Mills

Dove Creek Forestry, Inc. Brian Curry is a forestry consulting business based in Elizabeth, Colorado. They work on forest stand improvement, forest fuels reduction, habitat improvement, and land clearing, and they've operated since 2008. The work runs in a few steps: you reach out by phone, email, or the contact form to set up a free on-site walkthrough, and from there they put together a formal quote with a plan for the work. Timber harvested from their projects goes to sawlogs, firewood, and mulch, which gets delivered to local mills, firewood distributors, mulching facilities, and private buyers. Their harvested timber comes from their own Colorado-based projects. They describe their approach to clearing this way: "We don't clear land aimlessly. Each case is individually assessed to decide how to best serve our clients and the land they're looking to improve." There's no stated minimum acreage or tract size for this business. This fits a Colorado landowner who wants forest health work done, fire fuels reduced, or land cleared, and who wants the person to walk the property with them before any numbers get put on paper. From dovecreekforestry.com, read 10 October 2026.

Morgan Timber Products Mark Morgan is a consulting forester. It appears in the Colorado State Forest Service, Golden Field Office Contractor list. A consulting forester works for the landowner, not the buyer. A listing here is not an endorsement.

White Elk Forestry LLC Christopher Scott works with Colorado landowners who have ponderosa, lodgepole, or limber pine on their property. It's owner-operated, run by a former wildland firefighter, and fully insured. The work is forestry and tree care rather than timber buying: wildfire mitigation, defensible space, mountain pine beetle mitigation, hazard tree removal, storm and windblown cleanup, forest health and fuels reduction, and work in steep or hard-to-reach ground. For mountain pine beetle, the approach starts with a property assessment to find infested trees, judge which stands are vulnerable, and plan removal and proper handling before the next beetle flight. The business says it is "built for small & mid-sized properties" and describes itself as "specialized in difficult access," which matters if your acreage includes steep slopes or tough terrain that other outfits pass on. It serves Colorado generally, with named work in Larimer, Boulder, Gilpin, Jefferson, Clear Creek, Teller, Park, Douglas, and El Paso County. This fits a landowner on Colorado's Front Range dealing with beetle-killed or fire-risk pine on land that's awkward to get equipment into, who wants someone to walk the property, explain what's happening to the trees, and handle removal properly rather than just dropping wood and leaving. From whiteelkforestry.com, read 10 October 2026.

Reed Mill & Lumber Co Inc is a mill in Denver, Colorado. It makes and distributes specialty moulded products and has done so since 1946. This is not a place that buys standing timber or sends someone out to walk your woods. It's a milling operation, working with softwood and hardwoods, offering services like milling to pattern, straight line ripping, trimming, resawing, ripping to width, wirebrushing, and custom tooling. That last one matters if you've got an unusual profile or a historical restoration piece in mind, since they say their equipment lets them "manufacture specialized tooling for unique or one-of-a-kind profiles and patterns." Reed Mill describes what it does plainly: it "offers a variety of milling services for softwood and hardwoods." The business is set up to work with architects, builders, designers, and building materials suppliers, not landowners selling logs off their property. If you're a landowner with timber to sell or trees to have logged, this isn't that kind of business. This fits someone who already has milled lumber, or specific timber, and needs custom milling, resawing, or specialty tooling work done on it, not someone looking for a buyer to come harvest standing trees. From reedmill.com, read 10 October 2026.

T C Woods is a sawmill and custom furniture shop in Fort Lupton, Colorado, serving Weld county. It isn't a timber buyer or logger. It's the place you go once the tree is down and you want it turned into boards. The work here is custom milling: "We provide custom milling of your logs with our bandsaw or chainsaw." They also re-saw cants at least 5 inches thick, and build custom furniture for people who don't have the time or tools to do it themselves. Their inventory runs over 20 species of hardwoods, all sourced locally from Colorado's urban forests. Logs need to be at least 10 inches across and 4 feet long for the bandsaw, and they ask that ends be painted within a day of cutting and the wood milled green. On the money side, "Fees generally work out to $1/board foot or better," with mill fees running $100 to $120 an hour depending on the log, and an $80 minimum. You can pay to have your lumber milled and take it all home, or trade some of the wood for the milling work. One thing to plan for: they don't pick up logs. You bring them to the yard at 5406 CR 23, or arrange transport through whoever fells your tree. This fits a landowner who already has a tree down, or a few logs set aside, and wants them turned into usable lumber or furniture rather than sold as standing timber. From tcwoods.com, read 10 October 2026.

Mountain Heart Woodworks is a sawmill and lumber yard in Elbert, Colorado. They process logs into lumber using their own band mill, working with loggers around the state to keep their log yard stocked with Colorado timber. They handle Lodgepole Pine (Beetle Kill Pine), Ponderosa Pine, Doug Fir, Engelmann Spruce, Aspen, and occasionally Juniper (Purple Heart Cedar). Their product line covers rough cut lumber, live edge slabs, tongue and groove, shiplap, and S4S, with both kiln dry and air dry options. They describe themselves as working closely with multiple loggers "to keep a full log yard of premium Colorado timber." They serve Elbert county. They are open to the public on Saturdays, with weekdays by appointment only. This is a mill and lumber supply operation rather than a service built around buying standing timber off a landowner's property, so if you have trees still growing and want someone to walk your land, this listing is more about what happens after the logs come out. It suits a landowner who already has logs ready, or who wants finished lumber products like siding, flooring, or beams milled from Colorado species. From mountainheartwoodworks.com, read 10 October 2026.

Golden West Pine Mills, LLC is a sawmill in Ault, Colorado. They produce rough sawn lumber, timbers and millwork, working with ponderosa pine and Douglas fir. They harvest their own timber and run it through their own remanufacturing facility, turning rough lumber into boards, beams, paneling, flooring, mouldings and doors. Their service list covers surfacing, sanding, ripping, moulding and resawing, each with its own minimum charge and per-foot pricing. Beyond the fixed mill in Ault, they also run a portable mill that works throughout Colorado, so they can come to timber rather than only working from the yard. They serve Weld County. They are a member of the Colorado Forest Products program and say "we guarantee that 100% of our wood products are harvested from Colorado forests." There is no stated minimum acreage for landowners bringing in timber. This outfit is built for the milling and finishing side of wood, not for walking a landowner through a standing timber sale. If what you want is someone to cut your logs into lumber or custom millwork, using wood that stayed in Colorado the whole way through, this is the kind of business to call. From goldenwestpinemills.com, read 10 October 2026.

Old Time Lumber is a sawmill in Boulder, Colorado. They don't buy standing timber or do any logging themselves. What they do is custom milling and planing, taking wood and cutting it to the dimensions you need. This is a place for after the trees are already down, not for finding someone to harvest them. If you've got logs or timber you need milled into lumber, you call ahead and set up an appointment with their woodworkers. They describe themselves as "the oldest operating sawmill on Colorado's front range," founded in the late 1970s by John Sainsbury, and they say they have "no plans to move." They serve Boulder and the surrounding area, including Jefferson County. No tree species, credentials, or pricing are mentioned, so call ahead with your questions on those. This fits a landowner who already has logs or rough-cut timber and wants it milled to size locally, not someone looking for a buyer for standing timber on their acreage. From oldetymelumber.com, read 10 October 2026.

Oaklands Ranch Sawmill is a saw mill in Sedalia, Colorado. The name matches Oaklands Ranch, a family property at 1613 N. Perry Park Road, where the Curtis family has been "living and working this same property" for over 150 years. It serves Douglas County. The ranch's pages carry the headings Wood Products and Christmas Trees, and the ranch also runs a tractor show, with the 2026 show set for June 20th. In its own words, the ranch is "proud to continue to serve our community with great products and services." This suits a landowner near Sedalia in Douglas County who wants to call a family property close to home and ask what the mill cuts and buys before deciding anything. From oaklandsranch.com, read 10 October 2026.

Denver Wood Slabs is a family-owned sawmill in Denver, Colorado. It mills and kiln-dries felled, urban trees into wood slabs, burls, and lumber, rather than buying standing timber from a landowner. If you've already had a tree come down, this is the kind of place built for that: custom milling and planing, re-sawing, surface sanding, stacking, and kiln drying, with a "Salvage Your Urban Tree" service to coordinate with your tree company. They work in walnut, ash, elm, oak, and locust. Unless you ask for green wood, everything goes through their vacuum kiln, which they say keeps the wood from cracking and clears out bugs. They serve Denver and run their shop from a warehouse at 4903 Washington Street. It's "Open by Appointment Only," so you call or fill out a form, bring your wood in or arrange a pickup, and talk through what you want milled, dried, or made. They've been at this since 2007, starting as a custom furniture company before adding mills and a kiln of their own. This suits a Denver-area landowner who has a tree already felled, maybe one that came down in a storm or a removal, and wants it turned into slabs or lumber instead of hauled off, not someone looking to sell standing timber for harvest. From denverwoodslabs.com, read 10 October 2026.

Allpine Lumber Company is a custom saw mill in La Jara, Colorado, working out of 19456 CR 17.2. They cut custom beams, rough sawn and dimensional lumber, tongue and groove, wall paneling, and flooring, along with log siding and house logs for new construction or for remodel and repair jobs. Species they work with include Englemann spruce (deadstanding or green), lodge pole pine, ponderosa pine, blue stain pine, douglas fir, white fir, and aspen. For repair work they ask customers to "bring us a sample and we will recreate what you need for your project." They also offer custom sizes and patterns on request, plus hardware, insulation, and stain and chinking products to finish out a job. They serve Conejos County. As they put it themselves, "As a custom saw mill, we probally make it," and if they don't, they say they probably know where you can get it. This fits a landowner who already has logs or sawn timber and wants a local mill to turn it into beams, siding, paneling, or flooring, rather than someone looking for help buying standing timber or logging a tract. From allpinelumber.com, read 10 October 2026.

Blanca Forestry Products is a mill in Blanca, Colorado. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Native Lumber, LLC is a sawmill in Rye, Colorado. It's a family-owned operation, now in its 4th generation, cutting lumber "the way it's been done for generations." They work in Ponderosa, White Fir, Douglas Fir, Engelmann Spruce, and Aspen. The mill handles rough sawn lumber, timber frame posts and beams, and custom building packages cut to order. Timber frame work goes up to 28 inches wide by 26 feet long. They also do fire mitigation work, for landowners whose "timber going wild and your brush a little too brushy." Beyond milling, they also do logging and land clearing or site work. Ordering is plain: you call, tell them what you need, and they take it from there. Orders over $1,000 need a deposit to get started. They work within about a 90-mile radius of their mill site in Rye, covering places like Colorado City, Pueblo, Westcliffe, Colorado Springs, Walsenburg, Trinidad, Alamosa, Lamar, and La Junta. They've been running since 2017. There's no stated minimum order size. This is a good fit for a landowner who wants custom-cut lumber, timber frame material, or mitigation work done by people milling it themselves, rather than a sawmill looking to buy standing timber. From nativelumber.co, read 10 October 2026.

Crooked Creek Timber is a mill in Rye, Colorado. It has a Google Maps business listing in that category. It is also listed as a logging contractor. A listing here is not an endorsement.

Colorado Timber Resources is a sawmill in Parshall, Colorado. It takes logs and turns them into premium commercial framing lumber, along with wood chips and shavings, using Colorado Lodge Pole Pine, spruce, and fir. It broke ground in 2012 in Grand County, Colorado. This is not a business set up to buy standing timber from a landowner. It sells to multinational businesses and commercial suppliers nationwide, supplying building materials for homes and multifamily complexes and pallets for moving goods. Minimum volume orders apply, and the mill states plainly that "we do not sell to individuals." If you want lumber products, the process is to submit a quote request and a sales representative follows up. There's no mention of a service that walks a landowner through a timber sale, no stumpage program, and no tract size requirement for sellers, since the mill isn't built around that kind of transaction. If you're a landowner with a few acres who wants to sell standing timber or get advice on logging your own property, this isn't that kind of operation. This fits someone further down the chain: a commercial buyer or supplier looking for bulk framing lumber, chips, or shavings out of Grand County, Colorado. From coloradotr.com, read 10 October 2026.

Ott's Sawmill is a sawmill and logging outfit in Mancos, Colorado. It is a small, family-run operation that has been cutting in Mancos for over 40 years, running a historic belt-driven circular sawmill. They serve Montezuma County. The work covers the whole chain: falling the trees, limbing them, hauling them out, and milling them. They mill strictly ponderosa pine, all to custom order, turning out dimensional lumber and timbers, hand-peeled log siding, D-logs, log beams, and carving products like custom steel plates and corbels. "All Order Sizes are Welcome," so whether you need a few boards or a full load, they'll take the job. Their timber comes from local thinning and timber management work, not from buying it in from far off. They describe it as sourcing "through small, sustainable thinning and timber management projects," which fits landowners doing stand improvement cuts rather than a clear-cut harvest. To get on their cut list, you call, text, or email and they get back to you. This fits a landowner near Mancos who wants custom-milled ponderosa pine lumber or log products from their own trees, done by a small local mill rather than a large commercial buyer. From ottsmill.com, read 10 October 2026.

Pawlicki & Sons Sawmill is a mill in Dolores, Colorado. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Urban Forest Mill is a sawmill in Longmont, Colorado. They take logs from trees that come down, often because of development, age, or disease, and mill them into lumber and slabs for builders, designers, and woodworkers along Colorado's Front Range. The work they take on includes custom wood milling, kiln drying, flattening, planing, and sanding, straight-line ripping and glue-ups, and epoxy planing and sanding. They work in live edge slabs as well as lumber and slabs more generally. In their own words, "we take trees from our community or from individuals and turn them into beautiful lumber and slabs so they can be preserved for decades to come." They also note that "even the most beautiful piece of wood has to be truly dry and flat before it can be transformed into your vision," which is the thinking behind their kiln drying and flattening steps. They serve Boulder County. This fits a landowner in Boulder County who has one or a few urban or yard trees coming down, not a woodlot or acreage of standing timber, and who wants those logs turned into usable lumber or slabs rather than chipped or hauled off. From urbanforestmill.com, read 10 October 2026.

JKC Woods, LLC is a sawmill in Longmont, Colorado that does custom milling for landowners in Boulder County. This is a mill business, not a timber buyer, so they work with logs you already have down rather than buying or harvesting standing timber. They mill Siberian Elm and Black Walnut, and the custom milling rate is $100 per hour, plus $15 each time the saw hits metal in a log. They say that works out to about $1 per board foot when sawing four quarter boards. They lay out a process for getting logs ready for them: fell the tree one day, buck and seal the logs the next, then mill on the third, though they note good results from logs milled more than two years after cutting. They describe themselves as wanting to be an "affordable, customer service oriented, milling option" for Boulder County. This fits a landowner who already has logs on the ground, maybe from clearing a lot or storm damage, and wants someone local in Boulder County to turn Elm or Walnut into usable lumber rather than someone to deal with standing timber. From jkcwoods.com, read 10 October 2026.

JAMCo Woodworks is a family sawmill in Olathe, Colorado, out on the Western Slope. They take logs, yours or ones they've sourced themselves locally, and mill them into beams, boards and slabs that end up as porches, ceilings and tables. This isn't a timber buyer or a logging crew; it's a mill you'd turn to once logs are down and you want them cut to size. They work mostly in Doug fir, spruce and pine for timbers and framing lumber, with walnut, ash, elm and sycamore on hand for hardwood slabs and mantels. If you've got logs to mill, you drop them off or line up a hauler yourself; logs need to be at least 8 feet long. Everything goes through their own Wood-Mizer, cut in "true dimension" so a 2x6 measures a full 2 inches, and they dry it in their own kiln. A quote usually comes back in about a business day, and orders over $1,000 need a 50% deposit to start. They don't deliver, but they'll put you in touch with a hauler. They serve the West Slope: Montrose, Olathe, Delta, Grand Junction, Ridgway, Ouray, Telluride, Gunnison, Crested Butte, Lake City, Durango, Silverton and the North Fork. JAMCo started as a construction company in 2015 before growing into the sawmill it is today, and they're a member of the Urban Wood Network. As they put it, the whole operation is about "logs to living." This suits a landowner who already has logs on the ground, or plans to have trees cut themselves, and wants a local mill to turn that wood into usable lumber rather than someone to buy standing timber. From jamcowoodworks.com, read 10 October 2026.

United Wood Products, Inc. is a sawmill in Longmont, Colorado. They serve Boulder County. They are a mill that manufactures wood materials rather than a logging or buying outfit, so this is a place to think about if you want logs turned into usable wood rather than someone to come harvest your trees. Their product list includes aspen logs, along with firewood, rough lumber, log rail systems, rounds, poles, posts, fencing, bedding and mulch, and tongue and groove stock. They say plainly, "we are unable to list the pricing since raw material supplies and freight are not consistent," so you would need to call or email with a take off list to get a quote. If you want something delivered, they ask that you "provide your address and tell us if it is going to a business, residence or jobsite." There is no stated minimum tract size, so it is not clear how small a job they would take on. This fits a landowner who already has logs or timber and wants them milled into lumber, rails, posts, firewood, or similar products, not someone looking for help getting trees harvested in the first place. From unitedwoodproductsinc.com, read 10 October 2026.

The Mill is a circular sawmill in Kremmling, Colorado. They don't buy standing timber or log your land, but if you've got trees coming down from fire mitigation, beetle-kill, or a storm, this is where that wood could end up becoming lumber. They cut rough cut lumber, live edge slabs, beams, and timber products, and they describe themselves plainly: "We are a circular sawmill making rough cut lumber, live edge slabs and timber products." They mill Lodgepole Pine, Douglas Fir, Engelmann Spruce, and Aspen, all sourced from local fire mitigation and watershed projects on public and private land. Services include custom cuts, hand peeling and hewing (done by hand, not machine), TPI grading, log processing and cutting, and delivery for $7 per loaded mile anywhere in Colorado. A 50% deposit is required for custom orders. Their lumber is graded to WWPA Western Lumber Grading Rules and inspected by Timber Products Inspection. They serve Grand County along with Routt, Summit, Eagle, Pitkin, and Jackson counties, naming Steamboat Springs, Breckenridge, Grand Lake, Silverthorne, Vail, and Aspen as places they reach. There's no minimum tract size stated for a landowner selling timber, since they don't run that kind of sale. For lumber orders, planed material and custom cuts do carry a minimum, though standard rough cut does not. This fits a landowner who already has logs down or trees cleared and wants them turned into usable lumber, not someone looking for a buyer or logger to come harvest standing timber. From themillcolorado.com, read 10 October 2026.

Mountain Home Wood Products is a mill in Drake, Colorado. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Greenleaf Forestry and Wood Products Inc runs a sawmill in Westcliffe, Colorado, and does forestry consulting and timber buying as well. "Wood products, tree service, and forest management are what we specialize in," is how they put it, and the work covers thinning and removal of overgrowth, fire mitigation and defensible space, insect and disease control for Ips and mountain pine beetles and mistletoe, nursery trees and tree transplanting, forest management plans and Community Wildfire Protection Plans, firewood cutting programs, cutting view corridors, brush and slash clean up, road and trail maintenance, and fencing. They work with ponderosa pine, Douglas-fir, bristlecone pine, white fir, and blue spruce. A job starts with their forest inspection service, which they call the best way to begin active forestry on a property. They say they pay for removed wood at market value or offer credits to help offset the cost of the work, and that ongoing work comes with return visits year after year, an annual review of the plan, and discounts on products at their Westcliffe sawmill. They serve Custer County and have been creating wood products and managing forested properties since 2003. This fits a landowner who wants one outfit to walk the property, handle the fire risk around the house, and take the timber and firewood off at the same time, rather than hiring separate people for each piece. From greenleafforestry.com, read 10 October 2026.

Royal Gorge Slabs & Sawmill LLC is a mill in Fremont County, Colorado. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Redemption Mill is a mill in Hotchkiss, Colorado. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Custom Woodworking - Colorado Springs Sawmill at Penrose CO is a mill in Penrose, Colorado. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Aspen Wall Wood is a sawmill in Dolores, Colorado. It was started in the mid-'70s making primarily pine paneling and lumber, then moved into Aspen in the 80s and has spent years perfecting that process. The work covers harvesting, milling, and producing Aspen wood paneling, along with firewood, wallplank, shavings, and other Aspen wood products. Aspen is the species they work with, and their own words call the company "the original Aspen paneling facility and established leader in harvesting, milling and producing sustainable Aspen wood paneling." They list Montezuma County as served. Products move out "directly from our lumber yard, local lumber stores and a variety of major distributors," so this is a mill with an established sales channel rather than a one-off buyer showing up on your land. There's no stated minimum acreage, and no mention of buying standing timber or working directly with landowners on a timber sale, so if you're a landowner with a stand of Aspen wanting to know who'd cut and mill it, you'd want to call and ask how they source their logs. This fits a landowner near Dolores with Aspen timber who wants to reach an established Colorado mill with decades in the Aspen paneling business, rather than someone looking for a full-service timber sale walked through step by step. From aspenwallwood.com, read 10 October 2026.

Robinson Sawmill lumber LLC is a mill in Weston, Colorado. It has a Google Maps business listing in that category. A listing here is not an endorsement.

McComb Lumber LLC is a sawmill in Cañon City, Colorado, and it serves Fremont County. It has been family owned and operated since 1978. This is a full-service sawmill working mainly in Pine. The main focus is rough cut lumber, used in barns, fences, landscaping, and similar work. They also do log siding, tongue and groove, and custom orders, and they make use of what's left over, turning it into cut firewood, animal bedding, wood chips, and landscape bark for both large and small consumers. As they put it, "We utilize all of our by-products." There's no mention of buying standing timber or logging a landowner's land, so this isn't the place to call about a timber sale itself. It fits better once you've got logs or trees down and want them cut into lumber, or if you're after firewood, bedding, chips, or bark in bulk or by the pickup load. From mccomblumber.com, read 10 October 2026.

Mountain Pine Manufacturing is a mill in Craig, Colorado. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Craig Sawmill is a small sawmill in Craig, Colorado, run by Mountain Pine Manufacturing. It turns beetle-kill pine and aspen logs into lumber and wood products, and says it is "helping to mitigate the risk of wildfires in our area" by using beetle-kill pine. What they make: rough sawn lumber, fence products, firewood, erosion control stakes, survey and garden stakes, bark mulch, tongue and groove boards, and garden beds. Pine is the main wood, with aspen hardwood logs also used for some products. Orders are "custom cut when ordered and are actual measurements." To get things moving, you text them a lumber take-off and they call you back, and picking up at the mill in Craig will speed your order along. Craig Sawmill serves Moffat County and describes covering the area around Craig, including Hayden, Milner, Steamboat Springs, Maybell, and Baggs, Wyoming. This fits a landowner near Craig who already has logs or beetle-kill pine down and wants it cut into usable lumber, fencing, stakes, or mulch, rather than someone looking for a buyer to come harvest standing timber off their land. From craigsawmill.com, read 10 October 2026.

BVR Sawmill llc is a mill in Delta, Colorado. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Badger Custom Sawmill & Kiln is a sawmill and woodworking shop on Highway 24 in Lake George, Colorado. It mills and dries wood rather than buying standing timber or running logging jobs, so if you have logs or trees down and want them turned into something, this is who you'd call. The work covers "kiln dried & surfaced/planed live edge slabs" in more than 20 species of hardwood and softwood, plus rough cut dimensional lumber, firewood, and finish work and custom furniture, everything from tables and counters to cutting boards. Their dimensional lumber comes mainly from local Douglas Fir, with kiln dried hardwoods also on offer. Firewood runs from full cord local softwood for heating to hardwood bbq smoking species like hickory, pecan, mesquite, and oak. The furniture side is built from "responsibly sourced wood." They serve Lake George and Park County. No credentials or years in business are stated, and no minimum size for a job is given. This fits a landowner who has already got logs or wants a custom slab, lumber, or furniture piece made, not someone looking to sell standing timber off a few acres. From badgersawmill.com, read 10 October 2026.

Blackheart Sawmill and Woodworks, LLC is a woodworking business in Canon City, Colorado, at 917 Grand Ave. It sells finished woodwork online under the name Blackheart Woodworks. Canon City is in Fremont County. The shop lists red cedar cup coasters, sets of 4 for $20, and black and purple epoxy coasters, sets of 4 for $75 each. It also lists wall pieces, including a support line flag coat rack at $175 and a support line flag vest duty belt rack at $225. Orders ship by UPS, USPS, or FedEx. Handling usually takes 1 to 2 weeks, and sometimes longer for large pieces or when orders pile up. It suits a landowner who wants finished red cedar pieces made in Canon City, such as gifts or keepsakes from their own trees, rather than someone to buy standing timber or log a tract. From blackheart-woodworks.square.site, read 10 October 2026.

Casey's Lumber is a mill in Woodland Park, Colorado, family owned and operating since 1985. It works out of its mill on State Highway 67 and serves Teller County, with its owners calling it "the most diversified mill in the state of Colorado." The work here is lumber, not standing timber. Casey's Lumber offers Home Lumber, Commercial Lumber, and Multi-Purpose Lumber, built for both small-town jobs and larger commercial projects. It serves the mountain towns and the Front Range, naming Colorado Springs and the Denver Metro Area as part of that reach. This is a long-running, family-run mill rather than a timber buyer or logging outfit, so it suits a landowner who already has lumber needs, building supplies, or a commercial project, rather than someone looking to sell standing timber off their acreage. From caseyslumberinc.com, read 10 October 2026.

Markit! Forestry Management is a logging contractor in Colorado Springs, Colorado. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Paulsen lumber is a mill in Park County, Colorado. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Granby Sawmill LLC is a mill in Granby, Colorado. It has a Google Maps business listing in that category. A listing here is not an endorsement.

High Desert Timber Frames and Custom Cut Sawmill is a mill in Craig, Colorado. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Pueblo Wood Products is a sawmill in Pueblo, Colorado, at 1110 E Northern Ave. It buys timber from regional loggers and also runs its own logging and forest management work, so a landowner could end up dealing with them either as the mill at the end of the chain or as the ones doing the cutting. The work covers fire mitigation and forest management on "private, state, or federal lands," and they say they're "fully mechanized." Their stated process is simple: cut to the landowner's specification, remove and market the wood, and let the remaining forest regenerate. They say they strive to use 100% of every tree cut, turning what's not sawn into bark, woodchip, sawdust, soil amendments, biochar, and firewood. No species are named, and there's no set price list, they ask that you call for rates and specifications. They list Pueblo County as served. The sawmill side was established in 2006 to handle smaller diameter timber from regional Colorado forests, mostly producing pallet boards. The broader company goes back to 1988, when it started as a family pallet and crate manufacturer and grew from there. This fits a landowner in or near Pueblo County who wants one outfit that can both log the trees and take the wood, especially if some of what's coming off the land is smaller diameter timber that a straight sawlog buyer might not want. From pueblowood.com, read 10 October 2026.

Old School Sawmill Co is a sawmill in Cortez, Colorado. They cut true dimensional rough-cut lumber to order, working in boards, beams, slabs, firewood, and logs, with delivery offered. They serve Montezuma County. They mill thickness from 1/4 inch up to 22 inches, and lengths from 8 to 25 feet. Board foot pricing starts at $0.95, with the price rising as width and length go up. For firewood, they offer rounds and cut-off slabs cut at firewood lengths, with delivery available. They say "we keep a small stock of boards on hand and save the bulk of our logs for your order," so most work is cut to what you ask for rather than pulled off a shelf. If you want work done, their process is simple: "the more detail the better: what you need, how much, and when." No species are named, and nothing is said about buying standing timber or harvesting and hauling logs off your land. This sounds like a mill set up to cut lumber you bring or order, not a service that comes out to log your acreage. This fits a landowner who already has logs down, or who wants specific dimensional lumber, beams, or slabs cut to order, and who is near Cortez or Montezuma County. From oldschoolsawmill.com, read 10 October 2026.

Muscanell Millworks, Inc. is a mill in Cortez, Colorado. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Just Rustic - Sawmill is a mill in Weldona, Colorado. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Alp Group LLC is a mill in Rifle, Colorado, serving Garfield County. It saws and makes a wide range of wood products, including lumber, beams and timbers, timber frame, logs, log homes and house logs, and exterior buildings. It also makes flooring and paneling, siding and decking, posts, poles and fencing, molding and millwork, furniture, firewood and fuelwood, and animal bedding. The business describes its work as "high quality log and timber installation and sales." It handles structural and non-structural woods, along with log and timber trusses, stairways, hand rails and entry arches. It also has in-house specialty wood moulding and shaping. A good fit for a Garfield County landowner whose logs or timber are headed for log homes, timber frame, furniture or finished millwork rather than firewood.

Anthony Moore is a mill in Alamosa, Colorado. It appears in the Colorado State Forest Service, Colorado Forest Products Database (lumber, logs, timbers, posts producers). Products: Beams & Timbers, Blue Stain, Exterior Buildings, Firewood & Fuelwood, Furniture, Landscape Ties, Log Homes & House Logs and Logs. A listing here is not an endorsement.

ArborScape is a tree care company based in Englewood, Colorado, serving the Denver Metro Area and along the Front Range. It has been in business for over 20 years. Its crews remove, trim and spray trees, grind stumps, deliver mulch and treat for emerald ash borer, for residential and commercial properties. Silver maple and crabapple trees are among the work it has done. The wood from that work gets used, so that "every part of the tree is utilized." Its wood products include lumber, beams and timbers, logs, firewood, furniture, wood chips and wood mulch. The company employs ISA-Certified arborists, one of whom is qualified in ISA TRAQ tree risk assessment, and certified journeyman arborists oversee its crews. It is licensed and insured. Estimates are free. An estimator looks over the tree, its roots and the targets around it during the first consultation, then writes a proposal covering the full scope of the job. It suits a homeowner or commercial property owner in the Denver area who needs trees removed or trimmed and would like the wood put to use. From arborscapeservices.com, read 3 November 2026.

Autumn Tree Lawn and Landscape is a family-owned business in Wheat Ridge, Colorado, that does tree care and lawn work and also mills wood. It has served the Denver metro area since 2017. It works in Jefferson County and in towns such as Arvada, Golden, Lakewood, Littleton, and Westminster. Its tree crews handle pruning, tree removal, stump grinding, emergency work, and plant health care. The company's arborists are certified and licensed through the Department of Agriculture and the International Society of Arboriculture, and the business is fully licensed and insured. Every job starts with a free estimate. On the wood side, the milling operation makes beams, timbers, and raw slabs, and it takes logs. The firewood and recycling yard in Wheat Ridge offers firewood, logs, wood chips, and mulch. The business calls its urban tree work "a unique selection of wood," with oak, locust, fruitwood, hardwoods, and piñon pine among it. It suits a Jefferson County landowner who needs trees pruned or removed and wants the usable wood milled into beams, timbers, or firewood by the same firm. From autumntreell.com, read 3 November 2026.

Byers Lumber & Forest Products is a mill in Twin Lakes, Colorado. It appears in the Colorado State Forest Service, Colorado Forest Products Database (lumber, logs, timbers, posts producers). Products: Blue Stain, Beams & Timbers, Firewood & Fuelwood, Lumber, Molding & Millwork and Posts Poles & Fencing. A listing here is not an endorsement.

Chainsaw Bob is a mill in Bailey, Colorado. It does custom milling of timbers, mantels, bar and countertops, and thin cuts for bent-wood and spiral laminations. Its products are beams and timbers, blue stain, and specialty products. It serves Park. The business also runs an independent chainsaw repair facility, and it is not a dealer. The shop has a Stihl Gold Level tech and is Husqvarna certified. This suits a landowner in Park who wants timbers or beams milled to order for a building project, or who wants a chainsaw serviced by an independent shop.

Colorado Rock*N Logs Inc. is a mill in Penrose, Colorado, and it works in Fremont. It makes beams and timbers, furniture, logs, lumber, and specialty products. Its furniture is made from environmentally friendly materials, and the work stays "true to the rustic cabin lifestyle." The company also offers its designs to do-it-yourselfers, so a handy owner can build the pieces at home. The business also wants to help new furniture designers develop their craft and share functional works of art with others. It suits a landowner interested in rustic log furniture and cabin pieces, or a do-it-yourselfer who wants a plan for building them.

The Colorado Timberking Corp. is a sawmill and woodworking shop in Peyton, Colorado, serving El Paso County. Eric and Teresa Greene established the company in 2016. They had already started Greeneco Hardwoods, a hardwood flooring business, in 1993, and the sawmill was added to that line in 2016. The company holds a licensed residential contractor credential. The mill runs a sawmill, a planer, a 4 head moulder and a sander, and it dries lumber in a Nyle dehumidification kiln. It makes posts, beams, T&G products for floors, ceilings and walls, trim, rustic mantels, live edge slabs and rough sawn lumber. Its listed species include Russian olive wood, Douglas fir and split pine firewood. Its products are made primarily from "Colorado forest fire mitigation logs," firewood and fence posts among them. Beyond milling, it does timber framing, hardwood flooring services, new home construction, and remodeling of kitchens, baths and basement finishes. It also builds custom countertops, fireplace mantels and wall art. It suits a landowner who wants wood cut into finished lumber, flooring, mantels or posts in El Paso County, and who would like one shop to carry the work from the mill through to the finished piece. From coloradotimberking.com, read 10 October 2026.

Colorado Wood Company Inc. is a mill in Olathe, Colorado. It appears in the Colorado State Forest Service, Colorado Forest Products Database (lumber, logs, timbers, posts producers). Products: Beams & Timbers, Compost, Firewood & Fuelwood, Logs, Lumber, Posts, Poles & Fencing and Wood Chips. A listing here is not an endorsement.

Deerwood Forest Products Co. is a mill in Evergreen, Colorado. It makes firewood and fuelwood, landscape ties, posts, and poles and fencing. For firewood, it sells logs cut to 4 to 6 foot lengths, in diameters from 6 to 15 inches. Logs up to 10 inches across sell for $1.50 per linear ft, and larger logs sell for $2.00 per linear ft. A 5 foot log 10 inches across will produce about 16 pieces of split firewood. Deerwood Forest Products Co. suits a landowner who wants firewood logs or posts and fencing made, and who wants the price per linear foot in front of them before deciding.

EZTrail LLC is a mill in Del Norte, Colorado. It is a locally operated firewood business that processes and supplies firewood and fuelwood, and it also handles logs. It serves the San Luis Valley in southern Colorado, and its listed county is Rio Grande. About 70 percent of its firewood comes from the Rio Grande National Forest, where it harvests and processes wood. Its customers include residential buyers, businesses and surrounding communities. Its stated aim is "a dependable local firewood supply," along with service and heating resources for customers throughout the valley. It suits a landowner in the San Luis Valley whose main interest is firewood or fuelwood for local heating.

Fairplay Forest Products is a mill in Fairplay, Colorado. It makes firewood and fuelwood, logs, and wood chips. Its work is active harvesting of standing dead aspen and pine, carried out under a state forest management plan to lower fire danger, bring up new growth, and improve wildlife habitat. The aspen logs stand out. Many carry scars, scrapes and "character" from elk and deer, which draws furniture makers and craftsmen. Most of the logs need no splitting and are easy to carry. The firewood is dried aspen, and dried aspen logs "burn hot and clean." It suits a landowner with dead aspen or pine on the property who wants those trees cleared and the wood put to use, or a craftsman looking for aspen logs with real character.

ForestWise LLC is a forest and land work business in southern Colorado, formerly known as M S Forest. It does forest thinning, dozer work, and land management and reclamation. Kassie Carley runs the business with her crew, and it has 20 years of history behind it. Its work has included projects with the Natural Resources Conservation Service, the Colorado State Forest Service, the Colorado Division of Wildlife, and private landowners. That work has aimed to improve wildlife habitat, watershed, and grazing land, and to remove damaged or infected trees from national forest land. The business makes logs, firewood and fuelwood, wood chips, animal bedding, and specialty products. This one suits a landowner who needs thinning, dozer work, or reclamation done on a property in southern Colorado, and who cares about habitat, watershed, or grazing ground as much as the timber itself.

Foxfire Fuelwood inc. is a mill in Colorado that serves Routt County. It makes firewood and fuelwood, and it also produces logs, posts, poles and fencing, along with Blue Stain and holiday trees and transplants. Its fuelwood is "properly processed, aged and measured," sold by the cord and in bundles, and cut from lodgepole pine, aspen and pinion. Fence posts and rails, sawlogs and Christmas trees for the holidays round out the list. Foxfire also does fuel treatments such as tree thinning, pruning and chipping, builds fuel breaks, and clears access and defensible space for emergency responders. Its background includes a recent category 1 hotshot foreman with 15 years of experience. It suits a Routt County landowner who needs thinning, pruning or a fuel break done on their place, or who wants firewood, posts or fencing material.

Frontier Log Homes is a licensed general contractor in Montrose, Colorado, and has been building homes on Colorado's Western Slope since 1977. It designs and builds custom log homes, timber frame homes, hybrid homes, and conventional custom homes with log and timber features. The work is "handcrafted and fitted in Colorado," with log and timber pieces made in Montrose, numbered, delivered, and assembled on a prepared foundation. Every project starts with a Design Contract, which develops or refines the floor plan, construction style, major features, site considerations, and next steps. From there an owner can choose a log package, dry-in work, turn-key construction, a hybrid or timber frame build, or an addition to an existing log home. Turn-key and general contracting are limited to approved areas on the Western Slope, including Montrose, Ridgway, Ouray, and Telluride. Log packages and consultation are available to clients across the United States. The company has also handled helicopter-supported installation on difficult mountain sites. Frontier Log Homes does not offer timber sales, timber buying, logging, or forest management to landowners. It suits a landowner who already has a building site and wants a log, timber, or hybrid home designed and built on it, not someone to buy the standing timber. From frontierloghomes.com, read 10 October 2026.

Green Mountain Timber Salvage is a mill in Mosca, in southern Colorado. It makes firewood and fuelwood, logs, wood chips and wood mulch. The LLC describes its purpose as "managing the great resource of our forest." The business began by felling trees in the Northwest. It then moved back to Colorado, worked in arborist work, and later moved into fire mitigation and thinning. It serves all of Colorado, northern New Mexico, northern Arizona and northwest Oregon. The county it serves is Saguache. This suits a landowner in Saguache or elsewhere in southern Colorado who wants firewood, logs, chips or mulch from the trees on their land.

Halpin Wood Works is a mill in Fairplay, Colorado. It cuts, mills, and produces custom wood, including beams and timbers, lumber, logs, furniture, and specialty pieces. Its work runs to wide-slab "tree board," tables, mantels, totem poles, benches, log gates, carvings, decorative stumps, wood burning art, and chainsaw carving. It supplies custom wood to furniture makers, designers, log home builders, and individual homeowners. The mill works with lodgepole pine, aspen, ponderosa pine, limber pine, and bristlecone pine, all standing dead. It cuts no live trees, only dead ones. This suits a landowner with standing dead lodgepole, aspen, or pine who wants that timber milled into beams, lumber, or finished pieces.

Hard Up Lumber is a sawmill in Colorado, and it has more than 46 years of logging experience. That work follows forest management guidelines set by the Colorado State Forest Service. The mill saws rough-cut lumber in 1x6s, 2x4s, 4x4s, 6x6s and 8x8s, and it cuts custom beams. Some of the lumber is blue-stained throughout. It also makes saw logs, house logs, character logs, round fence posts and poles, and hand-peeled fence materials. Other products include mantles, barn poles, building timbers, log accents and firewood. It takes custom orders for hearths, table tops, benches and furniture. This mill suits a landowner who wants trees turned into finished lumber, beams, posts or log home material, and who wants custom pieces made to order.

J.C. Custom Design Works is a mill in Aurora, Colorado. It appears in the Colorado State Forest Service, Colorado Forest Products Database (lumber, logs, timbers, posts producers). Products: Blue Stain and Lumber. A listing here is not an endorsement.

KC Wood Products LLC is a wood products business in Florissant, Colorado, serving Teller County. It helps people mitigate their property and clean up burnt and beetle-kill trees. The wood is recycled into natural fuel such as firewood. Wood that is millable goes to lumber mills and pallet companies. The business makes firewood and fuelwood, lumber, pallets and crates, and specialty products. It is a Colorado company that believes in using these resources. Its aim is "complete customer satisfaction while protecting the environment." This business suits a Teller County landowner who has burnt or beetle-killed trees to clear and wants that wood put to use, whether as firewood or as logs for a mill.

Michael Davis Inc. is a mill in Conifer, Colorado. It does forest management and fire mitigation work, and it makes wood products. Its range includes log poles, log railings, log furniture, firewood, and Christmas trees. It also makes timber frame pieces, landscape ties, posts, poles and fencing, wood chips, and wood mulch, along with art and novelties, holiday trees and transplants, and specialty products. The forest work is described as "forest management and fire mitigation." The company serves Jefferson County. It suits a Jefferson County landowner who wants fire mitigation done on the land and would like the wood put to use, whether as firewood, fencing, or log products.

Mikeys Millworks is a woodworking shop in Franktown, Colorado, in Douglas County. It builds cabinets, built-ins, furniture, bookcases, shelves, trim, wardrobes and vanities, and it also repairs and updates existing pieces. Its main work is what it calls "primarily wood based products." It works with solid wood, exotics, veneers, plastics and metals, and the species it names are cherry, oak, walnut and mahogany. Mikeys Millworks does not buy standing timber, stumpage, tracts or logs from landowners. Its jobs start with a written statement of work covering product details, timelines, materials, site access and who makes decisions during each phase. Payment is generally 50 percent before work begins, with the rest due over delivery and installation. It is insured through The Hartford at $1,000,000, and the policy coverage is emailed to the client directly. About 98 percent of its finishes are water based. The shop also offers design consultation and can work with other trades for plumbing, electrical and framing. It suits a homeowner in Douglas County who wants a closet, pantry, vanity or set of cabinets built in cherry, oak, walnut or mahogany, not a landowner looking to sell trees. From mikeysmillworks.com, read 3 November 2026.

Mountain Valley Lumber is a sawmill in Colorado that serves Saguache County. It makes dimension lumber and studs, aspen paneling, and Douglas-fir flooring. Its blue-stain lumber can be supplied rough-sawn, plane surfaced, tongue-and-groove, or as beams. The business has been building for over 30 years, from sheds up to custom log homes. Its work includes log homes, pre-built and kit cabins, portable sheds, timber frame homes, and custom logs cut to a buyer's specifications, from a 50 ft log to a U-log. The timber it works with is aspen and pine. In its own words, "the sky is the limit." Mountain Valley Lumber suits a landowner in Saguache County who wants a cabin, shed or log home built, or who needs logs cut to a set length, rather than one looking to sell standing timber. From mountainvalleylumber.com, read 10 October 2026.

Mourning Reclaimed Wood is a woodworking business in Loveland, Colorado. It makes furniture and décor from reclaimed wood. Its bed options are headboards, footboards, mattress platforms and storage bed platforms. It also builds end tables, nightstands, desks, benches, dining tables, pet stairs, kennels and wall art. The business also runs milling equipment: a 72-inch slabber mill, a band sawmill and a 96-inch Alaskan sawmill. It does portable milling, log hauling, live edge slabs and barn dismantling. Its listed products include lumber, beams and timbers, logs, molding and millwork, firewood and pellets. Its own pages describe each piece as "Unique and one of a kind." Accent walls made from 100% reclaimed wood are also part of the work, along with tables and desks for kitchens and offices. It does not buy standing timber or offer timber sales. It suits a landowner who already has old barn boards, a fallen tree or a live edge slab and wants it turned into a bed, table or accent wall, not a buyer for standing timber. From mourningreclaimedwood.com, read 10 October 2026.

Redstones Timber Frames Inc. is a mill and timber frame builder in Pagosa Springs, Colorado. It cuts beams, timbers, lumber, logs, and molding and millwork, and it builds custom timber frame homes and structures. It also makes stackable timber building packages on CNC machinery. The business covers Archuleta County and SW Colorado. Its wood comes from beetle-killed, standing dead Engelmann Spruce and fire-damaged trees, sourced locally from the San Juan Mountains. The business also offers harvesting, forest stewardship and wildland fire mitigation work. Every part of the harvest is used, leaving "zero waste behind." Redstones has been building timber frame homes for over 10 years. It works with local loggers and sawmills to take timber from the forest through to finished wood. This suits a landowner in Archuleta County who has beetle-killed or fire-damaged spruce and wants it milled close to home, or who wants wildland fire mitigation work done on the land. From redstonestimberhomes.com, read 10 October 2026.

Richard Drake is a mill. It appears in the Colorado State Forest Service, Colorado Forest Products Database (lumber, logs, timbers, posts producers). Products: Firewood & Fuelwood, Log Homes & House Logs, Lumber, Posts and Poles & Fencing. A listing here is not an endorsement.

Rocky Mountain Log & Saw Co. LLC is a logging business just outside Fort Collins, Colorado. It does custom logging for beetle-killed or burned tree removal, right-of-ways, and tree thinning across the Colorado front range and mountain areas. It also does fire mitigation and forest thinning, and it can load and haul logs with its own truck-mounted loaders and log trucks. The business was established in 2006, and the owner has been logging and selling firewood for over 25 years. Chad Uthmann started cutting and selling firewood at 18, and now he is training his two teenage sons in the operation. It is a small, family-owned and operated business. It runs older equipment, particularly Caterpillar machines, and it takes on large and small jobs in the Colorado mountains. Besides logging, it processes firewood and hand-peels logs, and it makes landscape ties, posts, poles, and fencing. It offers "free estimates" for beetle-killed tree removal, fire mitigation, forest thinning, and other work, and it has logged and hauled out burned trees from the High Park Fire. It suits a landowner in the Colorado front range or mountains who needs beetle-killed or burned trees taken down, a right-of-way cleared, or a stand thinned, and wants a local crew that can haul the logs out. From logandsaw.com, read 3 November 2026.

Rocky Mountain Timber Products Inc. is a mill in Del Norte, Colorado. It appears in the Colorado State Forest Service, Colorado Forest Products Database (lumber, logs, timbers, posts producers). Products: Beams & Timbers, Blue Stain, Firewood & Fuelwood, Flooring & Paneling, Landscape Ties, Log Homes & House Logs, Logs and Lumber. A listing here is not an endorsement.

San Juan Structures Inc. is a custom home builder in Silverton, Colorado. It builds log homes, timber frame homes and conventionally framed homes, and it also handles restorations, remodels, commercial construction and land development. Its work covers Southwest Colorado, from Durango to Pagosa Springs and Telluride. The log homes are built from local natural standing dead timber, which the firm calls "a continual renewable resource." The timbers in its timber frame homes are recycled. It does not use kits or factory-built logs, and its craftsmen select and fit each log by hand. Most log homes are pre-built at its yard just north of Silverton, and it can build on the owner's site when there is enough room. Its services include pre-design consultation, construction management, owner representation, and design and cost analysis. Before the first shovel of dirt goes in, the team sets a full specification for everything, so the build can run at a steady pace. Clients who live out of town get photos and updates by email. San Juan Structures Inc. suits a landowner who wants a custom home built on their land, or a log or timber frame home made from local timber, rather than a buyer for standing trees. From sanjuanstructures.com, read 10 October 2026.

Sawatch Home & Hut is a mill in Nathrop, Colorado. It runs a portable sawmill, a Wood-mizer, that turns locally sourced pine and spruce into "custom-built projects." The mill can handle logs up to 41 inches in diameter. Most of its output is rough-sawn. That covers graded lumber, counter top slabs, siding, live-edge custom pieces, and other custom products. If you want a slab with the bark edge left on for a table or bench, this is the kind of work it does. Because the mill is portable, it can reach timber in remote sites across the state. This suits a landowner with pine or spruce in a stand that is hard to get to, who wants the logs sawn into lumber, slabs, or custom pieces.

Shreiner Enterprises is a mill in Laporte, Colorado. It appears in the Colorado State Forest Service, Colorado Forest Products Database (lumber, logs, timbers, posts producers). Products: Animal Bedding, Blue Stain, Compost, Firewood & Fuelwood, Furniture, Log Homes & House Logs, Logs and Lumber. A listing here is not an endorsement.

Stonertop Lumber is a mill in Montezuma County, Colorado. It appears in the Colorado State Forest Service, Colorado Forest Products Database (lumber, logs, timbers, posts producers). Products: Beams & Timbers, Compost, Firewood & Fuelwood, Log Homes & House Logs, Posts, Poles & Fencing and Wood Mulch. A listing here is not an endorsement.

Studs Lumber Company is a lumber yard at 29660 US 160 East in Durango, Colorado. It sells framing lumber, trusses, millwork, and doors and windows, mostly to builders and contractors. The business opened in 2014 and serves La Plata County. The founder, Russ Gartner, holds a forestry degree and had 20 years of lumber sales experience when he opened the yard. The yard carries mill rough pine, aspen T&G and blue stain pine, which it buys direct from the mills that produce them. Its studs are milled by Neiman Forest Products in Montrose, and the yard describes its millwork as locally harvested mill rough pine, bluestain and aspen T&G. It suits a Durango-area landowner who wants to know where local pine and aspen lumber goes after the mill, and who is looking for a lumber yard rather than a buyer for standing timber. From studslumber.com, read 10 October 2026.

Summerhill Tree Farm is a mill in Loveland, Colorado. It appears in the Colorado State Forest Service, Colorado Forest Products Database (lumber, logs, timbers, posts producers). Products: Firewood & Fuelwood, Holiday Trees & Transplants, Posts and Poles & Fencing. A listing here is not an endorsement.

Teton West Lumber Inc. is a mill in Fort Collins, Colorado. It appears in the Colorado State Forest Service, Colorado Forest Products Database (lumber, logs, timbers, posts producers). Products: Blue Stain, Landscape Ties, Log Homes & House Logs, Lumber and Pallets & Crates. A listing here is not an endorsement.

Timber Age Systems Inc. is a manufacturer in Durango, Colorado, that makes panelized buildings. It serves Montezuma County in southwest Colorado. Its building panels use Ponderosa Pine CLT, and its panelized system is called TAMBS, short for Timber Age Modular Building System. The company's aim is to help people build "a beautiful and durable high-performance home using materials you love and methods you respect." Its projects include a backyard office unit in Durango, a library for Battle Rock Charter School in Montezuma County, a sauna in Crested Butte, and a farmhouse outside Boulder. The company works alongside designers, engineers and general contractors. It does not act as the general contractor, and it does not manage installation once panels reach the building site. It does not offer timber cruising, timber buying, logging or harvesting. A landowner who wants to sell standing timber or have trees cut will need to look elsewhere. It suits a landowner who wants a home or outbuilding built from Ponderosa Pine panels and already has a builder or designer to handle the site work. From timberage.com, read 10 October 2026.

TimberScapes is a mill in Windsor, Colorado. It appears in the Colorado State Forest Service, Colorado Forest Products Database (lumber, logs, timbers, posts producers). Products: Blue Stain, Firewood & Fuelwood, Logs, Posts, Poles & Fencing and Specialty Products. A listing here is not an endorsement.

TJ's Log and Timber is a log home builder and log mill in Bailey, Colorado, on Highway 285. The firm traces its start to 1980, when Jason and Terri began TJ's Wood Products, and it says it has been building for over 45 years. Its log mill sits on 10 acres in Pike National Forest, where all of its logs are processed. It takes on custom log homes of any size, along with log walkways, bridges, archways and entry gates, log railings and deck posts, log fencing and custom log furniture. The register also lists log trusses, beams, stairs, posts and poles, including products made from beetle-kill, blue-stained pine. The firm has contracted with the USFS to log sections of forest in Colorado, and it oversees its manufacturing from beginning to end. Every home log is inspected and grade stamped onsite by TPI (Timber Products Inspection, Inc.), its certified inspector. Its own heading reads "Our Log Mill is Part of the Forest." The company is family-owned and serves Park County. This suits a Park County landowner who wants a log home, log railings or fencing built from Colorado logs, rather than someone to sell standing timber to. From tjslogandtimber.com, read 10 October 2026.

TM Grand County Inc., which works as TM Fencing and TM Timbers, is based in Granby, Colorado, in Grand County. It has been in business since 2006 and is owned and run by two Colorado natives, Jonas Pearson and Ehren Samuelson. Its work covers residential and commercial fencing, custom gates, entryways and railings, and low impact logging. The logging is "carried out manually without the use of machinery." The logging centers on lodge-pole pine, and the business turns that pine into custom fences and railings, including buck and pole fencing. It also offers climbing services for trees in precarious places. Logging prices vary with the quantity and size of trees and with the location. The business also sells firewood, bundles, and fence rails and stays to stores and campgrounds. New fence projects come with a 4-year guarantee. The base is in Granby, and the business names Winter Park, Fraser, Grand Lake and Kremmling among the Grand County towns it serves. It suits a Grand County landowner with lodge-pole pine who wants the trees taken down by hand and would like the wood turned into fence or railings. From tmfencing.com, read 3 November 2026.

Top Notch Logworks Inc. is a custom log and timber company in Gypsum, Colorado, in Eagle County. Its office and production yard are at 4722 Hwy 6. It has been in business for over 21 years. It builds log homes, timber frames, log and timber accents, log railing and log stairs, and it restores and maintains existing log homes, including log rot mitigation and chinking and sealing. Its yard also makes beams and timbers, posts, corral poles and fence posts, peeled or bark on, milled log home packages, and entry and ranch gates. For timber, it recommends kiln dried or reclaimed old growth material for maximum stability, and it sources material through an extensive network of suppliers. Its projects include some of the largest private and commercial jobs in the Vail and Aspen areas of Colorado, and its fabrication and re-erection methods keep it competitive on even the smallest job. Its management team has over 100 years of experience in the log timber industry, and the company is employee-owned. The company puts its approach this way: "your success is our success." A good fit for a landowner who wants logs or timbers milled and built into a home or other building, or who has an older log home that needs to be brought back to new condition. From topnotch-logworks.com, read 10 October 2026.

Vaughn's Tree Service is a mill in Boulder, Colorado. It appears in the Colorado State Forest Service, Colorado Forest Products Database (lumber, logs, timbers, posts producers). Products: Exterior Buildings, Firewood & Fuelwood, Furniture, Holiday Trees & Transplants, Logs, Posts, Poles & Fencing and Specialty Products. A listing here is not an endorsement.

Vintage Woods Inc. is a wood products business at 210 Airpark Drive in Gypsum, Colorado. It serves Eagle County. Its website describes it as a supplier of finished wood for architects, builders and homeowners, and it says its founders set out to "redefine what’s possible with wood." Its product lines are beams and timbers, siding and decking, and fire-rated cladding and trim. The species it lists include Hemlock, Southern Yellow Pine, Paulownia, Ash decking, and structurally rated type II Douglas fir with Glulams. Some of its beams are beetle-kill wood finished to look like reclaimed barnwood. The business says it sources its wood from responsibly managed forests and uses a heat and steam process for thermally modified boards, with no harmful chemicals. Orders are handled through its Gypsum office, open Monday to Friday, 8 a.m. to 4:30 p.m. The business says it works closely with customers to make sure materials arrive on time and are ready to install. Vintage Woods Inc. suits a landowner who has a building, deck or siding project of their own and wants finished boards or beams, not someone looking to sell standing timber or logs. From vintagewoodsus.com, read 10 October 2026.

VM West LP is a family-owned business founded in Delta, Colorado, and based at 650 N Main Street in Delta. It does vegetation management, forest restoration and private lands stewardship. Its work covers utility corridors, forest management, rangeland management and forest products, which include saw logs and firewood. The crews work from helicopter logging to whole-tree and cut-to-length logging, with self-loaders, mule trains and trailers of different lengths. It works on "steep slopes of up to 65 degrees" with T-Winch equipment. After treatment, it provides a report with before-and-after photos. The smallest job they have done covered 102 acres. That figure comes from the job itself, not from a minimum they set. Their process starts with pre-planning communication with everyone involved. The phone number is (970)852-2520. It suits a landowner with a larger tract in Delta who needs fuels reduction, forest work or line clearing on steep ground, and who wants saw logs or firewood handled as part of the job. From vmwest.com, read 10 October 2026.

West Range Forest Products is a "highly mechanized forest management" and land management company based in Gypsum, Colorado. It has completed more than 150,000 acres of fuels reduction and forest restoration projects on private, state and federal land. The products it makes are logs, wood chips and wood mulch. The work is forest thinning and restoration on wooded ground, with machines doing much of the labor. Landowners who need fuels reduction or forest restoration on their own tract, and who want a company that has worked on private land as well as public, will find it a good fit. It suits the owner of a wooded property that needs that kind of work done.

Wood Butcher Ltd. is a custom portable sawmill and woodworking business in Loveland, Colorado. It is a small operation with a portable bandsaw mill, an Alaskan chainsaw mill, a complete woodshop, a boom truck, a log winch trailer, a dump trailer, a 6x6 UTV and a couple of trucks. The shop makes lumber, beams and timbers, timber frame, log homes and house logs, siding and decking, flooring and paneling, posts, poles and fencing, landscape ties, cabinets, doors and windows, furniture, and firewood. The business works in Larimer County. "There is no job too big or small." Dylan takes questions about the work. Wood Butcher Ltd. suits a Larimer County landowner who wants their own logs milled into boards, beams or timbers, or who wants a finished wood piece made in a small shop.

Dane D Hately is a mill in Lewis, Colorado. It appears in the Utah State University Extension, Utah Sawmills list (Colorado rows). A listing here is not an endorsement.

Doug Jones Sawmill is a mill in Grand Junction, Colorado. It appears in the Utah State University Extension, Utah Sawmills list (Colorado rows). A listing here is not an endorsement.

Montrose Forest Products is a mill in 970-249-0812, Colorado. It appears in the Utah State University Extension, Utah Sawmills list (Colorado rows). A listing here is not an endorsement.

Strong Lumber and Speciality Log Products is a mill in Silt, Colorado. It appears in the Utah State University Extension, Utah Sawmills list (Colorado rows). A listing here is not an endorsement.

Waggoner Timber Service, LLC is a mill in Palisade, Colorado. It appears in the Utah State University Extension, Utah Sawmills list (Colorado rows). A listing here is not an endorsement.

Western Excelsior Corp is a mill in 901 Grand Ave, Colorado. It appears in the Utah State University Extension, Utah Sawmills list (Colorado rows). A listing here is not an endorsement.