardwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 9 counties, including Alexander, Burke, Caldwell and Catawba. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Ray Lackey's Logging is a timber buyer in Conover, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 7 counties, including Alexander, Burke, Caldwell and Catawba. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

S&L Sawmills is a mill in Denver, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Select Timber Services, Inc. is a timber buyer in Cleveland, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber and Sawlogs. It covers Iredell, Rowan, Stokes and Yadkin counties. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Shaver Wood Products is a lumber yard and sawmill based in Cleveland, North Carolina. It works out of Iredell County and also serves landowners in Rowan County. In the directory it turns up under Alexander County as well. The main line of work here is sawmilling, with some woodworking and retail lumber sales on the side. The services listed are the lumber yard itself, the saw mill, and "custom dimensions and cuts" for buyers who need lumber cut to a particular size rather than off the shelf. Shaver Wood Products has been doing this work for "over 46 years" in the area, so it's not a new operation. There's no mention of standing timber buying, logging, or harvesting, so this looks like a place to sell logs or buy finished and custom-cut lumber rather than a service that comes out and cuts your trees for you. No species are named, and there's no credential or certification listed. If you're a landowner with a tract of trees looking for someone to walk it and make an offer on standing timber, this isn't described as that kind of operation. But if you've already got logs, or you want lumber milled to your own dimensions for a building or woodworking project, Shaver Wood Products is set up for that kind of work in Iredell and Rowan counties. From shaverwoodproducts.com, read 10 October 2026.

Working western North Carolina and the upstate of South Carolina since 1998, this Rutherfordton buyer takes standing timber on tracts of five acres and up. Its Manta business listing says the company is fully insured, employs Certified Pro Loggers, offers free timber value estimates, and provides logging services as well as buying — all of it the company's own account of itself rather than an independent verification. The March 2024 statewide timber buyers list published by the South Carolina Forestry Commission carries the same Rutherfordton address and phone, so tracts on either side of the state line are in range.

Unlike most crews on the Forest Service register, this Burnsville company hauls its own wood: it holds USDOT number 1009797 as a private interstate carrier of logs, poles, beams and lumber, with six power units and six drivers on the MCS-150 filed in July 2025. It is listed as a member of the Carolina Loggers Association, and the Yancey County buyer list records a broader species range than this listing previously carried, adding basswood, cherry and eastern white pine to the oaks, maples, hickory, walnut, ash and southern yellow pine. The BBB file, opened in September 2018, shows five employees and no rating. No website or published reviews were found.

Stewart's Forest Services, Inc. is a timber buyer in Germantown, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 99 counties, including Alamance, Alexander, Alleghany and Anson. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Suncrest, LLC is a timber and wood products business in Waynesville, North Carolina, also known as Suncrest Mulch & More LLC. It buys timber and also turns wood into mulch and other products on site. On the timber side, the work includes sawlog purchase, pulpwood purchase, chip-n-saw purchase, and timber cruising, covering species like Southern Yellow Pine, Red Oak, White Oak, Yellow-Poplar, and Black Walnut. It serves landowners across Alexander, Alleghany, Ashe, Avery, Buncombe, Burke, Caldwell, Cherokee, Clay, Graham, Haywood, and Henderson counties. The mulch and biochar side runs from the Jonathan Creek Rd location, where it also offers bulk mulch delivery and retail yard sales to the public, working with pine and hardwood logs. As the business puts it, "we make our mulch out of repurposed locally harvested logs," and it describes the result as made "simply and sustainably." Mulch delivery is available within the J Creek area only, with a 10 yard minimum. The yard is open to walk-in customers with no appointment needed, and it takes cash, check, or credit card, with a 3.5% charge on card payments. This fits a landowner in its service counties who wants one place that will buy standing timber and also has an outlet for wood by-products like mulch, rather than a straight timber-only outfit. From suncrestmulch.com, read 10 October 2026.

Sutphin Logging Inc is a timber buyer in Mount Airy, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Chips. It covers 5 counties, including Iredell, Stokes, Surry and Wilkes. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

TD&J Logging is a timber buyer in Albemarle, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs and Pulpwood. It covers 7 counties, including Davidson, Davie, Iredell and Randolph. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Tommy Fortner is a timber buyer in Taylorsville, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber and Sawlogs. It covers Alexander, Catawba and Iredell counties. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Uwharrie Lumber Co. is a timber buyer and mill based in Troy, North Carolina. They buy stumpage, sawlogs, and pulpwood, and they run a hardwood sawmill too, so they can take wood from standing timber through to sawn lumber. They work with Red Oak, White Oak, Yellow-Poplar, Hickory, and Mixed Hardwoods. They serve a wide stretch of counties: Alamance, Anson, Cabarrus, Caswell, Chatham, Cleveland, Cumberland, Davidson, Davie, Durham, and Forsyth. There's no stated minimum acreage, and no clear word on how small a job they'll take on, so if you're sitting on a small lot it's worth a call to ask directly rather than guessing. This fits a landowner in or near that stretch of counties who has hardwood timber to sell, whether standing or cut, and wants someone who both buys logs and mills them. From uwharrielumber.com, read 10 October 2026.

Waste Wood Recycling, LLC is a timber buyer in Catawba, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Pulpwood and Land Clearing. It covers 6 counties, including Alexander, Burke, Caldwell and Catawba. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Watts Bumgarner & Brown Inc is a logging contractor in Taylorsville, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Wildcat Land & Timber, LLC is a timber buyer in Lenoir, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Softwoods and All Hardwoods. Products: Standing Timber, Sawlogs, Pulpwood and Woodland. It covers 32 counties, including Alexander, Alleghany, Ashe and Avery. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Williams Forest Products, Inc is a timber buyer and logging business based in Rock Hill. It buys standing timber, pulpwood and land from landowners, and its harvesting crews do the logging. The business has been assisting landowners for more than 25 years, and its professional staff has more than 60 years of experience combined. It serves landowners in Cabarrus, Catawba, Cleveland, Gaston, Iredell, Lincoln, Mecklenburg, Polk, Rowan, Rutherford, Stanly and Union counties. It buys both hardwoods and softwoods. Its typical minimum tract is 10 acres. It also usually waits until timber is at least 15 years old before harvesting it. The first step is a free assessment from the office or one of its timber buyers. The harvesting crews are TOP certified and use cameras and GPS units to monitor their trucks. The office provides "accurate weekly documentation" throughout the job. A registered forester, SC Registered Forester #1887, is part of the business. For reforesting, its professionals can help directly or put you in touch with someone in your area they would recommend. Williams Forest Products, Inc suits a landowner with 10 acres or more of mature timber in one of those counties who wants a free look at the timber's value and a paper trail of weekly updates during the work. From williamsforestproductsinc.com, read 16 October 2026.

Wood Forest Resources, LLC is a timber buyer in Wilson, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: Southern Yellow Pine, Ash, Red Oak, White Oak, Hickory, Sweetgum and Yellow Poplar. Products: Standing Timber, Sawlogs and Pulpwood. It covers 69 counties, including Alamance, Anson, Beaufort and Bertie. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Wood Harvest, Inc. - Catawba Co is a timber buyer in Monroe, North Carolina. It appears in the N.C. Forest Service, Companies that Buy Timber, county lists. Species: All Hardwoods and All Softwoods. Products: Standing Timber, Sawlogs, Chip-N-Saw logs, Pulpwood and Chips. It covers 11 counties, including Alexander, Anson, Burke and Cabarrus. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.