Mills

Buda Woodworks designs, fabricates and installs custom architectural millwork, woodwork and casework for commercial and residential projects from premises at 2041 FM2001, Buda, Texas. Its about page says the business was established in 1993 and has grown to become Central Texas' largest source of Architectural Woodwork Institute (AWI) Premium Grade architectural woodwork, working turnkey from design through build to installation. It sells to general contractors, architects, designers and construction teams, and says its work can be seen in buildings and spaces throughout the United States. The service pages cover custom millwork, desks and ornamental fixtures, wall and ceiling paneling, commercial casework, trim and moulding, custom stairs and railings, custom seating, custom fabrics, custom metal fabrication, and stone and solid surface countertops, with materials running to wood, metal, laminate, glass, fabrics, stone and plastics. Listed specialities include blueprint-matched wood veneer paneling, architectural steel including framing structures, reception desks, arches, ellipses, curved walls and columns, bar fronts, tops and railings, cashier stands, and Marlite custom paneling supply in Central Texas. The sectors it names are corporate tenant improvements, office, premium hospitality, luxury residential, medical, education and athletic facilities. Casework is made to Architectural Woodwork Institute standards, the craftsmen and designers are described as AWI-certified, and each project is coordinated by an AWI-tested project manager who acts as the point of contact between the general contractor and the shop; the firm also offers to value engineer projects with architects and designers. Enquiries are handled by a consultation booked through the contact form or by telephone, and the office is open Monday to Friday, 8.00 to 6.00. The site's footer identifies the business as an Arcline Build Group company. As described on budawoodworks.com, read 23 September 2026.

Steely Lumber Co., Inc. is a sawmill in Huntsville, Texas, that produces Southern Yellow Pine lumber. It is an independent, family owned business, and the mill sits at 1405 Southwood Drive. The county it serves is Walker. The mill sells solid sawn pine lumber in 5/4 and 1 inch high grade products, 2 inch dimension products, and 4 inch timber products. It also uses what it cuts. Bark and wood chips feed a pine mulch facility, and the company makes pine biomass pellets. The business says it aims to "utilize every portion of our renewable resource." Its listed species are Southern Yellow Pine, gum, hickory/pecan, and mixed hardwoods, along with hardwood and softwood in general. The company holds Tree Farm certification, American Tree Farm certification, and EN+ certification. Its land holdings sit with Voyager Group, Ltd., which specializes in forest management and land acquisitions. The business describes itself as "Most of all, environmentally-conscious and conservation and restoration focused," and says it works to become one of the most efficient mills in the South. This suits a landowner with pine who wants to deal with a family-owned mill in Huntsville that has its own forest and land arm and a strong focus on conservation, and who would want to ask the mill directly what it buys from neighbors. From steelylumber.com, read 18 October 2026.

Sweeney Lumber's home page opens by saying the firm has been “proudly providing building products and services to North Texas since 1960,” and its About page repeats the date: the company “was founded in 1960 by Hal Hughes and Robert Sweeney, with a commitment to provide quality products and services to the construction industry.” The site is published by the R.E. Sweeney Company at 3700 Noble Avenue in Fort Worth, and every page carries a 2010 copyright line, so some of the wording may be older than current operations. It describes a distribution and manufacturing business rather than a timber-buying one: “Complimented by our other divisions, Resdoor and Sweeney Hardwoods, we provide our customers with a complete line of building products and services including softwood lumber, panel products, prefabricated trusses, doors, mouldings, hardwoods and windows.” The home page lists membership of the Lumbermen's Association of Texas and Louisiana, the National Association of Homebuilders and the Structural Building Components Association; it names no third-party certification or grading scheme. The contact page gives a toll-free line, a local number, a metro number and a fax, offers a downloadable credit application for “those who qualify,” and invites buyers to tick interests including lumber, engineered wood, plywood, OSB, trusses, and siding and trim. Nothing on the pages read addresses buying standing timber, any minimum tract size, staff or forester credentials, or how a job is quoted. As described on sweeneylumber.com, read 23 September 2026.

Tanner Services, LLC is an oilfield services contractor whose work spans construction, timber, solids control, poly pipe and pit lining, production and maintenance, and hydro excavation, summarized on its site as "Providing Construction Services to the Oil & Gas Industry." The company says it and its management team have been providing general oilfield construction services to the Gulf Coast for over 40 years on the home page, while the about page and site footer state over 35 years. Its corporate office is at 302 Unatex Road, Eunice, LA, and it lists locations in Eunice and Schriever, Louisiana and Kountze, Dayton, El Campo and Midland, Texas. On the timber side, the company states that "In order to ensure quality mat construction, Tanner Services owns and operates its own in-house lumber mills and mat building facilities," processing lumber for board roads, pipeline skids and crane mats; it presents board roads and mats as "an efficient and environmentally friendly solution to unfavorable terrain by creating temporary yet solid platforms and roads for both work and transportation," and calls itself "your safest path through troublesome weather and terrain." Listed timber products and services are 2-ply and 3-ply laminated mats, board road lumber, dragline mats, crane mats, pipeline skids, hardwood chips, full support to all Tanner Services locations, special orders and delivery. Safety is presented as a priority, with job safety analysis, weekly and monthly safety meetings including top management participation, and in-house safety directors described as knowledgeable in OSHA training and experienced in the medical field; training guidelines listed include confined space entry, cranes, DOT HM-126F hazmat, fall protection, first aid/CPR, lockout/tagout, process safety management, respiratory protection and rigging/material handling. As described on tannerservices.net, read 23 September 2026.

This listing is for a Georgia-Pacific operation in Diboll, Texas, but the only pages that answered for it were the company's national corporate site. Those pages describe Georgia-Pacific as a Koch, Inc. company founded in 1927 in Augusta, Georgia, as Georgia Hardwood Lumber Company, and say it now has more than 150 locations worldwide, locations in nearly 30 states, over 30,000 direct employees and $2.7 billion in direct wages and benefits. The company says it makes consumer tissue, towel and tableware products under names such as Quilted Northern, Brawny and Dixie, supplies dispensers and hygiene products to businesses, produces pulp and corrugated boxes, operates one of the largest recycling businesses, and sells building materials through large do-it-yourself retailers. Its history page lists mill investments and acquisitions across many states, including Texas references to a gypsum wallboard plant, a Nolan County gypsum facility and the Pineland lumber complex. The corporate pages read for this listing do not name the Diboll operation, do not say what it takes in, and do not state its founding, services or certifications, so nothing here should be read as this facility's own account of itself. As described on gp.com, read 23 September 2026.

The crawled pages are Georgia-Pacific's company-wide corporate website rather than a page for the Pineland, Texas sawmill, so what they carry is a description of the parent company. Georgia-Pacific says it was "Founded in Augusta, Georgia, as Georgia Hardwood Lumber Company, a hardwood lumber wholesaler" in 1927, when it "Operated five sawmills in the South," and that it has "more than 150 Georgia-Pacific locations around the world," "30K+" employees and "locations in nearly 30 states," with "$15B" "Invested into GP operations since 2014" and "$2.7B" in direct wages and benefits. It is "a Koch, Inc. company," acquired by Koch in 2005 "to become a privately held, wholly owned subsidiary." Its product lines are grouped on the site as Building Products, Cellulose, Consumer Products, GP PRO, Packaging, Pine Solutions and Recycling, and it says its building materials are sold "at large do-it-yourself warehouse retailers" while household brands include Quilted Northern, Brawny and Dixie. On stewardship it states that it works to "maximize recycling, reduce energy use and set the standard in sustainable forestry." The site's history page records lumber investments including a "$100 million lumber production facility in Talladega, Alabama" and a "1 billionth boardfoot" milestone in Albany, Georgia, and past recognitions such as the "Sustainable Forestry Initiative President's Award" in 2009 and OSHA Star Level in 1992. Texas is named three times: in the state list of US locations, for a "$325 million gypsum wallboard facility in Texas" in 2023 and a Nolan County gypsum plant in 2020, and, for Pineland specifically, a single 2021 timeline entry stating that "Georgia-Pacific modernized Pineland, Texas, lumber complex, making it the largest sawmill in the South." No further detail on the Pineland operation, its products, contacts or timber buying appears on the crawled pages. As described on gp.com, read 23 September 2026.

Texarome, at 1585 East Ranch Road 337 in Leakey, Texas, distills and refines pure and natural essential oils, with Texas cedarwood oil at the center of its business. The company says it was "founded in 1982 by Gueric and Victor Boucard in an effort to carry on the family tradition of Essential Oil distillation that goes back to the 40's," and that it has since grown into "a multinational organization with key internal partnerships and production units that includes six separate distillation facilities, as well as three rectification units, and four major products," drawing on three generations of expertise and proprietary distillation technology. Texas cedarwood oil is called its flagship product, made from raw material sourced within 60 to 100 miles of the Texas facility, of which it says it processes "over 50 tons per day" before rectifying and packaging for shipment worldwide. It also produces Virginiana cedarwood oil, working with loggers and ranchers to use byproducts of the logging industry that "would often been thrown away or burned," with that material delivered from over 200 miles away; amyris oil distilled at its facility in the Baharuco Forest region of the Dominican Republic from dead, dry amyris wood gathered by farmers and collectors, then shipped to Texas for processing and quality control; and Haitian vetiver oil, tied to Victor Boucard Sr.'s pioneering of vetiver plantations in Haiti in the 1940s with partner Louis Dejois. The company states it is "the only Texas distillery with the refining facilities to redistill and blend Cedarwood oils and other essential oils according to the customer's exact specifications," and that its quality control laboratory uses a gas chromatographic apparatus to guarantee consistent composition. Listed services also include consulting, toll distillation and plant design and construction. As described on texarome.com, read 23 September 2026.

Textruss, Inc. manufactures and supplies wood roof and floor trusses from 12201 Dorsett Road in Austin, designing and making truss systems for residential and commercial clients in the Austin area and selling primarily in Central Texas. Its own account of the work ranges from the simplest designs through multifamily projects and high-end residential design to large commercial structures. The history page dates the business to 15 October 1970, when W.C. “Bill” Snow cleared one and three-quarters acres of brushy land near Austin and located the slab for the first building, with Jimmy Youngquist and Roscoe C. Morris as co-founders; the company was incorporated in 1971, Youngquist sold his stock in 1978, and a complete reorganisation followed on 16 July 1982 when Morris sold his. A further change of ownership in January 2000 brought in Ben Doyle as president and general manager, Allen Kalina as secretary and treasurer, Marvin Hale as vice-president and sales manager and Chuck Prasek as vice-president over the office and design. The site now covers nearly eight acres, with a two-storey office building of about 3,000 square feet, two manufacturing facilities totalling 30,000 square feet and lumber sheds, and the company reports fifty employees, many with fifteen to thirty years' service. It began with roof trusses and now produces floor trusses as well, uses southern pine exclusively, and runs its own fleet of four trucks for delivery, saying a Textruss man goes out immediately if problems arise on a builder's site. Memberships listed are the Austin Builders Association, the Austin Chamber of Commerce, the United States Chamber of Commerce, the BBB, TMAT, TCABA and TMTA. The pages carry a 2014 copyright notice, so the figures may be some years old. As described on textruss.com, read 23 September 2026.

Townley Lumber Co. describes itself as a family pallet manufacturer in Henderson, Texas, “Family Owned & Operated since 1943,” built “on strong values, dedication to family, hard work and integrity.” The about page places the operation “in the heart of East Texas’ timberland” and says the yard runs “two high volume sawmills and our three Viking Automatic Nailing Machines, onsite mold treatment facility, and heat treatment facility,” with Baker, Brewer and McDonough processing equipment and a year-round raw material inventory of “over 1,800 truckloads of pine and hardwood logs.” It states that “our workforce of 140+ employees proudly adheres to Texas OSHCON Voluntary Industrial Safety Compliance guidelines as we produce 15 truckloads of pine and hardwood pallets every day.” The services page sets out custom pine and hardwood pallets built to specification with computer-aided design, paint selection, chamfered deck boards, clipped corners and banding; clean, bark-free paper-grade wood chips; bulk saw dust for particleboard, mulch, litter and fuel; an in-house logistics company with its own tractor trailers, flat beds and dry vans; and a heat treatment facility built into the ground so pallets can be submerged in solution, after which they are dipped for mold prevention and, the site says, made “ready for exporting overseas.” On terms, it offers “guaranteed six-month pricing packages” with 30-day written notice before any increase, “1-percent 10-day early pay discounts or Net 30,” and emergency warehousing of pallet inventories. Some text is plainly dated, referring to a new mill “to be completed in the summer of 2020” and to “78 years” in business. The pages name no export or third-party certification, no product grading standard, and no minimum order size; quotes are handled by phone or a request form. As described on townleylumber.com, read 23 September 2026.

Unique Wood Products Inc. is a wood milling and supply business at 9915 Tanner Road in Houston, Texas. It has been providing building materials and serving remodelers since 1988. The work is turning wood into finished products: custom milling, stair treads, wood countertops, solid hardwood flooring, decking and mouldings. The species it names are red oak, white oak, poplar, primed pine and birch grade plywood, along with ipe and garapa for decking and millwork. The county it names is Harris, with a base in Houston and service to the surrounding areas. There is a North Houston custom millwork shop on Tanner Road and a South Houston flooring showroom on Easthaven Boulevard. The Tanner Road shop is open Monday to Friday, 7:30am to 4:30pm, and Saturday, 8:00am to 12:00pm. The business says it caters to construction firms and real estate work. Its own words describe the aim as "value-added millwork products and services," and one of its services is "Custom make your own molding or stair tread to your design." It suits a landowner who wants wood turned into finished millwork, flooring, stair parts or countertops to a specific design. From uniquewoodproducts.com, read 18 October 2026.

The Grandview entry is a Texas plant of a national corporation, and the site reached, ufpi.com, is the corporate site: the pages read describe the parent company as a whole and say nothing at all about the Grandview operation. The company states it was “founded in 1955 as Universal Forest Products” — the name this listing still carries — and that it “started by supplying lumber to a single market: factory built housing.” It now trades as UFP Industries on NASDAQ under the ticker UFPI, and its home page reports “196 Locations Worldwide,” “14,000+ Employees & Growing” and “$6.3 Billion Net Sales 2025,” with a head office at 2801 East Beltline NE, Grand Rapids, Michigan. Four operating segments — “Retail Solutions, Packaging, Construction and International” — are described as businesses that “manufacture and sell a wide variety of value-added products used in residential and commercial construction, outdoor living, packaging and other industrial applications worldwide.” The About page says the firm “began as a lumber company” and is today “a family of businesses that combines innovation, logistics, design, engineering, and value-added solutions to solve complex challenges.” The history page records that the company went public “issuing 5.7 million shares at $7 each” and that it “celebrates 70 years in business” in 2025. None of this is specific to Grandview. The corporate pages give no address, phone number, product list or capability for the Texas plant, and nothing on them addresses buying standing timber, a minimum tract size, or how work is quoted. As described on ufpi.com, read 23 September 2026.

Vital Earth Resources, Inc. is a company in Gladewater, Texas, with its headquarters at 706 Broadway Ave. It was founded in 1983 by the Hammer family and has operated since then. Its main work is in soils, fertilizers and biostimulants. It makes compost-based soils for growers and landscape contractors, along with bagged soils and mulch. For wood, the business is listed for biomass, wood pellet or landscape organic facility work, and for mulch. The species it names are southern yellow pine, mixed hardwood, hardwood and softwood. It also lists milling. The county it serves is Gregg. It suits a Gregg County landowner whose wood is headed to a biomass, pellet or mulch outlet, rather than one who wants a logging crew or a full timber sale handled from start to finish. From vitalearth.com, read 18 October 2026.

Wampler Manufacturing, LTD provides custom saw milling services in Central Texas and specialises in Eastern Red Cedar lumber. Its product line, as listed on the site, covers beams, cedar flooring, cedar panelling, mantels, moulding and trim, peeled posts, cedar posts, cedar rounds and first cuts, and the site carries a client project gallery alongside pages for the business and its products. The yard is at 1416 Hwy 95N, Bastrop, Texas, and opening hours are given as Monday to Friday, 8am to 5pm, with a note that the business is closed on 24 and 25 December and open from 27 to 31 December. Orders are placed by telephone: the contact page asks customers to call to place an order, on 512-321-2916, which is the number held for this listing. The three customer comments reproduced on the home page are Google reviews, and they refer to buying cedar products for projects, to finding cedar remnants for small items such as bird houses, and to prices and staff. The site gives no founding year, no employee count, no certifications and no statement of the species bought in or the volume milled. The business is styled Wampler Manufacturing, LTD on its own pages, while this listing carries the name Wampler Manufacturing Company. As described on wamplermfg.com, read 23 September 2026.

Ward Timber, LTD. states that it was "Founded in 1978" and is "a 2nd generation, family-owned, timber company based in the heart of Northeast Texas," calling itself "A Leader in the Timber Industry for over 40 Years" and a buyer of "Timber and Timberland." The company says it "offers a broad range of forestry services to its clients throughout the four states region of Texas, Arkansas, Oklahoma & Louisiana" and "is also proud to offer an extensive wholesale sales inventory of specialty hardwoods and lumber" through WTC Lumber. Its main office is at 1101 US 59 (P.O. Box 360 for mail), Linden, Texas 75563, phone 903-756-7700, fax 903-756-8313; WTC Lumber is at 5090 Dick Price Rd., Fort Worth, Texas 76140, phone 817-371-5760. The site also lists a Mill section. Ward Timber says it has "a combined total of more than 300 years of forestry experience" and "a well-earned reputation for providing the most experienced, professional forestry and wildlife management services in the Four States region," with forestry services focused on "timber procurement and forest management as well as a broad range of other land management activities and objectives ensuring landowner goals are met"; a "free, personal consultation" with one of its foresters is offered. The founding partners are given as Bill Ward, a Bachelor of Science in Forestry graduate of Louisiana Tech University, and John Jones, a forestry graduate of the University of Missouri and former Nekoosa procurement officer; together they "have grown Ward Timber into a multi-faceted company that today employs over 200 employees and contractors." Head forester Mark Wilson (39+ years' experience, BS Forestry, Mississippi State University) is named as a member and former board member of the Texas Forestry Association and holds a Pro Logger Certification, as do foresters Thomas Parnell (34+ years) and Larry Butler (38+ years, Arkansas Pro-Logger Certification). As described on wardtimber.com, read 23 September 2026.

Novus Wood Group, LP is a wood debris business in Houston, Texas. It grinds clean woody debris into mulch and WoodFuel products. If you have cleared land or storm-damaged trees, it also handles that debris through contract grinding for commercial and municipal customers, land clearing debris management, and storm debris management. It serves Harris County from its Houston plant at 5900 Haynesworth and a second site in Dickinson, with League City also named. Its own pages say it has kept millions of yards of material out of landfill over the past 25 years. Both locations are "TCEQ approved site for clean woody debris recycling," and its collection and transport trucks run on clean-burning natural gas. It also collects and hauls large loads of clean woody debris and sawdust. The costs a landowner should know are the $20.00 minimum charge and a $45 splitting charge for each tree trunk or stump over 24 inches in diameter. Trunks or stumps over 6 feet long are not accepted, and treated wood, painted wood, concrete and soil are on the unacceptable list. This suits a landowner who has cleared brush or trees and needs the debris ground up or hauled away, not a buyer for the wood. From novuswoodgroup.com, read 18 October 2026.

Gary Weeks and Company, at 112 West Spoke Hill in Wimberley, Texas, describes itself in its own headline as "An American Company of Artisans" and states its work simply: "We design and build furniture to the highest standards of craftsmanship, ergonomics, beauty, and longevity. We ship worldwide." The signature piece is the Weeks Rocker, sold under a plain promise that the chair "is guaranteed comfortable for you, or you may return it for a full refund. We'll pay the shipping both ways." Alongside the rockers, in cherry, walnut, maple, mesquite and porch versions, the company builds dining chairs it calls "strong, light, graceful, and comfortable," dining tables in "fine solid wood," barstools, footstools, side tables and custom desks, tables and cabinets, with customizing options including engraving, bronze plaques, inlay and carving, and published guidance on oil-finish and varnish repair. It sells direct rather than through dealers: "People find us in their web search for a rocking chair of distinction. They order. We deliver," and it says it has shipped "directly to people in every state and to Europe, Australia, Asia, Africa, and South America." Asked how a small custom shop earns that trust, the site answers with "the depth and detail of this website. NO COOKIES. NO POPUPS. NO ADS," its delivery and satisfaction guarantees, "our long and steady history," and "the words of more than 1500 patrons," counting 1,600 or more reviews and comments. The history page is written by Gary Weeks in the first person: in 1987 he and Leslie converted an implement shed on the old Latchford ranch into a wood shop, jacking up a falling roof and running wire and dust-collection pipe; by 1990 he had built a set of dining chairs and swore he'd never build another, then returned to chair design, built a fitting booth and invited "dozens of people to sit and suggest adjustments" before drawing the rocker. "Pecan being the state tree, and our market Texas, we started out making only pecan rockers." Their son Austin later joined the business. On material, the company says it is "imperative, and moral, to manage forests so that wood may be harvested in perpetuity," buys Forest Stewardship Council certified cherry, maple and mahogany where available (Collinswood for cherry and maple, sapele from FSC forests in the Ivory Coast, walnut from Irion Lumber uncertified), and a reprinted 2006 Northwest Certified Forestry profile calls Gary Weeks an "FSC certified furniture maker." The showroom is open by appointment, Monday through Saturday. As described on garyweeks.com, read 23 September 2026.

Wooden Pallets, LTD describes itself as "a specialty pallet and skid manufacturer serving the Gulf Coast of Texas and Louisiana," operating from Silsbee, Texas under the banner "Quality, Sustainability and Innovation - Reshaping the Pallet Industry." Its own account of its growth is specific: the company "began operations in 1983 with 15 people in a 14,000 square foot building," and today has 180 employees and more than 80,000 square feet of manufacturing floor space, complemented by "an adjacent 15 acre concrete pad that stores more than 600 truckloads of lumber and 100 truckloads of completed pallets year round." On capacity, the site says the plant "boasts infrastructure that includes six saw lines, eight automated and manual nail lines, producing over 15,000 pallets daily," and that the company "has traditionally processed an impressive 65,000,000 board feet of lumber and more than 3,000,000 pallets annually," delivered with "a modern fleet of 11 trucks and trailers, ensuring our clients always receive their pallet orders promptly." The products and services page leans on experience and design work: "With more than 30 years of experience in designing and building pallets and skids, our team of experts provide clients with solutions in packaging re-design to minimize costs without sacrificing quality." Three product themes are set out - Premium Pallets & Skids "intricately designed for superior quality and durability, with optimized loading features that enhance safety and efficiency"; a Pallet Designed System called "an intensive and comprehensive process that involves crafting pallets, adhering to precise dimensions, utilizing robust materials, and design principles"; and High Quality Material "selected for their exceptional strength and durability." Safety is presented as a formal program: "an all-encompassing safety protocol," including "regular external audits and internal safety evaluations" plus "compulsory weekly meetings focused on safety procedures and quality assurance." The company frames its promise around dependability - "We strive to earn our client's trust by consistently supplying high quality pallets and skids. Prompt and dependable customer service, and quality assurance contribute to the value our clients have come to expect" - and publishes customer testimonials from Inteplast Corporation, a supplier relationship it says has run 30 years, and from Louisiana Pigment Co., L.P., describing 15 years of pallets "always constructed to our specs and delivered on time." Navigation also lists Engineering & Design and Capacity sections, and the site invites visitors to request a quote by phone or form. As described on woodenpalletsltd.com, read 23 September 2026.

Fred Collin's Workshop is a wood shop in Bandera, Texas, in Bandera County. It makes custom furniture and fixtures, and it runs an on-site sawmill. Visits are by appointment only, so call ahead before you come out. The sawmill takes logs you bring in. Its stated capacity is 42 inches wide by 16 feet long. The species it handles include cypress, juniper (cedar), walnut, mesquite and cherry, along with other local woods. It does not mill oak or imported exotics. The shop also sells raw slabs of native Hill Country wood for dining tables, mantels and similar pieces. The slabs are "responsibly harvested from surrounding areas," and many come from trees on the banks of the Medina River that were knocked down in floods, going back as far as 1978. Finished work includes mantels, bar tops, kitchen islands, beds, desks, tables and benches. You can visit to design a piece with them or choose from what is in the showroom. It suits a landowner who has their own logs to mill, or who wants furniture made from local native wood, and who is happy to book a visit first. From banderaworkshop.com, read 18 October 2026.

Arrington Lumber & Pallet Co. presents itself as an integrated pallet maker working from its own timber through to its own trucks. The home page states that “we mill our own lumber, build our own pallets, and deliver on our own trucks — out of Jacksonville, Texas, since 1963,” and adds “not a middleman in sight.” It gives the company’s history in its own words: “In 1963, E.C. Arrington started with a rented building, one helper, and one truckload of pallets a week,” with his son Eddie joining in 1972 and his grandson Kyle running the business today — “three generations, one standard.” The counters on the page claim four sawmills operated, more than 100 pallet sizes built, four states served and 60-plus years in business, and the process section adds “four sawmills, six nailing machines” and an owned delivery fleet, saying the operation was built “to own every step.” On products, the site says “over 100 sizes. Stringer or block. KD or green pine. Standard spec or fully custom,” and offers to “engineer it to carry what you need it to carry.” Customers are described as being across Texas, Louisiana, Oklahoma and Arkansas. The contact page gives a Jacksonville mailing address at PO Box 1900 and the telephone number (903) 586-4070, which matches the number on file, and promises that “someone who works here will answer.” The pages read give no certifications, no published prices, no minimum order and no mention of the crossties recorded for this mill in the state directory. As described on arringtonlumber.com, read 23 September 2026.

Southern Forest Products is a sawmill in Newton, Texas, at 181 County Road 2012. It was founded in 1974 and works only with southern yellow pine. The mill makes lumber, decking and specialty timbers in a wide range of sizes and lengths, and sells them all over the country. Its trade is selling finished wood to buyers, not buying standing timber from landowners. Its lumber is graded under the Southern Pine Inspection Bureau system. At the planer mill, four trained graders check each piece for knots, checks and splits, then grade it for strength and appearance. The mill calls itself a "ONE STOP SHOP" for decking and timbers. It suits a builder or buyer who wants graded southern yellow pine lumber, decking or timbers, rather than a landowner looking to sell a stand of trees. From sfptexas.com, read 18 October 2026.

The site reached for this listing is lpcorp.com, the corporate site of Louisiana-Pacific Corporation, which brands itself LP Building Solutions; the pages read describe the company as a whole and carry very little about the Jasper plant itself. The home page says LP has “over 50 years of proven experience” and that “our integrated system of building materials helps you simplify your process, cut down on inefficiencies and future-proof your home.” The solutions menu covers siding and trim, sheathing and subflooring — including OSB sheathing, over-sized OSB, radiant barrier sheathing and fire-rated OSB sheathing — premium subflooring, and shed products. The company overview page says “LP has several locations across North and South America,” with headquarters in Nashville, Tennessee. Two items touch the Texas location. The locations page lists “Jasper, Texas” among LP’s OSB manufacturing locations, alongside Carthage, Texas and mills in Alabama, North Carolina, Québec, British Columbia, Chile and Brazil, which is consistent with the oriented strand board recorded as this listing’s product. And the news feed on the About LP page carries an item dated September 1, 2026 headlined “LP to Curtail OSB Production at Jasper, Texas Facility.” The crawl captured only that headline and not the release behind it, so the scope and duration of the curtailment are not established by the pages read; anyone relying on this record should confirm the mill’s current operating status directly. Beyond those two lines, the pages give no capacity, workforce, contact details, log or fiber purchasing terms, delivery requirements, minimum tract size or certifications for the Jasper mill. As described on lpcorp.com, read 23 September 2026.

The website recorded for this Carthage listing in Panola County, Texas is the corporate site of Louisiana-Pacific Corporation, trading as LP Building Solutions, and only corporate pages came back when it was read. Those pages describe a company with what it calls over 50 years of proven experience, headquartered in Nashville, Tennessee, with administrative offices in the United States and South America and manufacturing plants across North and South America, making siding and trim, sheathing and subflooring, and shed panel products, including oriented strand board. Its locations page lists Carthage, Texas as one of its oriented strand board manufacturing locations, which is the only reference to this site anywhere in the pages read; beyond that entry in a list, the corporate pages say nothing about the Carthage plant itself, neither what it takes in, when it opened and how large it is, nor its hours, contacts or how it quotes, so nothing here should be read as this mill's own account of itself, and the company history and product claims above belong to the parent rather than to the Carthage operation. A company news item dated 1 September 2026 concerns curtailed oriented strand board production at the separate Jasper, Texas facility, not Carthage. As described on lpcorp.com, read 23 September 2026.

M & H Crates, Inc. describes itself on its home page as a “pallet manufacturer and supplier, building to spec per customer design.” The ‘Who We Are’ page carries the company’s own account of its history and ownership: “Established in 1968, M&H Crates is now under the 3rd generation of leadership with strong ties to Texas A&M University,” followed by the statement that “M&H Crates is an employee owned company.” On what it makes, the same page says the company “can manufacture new pallets to any customer specification using the Pallet Design System” and that it offers “from standard sizes to custom designs,” adding heat treatment and delivery services “to make the process as easy as possible.” Its stated mission is “to provide our customers with the highest quality pallets at competitive prices,” and the home page sets out three selling points — quality products, custom solutions and exceptional service — in general terms rather than with specifics. The contact page gives the address as 4022 FM 347 North, Jacksonville, Texas 75766, which differs from the 402 FM 347 N on file, and the telephone number 903-683-5351, which matches. Business hours are Monday to Friday 07:00 to 16:00, closed 11:00 to 12:00 for lunch, with weekends closed, and visitors are invited to call in person during those hours. The pages read name no certification — heat treatment is offered but no ISPM-15 or other mark is claimed — and give no sawmill or plywood detail, no staff names, no capacity figures, no lead times and no prices. As described on mhcrates.com, read 23 September 2026.

westrock.com now redirects to smurfitwestrock.com, and the pages read are the global corporate site of Smurfit Westrock rather than anything about the Evadale mill. That site presents the company as a sustainable packaging manufacturer: it states that “in 2025, we manufactured 220 billion square feet of corrugated packaging and hold strong supply positions in the solid board, folding carton, and Bag-in-Box markets,” and that “we manufacture a wide range of renewable, recyclable and recycled paper and board, with a capacity of approximately 23 million tons per annum.” Its recycling page says that “with 63 recycling plants worldwide, we process approximately 14 million tons of recovered fiber annually across our 62 paper mills,” and describes closed-loop collection of used paper and cardboard from commercial customers, bought “at competitive rates.” On fibre supply it states: “We source fiber from small, private landowners as well as our own forests which are FSC and/or PEFC certified. All forests from which we source fiber are chain-of-custody certified,” and elsewhere that the “paper mill system is 100% CoC Certified.” Product pages cover corrugated, e-commerce, food-contact, foodservice, paperboard, protective packaging, bags and sacks, and display design. Careers material refers to “more than 500 locations worldwide,” and would-be suppliers are asked to complete a form on the Supplier Resources page, which is the only route the site offers a vendor or landowner. Nothing read names Evadale or the FM 105 mill, says what it produces or buys, or gives a local contact; the certification statements quoted above are made for the company’s system as a whole and not for this Texas location. As described on smurfitwestrock.com, read 23 September 2026.

The address on file for this Somerville, Texas site leads to koppers.com, the worldwide corporate site of Koppers Inc. rather than a page for the Somerville operation. The pages read carry no mention of Somerville, of Texas, or of any local phone or street address - the only contact given is the Pittsburgh head office at 436 Seventh Avenue - so nothing here describes what the Texas plant does, and readers should treat the material below as the parent company's account of itself. Koppers describes itself as "a leading provider of wood- and carbon-based technologies, products, chemicals, and services that strengthen our global infrastructure," working to "build, maintain, and improve our global infrastructure through environmentally responsible solutions." Its stated purpose is "Protecting What Matters and Preserving The Future," and its safety commitment is branded Zero Harm. The company's origin story is that it "dates back to the early 1900s, when German engineer, Heinrich Koppers, put himself at the forefront of sustainability by creating a new kind of coke-oven furnace that recovered byproducts for other uses rather than releasing them into the atmosphere." "What started as a Pittsburgh-based company more than 100 years ago has since grown to span several continents," with locations in North America, South America, Australia, New Zealand and Europe. Products are grouped as Wood Enhancement Technologies, Railroad, Utility & Industrial, Carbon & Coating Solutions and CPRO for advanced battery anode materials. The Railroad business makes "treated wood products [that] help build and preserve critical railroad infrastructure," including crossties; the Utility business covers "quality wood poles, cross arms, piling, and more," and the site claims Koppers is "the largest utility pole manufacturer in the U.S.," serving investor-owned groups, cooperatives and municipal utilities. The Performance Chemicals team "develops innovative wood-preservative and fire-retardant chemicals and technologies for decking, fencing, utility poles, and pressure-treated commercial construction lumber" and supports customers "in more than 70 countries." Carbon products listed are carbon pitch, creosote and naphthalene. Services are Recovery & Reuse - "servicing the full life cycle of your railroad crossties and utility poles... turnkey solutions for all forms of wood waste recovery, disposal, and recycling" - plus Research & Innovation and Carbon Material Testing through the Koppers Global Technology Center. The company describes a vertically integrated model "united by wood preservation technologies across diverse markets," and points to its 2025 Sustainability Report, a refreshed 2030 strategy and a 20th anniversary on the NYSE. As described on koppers.com, read 23 September 2026.

Acacia Hardwoods is a wood products retailer at 4614 130th St. (FM 1585) in Lubbock, Texas, with store hours of 8:00 to 5:00 Monday through Friday and 8:00 to 12:00 Saturday. Its catalog is organised into domestic hardwoods including alder, ash, basswood, birch, aromatic cedar, cherry, African and genuine Honduran mahogany, hard and soft maple, red and white oak, pecan/hickory, sugar pine, poplar and walnut; specialty hardwoods such as birds eye maple, cedar mantles, mesquite, myrtle, osage orange, quilted maple, soft curley maple and Spanish cedar; and a long list of exotic woods including bocote, bubinga, cocobolo, ebony, jatoba (Brazilian cherry), kingwood, koa, lacewood, padouk, pink ivory, purple heart, Honduras rosewood, teak, wenge, yellowheart, zebrawood and ziricote. The company also stocks plywood in species such as Baltic birch, knotty pine, meranti (lauan), okoume and radiata pine, sheet goods, sheet veneer including burl and quarter sawn options and special order veneers, hardwood dowels, biscuits, iron-on edge banding, plugs and buttons, sandpaper and sanding accessories, cabinet hardware such as hinges and ball bearing drawer guides, bulk screws, finishes including lacquer, polyurethane, Minwax stain and Danish oil, Titebond and polyurethane glues and wood fillers, and pen kits with pen blanks. The site offers a downloadable PDF catalog with prices, a product request form, and states "We Deliver!" On its About page the company says the late Ray J. Diekemper, Jr., an independent crude oil producer and head of RJD Management Co., Inc., purchased the company in 1996 and that after his death in late 1999 Mrs. Lou Diekemper took over operations and became President, aiming "to offer quality wood products at a reasonable price" and to keep alive his "passion of wood and conducting honest business practices." As described on acaciahardwoods.net, read 23 September 2026.

Turner Woodworks Inc. is a woodworking shop in Groveton, Texas, at 1996 FM 3154. Keith and Kathie Turner own it. It has been in business since 1979, and their two daughters and a son-in-law also work there. Keith has always loved working with wood, and the business grew out of that. The shop builds steps, decks, and setup materials for mobile home dealers and setup crews, and it supplies them across Texas. It also builds custom cabinetry for homes and commercial sites. The work uses southern yellow pine and mixed hardwood, and the county listed for it is Trinity. This is a product shop, not a timber buyer or logging outfit. Its work is building finished pieces, not buying standing trees or cutting them on your land. Its own line puts it plainly: "If you can dream it, we can build it." The shop can be reached at (936) 642-2539. This business suits a landowner who already has a deck, steps, or cabinet job in mind and wants a shop to build it, rather than one to buy the timber. From turnerwoodworksinc.com, read 18 October 2026.

Fort Worth Lumber Company presents itself as a wholesale building-supply house with a mill and a truss plant on site, under the line “Your hometown source for all your lumber needs.” The home page states: “We offer a Full Mill On-Site, Custom Roof and Floor Trusses. We offer a A Full Line of Nationally Known Building Products.” Of the mill it says, “We can manufacture any and all types of wood siding patterns, tongue and groove flooring, beaded ceiling patterns, and some moldings with our eight inch molder in our mill.” Of trusses: “We use Computer Aided-Design software from ALPINE Engineering to design and build custom trusses in our truss plant. Utilizing ALPINE fasteners we can manufacture trusses which are optimized for your specific needs.” It carries products from Georgia Pacific, Weyerhaeuser, Tamko, Simpson Strong-Tie and Louisiana-Pacific, is “now a Trex stocking dealer,” and points to a sister company, Fort Worth Sash and Door. The about page gives the history: “Fort Worth Lumber Company began in 1893 as H.H. Hardin Lumber Company on East Terrell Street in Fort Worth, Texas,” was renamed Fort Worth Sash and Door in 1946, took its present name in 1963 and moved to South Freeway in 1970. It is “both a family owned and operated business”; Robert Fiesler took over in 1955 and his daughter Emily continues it, and staff are named down to yard supervisor, truss manager and mill manager. The yard is at 9101 S. Freeway, open Monday to Friday 7:00am-5:00pm, and enquiries go to (817) 293-5211. The site says nothing about buying standing timber or logs, holds no certification out, and publishes no prices; a credit application is offered and quoting appears to be by phone. As described on fortworthlumber.com, read 23 September 2026.

The website on file for this listing is the corporate site of Idaho Timber Company, and the pages reached describe the national company rather than the Fort Worth plant. The home page bills it as a “National Timber Company” offering “exceptional manufacturing, mill-direct just-in-time delivery and prompt, professional service,” and states: “We’ve positioned our production sites strategically across the United States to serve you best. Our plants are capable of shipping 65 million board feet of lumber products each month!” A locations menu lists Idaho, Florida, New Mexico, North Carolina and Texas, and the senior team list includes a “GM of Texas Facility” — the only reference to this state on the pages read. The contact page gives a main office at “3540 E. Longwing Ln, Suite 270” in “Meridian, Idaho 83646” with an Idaho phone number and a toll-free line; the Fort Worth address and number in this listing appear nowhere on it. The team page sets out management history, saying its president and chief executive “joined Idaho Timber in 1990 as the General Manager for the Home Center Division,” was promoted to president and chief operating officer in April 2000 and named chief executive in 2005, and it also names a vice president and chief financial officer and a vice president of human resources and general counsel. What the pages do not carry is anything local: no founding date for the company, no certifications, no account of what the Fort Worth operation produces, the species it runs, its capacity, or any minimum order or tract size. Those would have to come from the company directly. As described on idahotimber.com, read 23 September 2026.

The directory record for this Saginaw, Texas location points to the company-wide corporate website of UFP Industries, the parent business formerly named Universal Forest Products; the pages are corporate in scope and say nothing specific about the Saginaw operation or any Texas address. Company-wide, the site describes a manufacturer that “began as a lumber company” and was “Founded in 1955 as Universal Forest Products,” supplying lumber to a single market, factory built housing, before broadening. It now states it “supplies thousands of products that support the world’s physical infrastructure,” organised into four operating segments — Retail Solutions, Packaging, Construction and International — which it says “manufacture and sell a wide variety of value-added products used in residential and commercial construction, outdoor living, packaging and other industrial applications worldwide.” Headline figures given are 196 locations worldwide, “14,000+ Employees & Growing,” more than 15,000 people and hundreds of affiliates, “71 Years of Service,” 33 years as a publicly traded company and “$6.3 Billion Net Sales 2025”; the company trades as NASDAQ: UFPI and lists a corporate address in Grand Rapids, Michigan. The history page records that its Auburndale, Florida plant produced the first charge of treated lumber in 1978 and that UFP is “one of the world’s largest lumber pressure-treaters,” and that in 1997 Universal entered the site-built construction market “with acquisitions in Pennsylvania, Texas and Colorado.” The company name changed to UFP Industries in 2020. As described on ufpi.com, read 23 September 2026.

El Paso Truss, Inc. presents itself on its own site as a truss manufacturer working from 9931 Railroad Drive in El Paso. The home page carries the line “Manufacturing Trusses Since 1976” and describes the firm as “a leading truss manufacturer in the southwest,” providing “high-quality trusses for a diverse range of projects, including commercial, residential, and custom builds,” with “nearly five decades of experience.” The about page states that “Since 1976, El Paso Truss has established a strong reputation for outstanding customer service and unwavering dedication to our clients,” and says it is “more than just a truss supplier” but “a trusted partner to contractors across El Paso, Southern New Mexico, and West Texas.” Its mission statement speaks of combining “technical expertise with a customer-centric approach to delivering superior truss solutions at competitive rates.” Work is quoted through a “Get A Quote” form or by phone at 915-751-0025; business hours are given as Monday to Friday, 7:00 AM to 4:00 PM, with Saturday and Sunday closed. The three pages read — home, about and contact — are short and promotional. They say nothing about plant capacity, the species or grades of lumber used, design software or engineering review, the credentials of staff, any certification or trade-association membership, or how trusses are priced and delivered. A reader looking for those details would have to ask. As described on elpasotruss.com, read 23 September 2026.

Vintage Woodworks is a direct-to-customer supplier of decorative architectural millwork, heading its pages "Architectural Details Direct." The site says the company was "Founded in 1978" and has "become the largest business of our kind," serving "Hundreds of thousands of wonderful customers all across the United States and Canada" with what it calls "small-town friendly service" and the slogan "Bringing Back Yesterday in Quality & Service since 1978!" Its catalogue covers porch components, listing porch posts, columns, newel posts, balusters (spindles), rails and handrails, brackets, spandrels, running trim, gable decorations, kickspace blocks and porch flooring, alongside solid-wood screen and storm doors, cedar shingle siding, roof spires, finials, shutters, louvered vents, sunburst fans, interior stair parts, and interior trim such as baseboard, beadboard and V-groove, door and window casings, corner and base blocks, crown mouldings and ceiling medallions. Materials named include cedar, hemlock, redwood, pressure-treated YellaWood, polyurethane, and AZEK and TimberTech cellular PVC and composite lines, for which the site reproduces the manufacturers' "Lifetime Limited Warranty and Fade/Stain Warranty" coverage and installation guides. It states that "Most items now available in synthetic woods that look, feel, and sound like painted wood but never crack, warp, or rot!" For do-it-yourself buyers it offers an "Online Porch Guide", casing and baseboard installation manuals, baluster and beadboard calculators, a free personalised porch consultation and a free porch design book, plus gift certificates and a guarantee promising "a prompt, courteous refund" to any customer not satisfied before finishing, modification or installation. An environmental-commitment section argues harvesting keeps private land forested, noting that "70% of US forests are privately owned, and 90% of the wood harvested in the US is from these private forests." The company describes itself as "still handcrafting from solid wood." As described on vintagewoodworks.com, read 23 September 2026.

The pages crawled here are International Paper's company-wide corporate site rather than a page for the Queen City, Texas operation; the crawled text never names Queen City or Texas, and individual sites are reachable only through unexpanded "Locations" and "Where to Find Us" navigation links, so nothing on these pages describes the Texas plant itself. The company presents itself as "International Paper (NYSE: IP; LSE: IPC) is the global leader in sustainable packaging solutions," adding that "Together with our customers, we make the world safer and more productive, one sustainable packaging solution at a time." Its listed products and services cover corrugated packaging, bulk packaging, solid fiber, sheets, retail packaging and display, containerboard, recycling solutions and recyclable materials, an OrderIP ordering system, and packaging services spanning structural design, graphic design, printing, testing, fulfillment and assembly, and mechanical packaging, aimed at eCommerce, food and beverage, grocery and retail, manufacturing, personal care, and shipping and distribution customers. The structural design page states the company employs "a globally connected team of 250+ designers utilizing over 1.8 million designs," and describes a Cost Savings Value Creation (CSVC) evaluation process, a CPSconnex design portal, 3D renderings, IP4D augmented reality models, and "Box 101," a two-day training session at its Customer Commitment Center in Aurora, IL. Graphic design work is supported by a photo studio and soundproofed media room at a Memphis, Tennessee customer commitment center. Print offerings listed are digital, litho lam and litho label, direct print, preprint, and inks and plates. News items mention the acquisition of North Pacific Paper Company, a new packaging facility in Mississippi, and being named one of the "2026 World's Most Ethical Companies." As described on internationalpaper.com, read 23 September 2026.

The site reached for this listing is sonoco.com, the corporate site of Sonoco Products Company, and the pages read describe the global packaging business rather than the Jefferson, Texas plant named in this record, which is not mentioned anywhere on them. The company says it has “been around since 1899” and “traces its roots back to 1899 in the small town of Hartsville, South Carolina,” and describes itself today as “a multi-billion-dollar enterprise with approximately 22,000 employees working in 265 operations in 37 countries.” The North American home page bills “125+ years of excellence” and states that Sonoco provides “innovative packaging solutions across various industries, including beauty and personal care, food and beverages, pet care, household products, construction, electronics and appliances, and healthcare.” The product navigation is the closest the pages come to the wood spools recorded for this listing: under industrial packaging it carries a “Reels, Spools & Plugs” category that includes wood reels alongside plastic spools and reels, polyfiber reels and steel reels. A recycling page adds that “we pick up wooden reels FREE, saving you time and money while preserving our natural resources,” and that “Sonoco Recycling has been collecting thousands of truckloads of viable used reels for over 20 years. We repair, refurbish and return the reels to circulation for reuse.” The services pages otherwise cover recycling — the company calls itself “a leading top 10 U.S. recycler” collecting “3 million tons of paper and other materials annually” — and in-house design and testing. The pages give no address, phone, capacity, staffing or hours for the Jefferson site, and say nothing about buying timber or logs, a minimum tract size, or certifications applying to this plant. As described on sonoco.com, read 23 September 2026.

The pages gathered for this listing are West Fraser Timber Co.'s corporate website, not a site for the Nacogdoches operation, so what follows describes the parent company; the web address carried on this record, norbord.com, now leads to that corporate site, and West Fraser says it acquired Norbord, "the world's largest OSB producer," in 2021. West Fraser calls itself "a diversified global wood products company producing renewable building materials" and "one of the world's largest producers of renewable wood building products, with more than 50 facilities in Canada, the United States, the United Kingdom and Europe." Its quick facts list roughly 10,000 employees, 32 lumber mills, 15 OSB mills, 9 engineered wood mills and 2 pulp and paper mills. Products named are OSB, lumber, plywood, LVL, MDF, particleboard and pulp, with sourcing and harvesting practices the company says are "backed by globally recognized forest certifications." The history pages trace the business to September 1955, when the Ketcham brothers bought Two Mile Planing Mills Ltd. in Quesnel, B.C., for $60,000; the West Fraser name was applied in 1958 and adopted company-wide by 1966. The company states it accelerated U.S. expansion in 2007 by acquiring 13 mills in states including Texas, becoming "the largest softwood lumber producer in North America," and that it marked its 70th anniversary in 2025. Its stated values are safety, integrity, frugality, competitiveness, fun, teamwork, humility and trust. Nothing on the crawled pages refers to Nacogdoches. As described on westfraser.com, read 23 September 2026.

This Schertz, Texas listing resolves to ufpi.com, the single corporate site shared by the whole UFP Industries group (the company was known as Universal Forest Products until a 2020 rename), so everything below is company-level material rather than anything about the Schertz site, which the crawled pages never mention. The site presents UFP as a manufacturer whose heritage “goes back to our founding in 1955,” when Universal Forest Products incorporated with factory-built housing as its sole market, and which today describes itself as “a family of businesses that combines innovation, logistics, design, engineering, and value‑added solutions to solve complex challenges.” Its four operating segments are Retail Solutions, Packaging, Construction and International, selling products used in residential and commercial construction, outdoor living, packaging and other industrial applications. The history page traces the milestones behind that range: first treated lumber in 1978 and a claim to be “one of the world’s largest lumber pressure-treaters”; the first load of treated lumber shipped to a then-new Home Depot in 1979; entry into site-built construction in 1997 through acquisitions in Pennsylvania, Texas and Colorado; becoming “the nation’s largest site-built residential truss manufacturer” in 1998; composite decking and the Deckorators railing brand from the early 2000s; and, after acquiring PalletOne and Spartanburg Forest Products in 2021, being “the largest pressure treater in the world.” Stated scale is 196 locations worldwide and over 14,000 employees. As described on ufpi.com, read 23 September 2026.

The web address on file for this Silsbee, Texas operation resolves to ufpi.com, the company-wide corporate site of UFP Industries, the parent formerly named Universal Forest Products - not a page about the Silsbee plant. Nothing on the pages read names Silsbee, gives a Texas phone number or address, or describes what is made there; the single Texas reference in the whole site is a 1997 history entry saying the company "enters the site-built construction market with acquisitions in Pennsylvania, Texas and Colorado." What the corporate site does say is this. "Founded in 1955 as Universal Forest Products, we started by supplying lumber to a single market: factory built housing. Over time, as our customers' needs evolved, so did we." Today it describes itself as "a family of businesses that combines innovation, logistics, design, engineering, and value-added solutions to solve complex challenges," supplying "thousands of products that support the world's physical infrastructure." It reports more than 15,000 people and hundreds of affiliates, and posts headline figures of 196 locations worldwide, 14,000+ employees, $6.3 billion in net sales for 2025, 33 years as a publicly traded company and 71 years of service, trading on NASDAQ as UFPI from a Grand Rapids, Michigan headquarters. Its four operating segments - Retail Solutions, Packaging, Construction and International - "manufacture and sell a wide variety of value-added products used in residential and commercial construction, outdoor living, packaging and other industrial applications worldwide." The company's history page traces pressure treating to its Auburndale, Florida plant in 1978 and claims UFP is now "one of the world's largest lumber pressure-treaters," with the 2021 Spartanburg Forest Products acquisition making it "the largest pressure treater in the world"; the 2020 acquisition of PalletOne is described as bringing in "the leading manufacturer of new pallets in the U.S." The name change from Universal Forest Products to UFP Industries is dated to 2020. Culture pages stress "No Mission Statement. Just People on a Mission," promoting from within, and an average senior-executive tenure of 23.3 years. Recent newsroom items listed are about expanding structural packaging capacity in South Carolina and acquisitions extending PalletOne's pallet network - again, none about Texas. As described on ufpi.com, read 23 September 2026.

This listing is a Texas treating plant, but the only site reached was ufpi.com, the corporate site of UFP Industries, and nothing on the pages read touches the Huntsville operation: no local address, no local telephone number, no description of the plant, its capacity or what it runs. The register still carries the company's earlier name, and the About page accounts for that, saying the business was "Founded in 1955 as Universal Forest Products" and that it "started by supplying lumber to a single market: factory built housing." That 1955 date belongs to the corporation rather than to this plant, so no founding year is recorded for this record. The history page does show when the parent entered the work this listing describes: under 1978 it says "the company's Auburndale, Florida plant produces Universal's first charge of treated lumber," and adds that "today, UFP is one of the world's largest lumber pressure-treaters"; under 2021 it says the acquisition of Spartanburg Forest Products made "UFP Industries the largest pressure treater in the world." The corporate name changed in 2020, when "Universal Forest Products changes its name to UFP Industries" and the company reorganised into market-based segments, now given as Retail Solutions, Packaging, Construction and International. Head office is 2801 East Beltline NE, Grand Rapids, Michigan, and the home page reports "196 Locations Worldwide," "14,000+ Employees & Growing" and "$6.3 Billion Net Sales 2025." A reader looking for what the Huntsville plant treats, what sizes it handles, whether it sells locally or whether it buys timber in the area will find none of it on these pages. As described on ufpi.com, read 23 September 2026.

East Texas Truss, LLC describes itself as “a family-owned and operated business specializing in the custom engineering and precision manufacturing of high-quality wood truss systems for residential and commercial construction,” working under the tagline “The Only Limit Is Your Imagination.” The single page reached states that it has been “proudly serving Texas and Louisiana since 1992” and that it supplies “wholesalers, contractors and the general public.” On capability, it says it designs and manufactures “roof trusses spanning up to” 70 feet and “floor trusses up to 35 feet,” which it presents as “ensuring superior strength, reliability, and efficiency for a wide range of structural applications.” Those spans are truss dimensions, not any kind of land or order minimum. The product menu lists common, scissor, attic, vault, cathedral and mono roof trusses, floor trusses and hip systems, and a banner invites enquiries about “our new architectural/engineered timber trusses.” The site says its primary service area is Texas and Louisiana, where it works “closely with builders, contractors, and developers,” and that it also has “the capability to ship nationwide.” A short marketing section argues that engineered trusses lower material costs through clear spans, eliminate interior bearing walls, beams and columns, provide “low cost engineering and windstorm solutions,” and reduce labour and waste. The page carries a toll-free number, 1-800-256-2276, rather than the local Hillister number in this listing, and gives no street address. It names no engineering registrations, no truss plate supplier or third-party certification such as a quality-control programme, no lead times, and no pricing or quoting procedure beyond “call for details.” As described on easttexastruss.com, read 23 September 2026.

Houston Hardwoods, Inc. describes itself as a lumber yard and custom milling business on West 34th Street in Houston. Its about page states that “Tim McCoy (president) and Guy Pike (vice president) founded Houston Hardwoods in 1990”, that in the first year the two men “handled every aspect of the company themselves, from buying & selling to milling & delivering”, and that the business now “operates from a 50,000 square foot location that includes office space with approximately 20 employees.” It says moulders were added to the equipment line after the first five years and that “the company’s two SCMI moulders streamline the production process.” On stock, the site offers “hardwoods, exotic woods, cabinet and marine grade plywood, MDF, melamine, softwoods”, edgebanding and veneer, claims “one of the largest selections of custom mouldings in Texas” with a database of “3,000+ profiles”, and states a moulding turnaround of “1-2 days”. The services page sets out milling to customer specification — S2S, S2S1E, S4S and SLR1E — with “Sanding – Max width 42”” and “Resaw – Max width 15””, and says customers can “purchase time on our equipment, like our wide belt sander”. Delivery runs “throughout Greater Houston and surrounding areas”, with the note that “if you’re within approximately 90 miles of us, we likely serve your location.” Staff are listed by years of industry experience and university degrees rather than trade certifications, and the company reports membership of the Lumbermen’s Association of Texas & Greater Louisiana and the Greater Houston Lumber & Building Materials Association. The pages carry no price list, no minimum order and no account of how a job is quoted beyond an invitation to contact the yard. As described on houstonhardwoods.com, read 23 September 2026.

New Earth Soils & Compost is a biomass energy business in Conroe, Texas, and it also lists itself as a mill. Biomass is wood and other plant material used as fuel. The business's listed services are a biomass, wood pellet or landscape organic facility, and mulch. A wood pellet facility presses ground wood into dense fuel pellets, and mulch is wood ground fine for beds and paths. New Earth Soils & Compost lists cypress, eastern red cedar, mixed hardwood, and southern yellow pine. It also lists hardwood and softwood as broad groups. The county it names is Montgomery. It suits a landowner in Montgomery County with cedar, cypress, pine, or mixed hardwood to move, who wants a buyer for wood going to fuel, pellets, or mulch. From newearthcompost.com, read 18 October 2026.

Precision Gun Works, Inc. manufactures semi-finished replacement gunstocks under the banner "Finest Quality Semi-Finished Gun Stocks Since 1979." The company's own history says it began as Columbia Precision Woodworking in Uvalde, Texas in 1979, when Charlie Jones purchased the business and began making precision-machined buttstock patterns using his personal rifle collection as models, working with his son Gary; the pair added other rifle and shotgun stocks, moved the business to Kerrville, Texas and expanded the manufacturing facility, and in 1993 bought a "highly precise, state-of-the-art, twelve-spindle Italian carving machine." Gary Jones purchased the business from Charlie in 1998, and the company says it now markets several thousand pieces each year. All stocks are made from American black walnut selected from the midwestern United States, properly dried and hand-selected before machining; the firm states it offers no other species, machines quarter-sawn or edge grain where the blank allows, and does not cut buttstock and forearm from the same blank, though it matches sets as closely as it can. Stocks are fully contoured, machined approximately 1/16" oversize with inletting left slightly tight (about .005 to .010"), left unfinished and undrilled, and are said to be smoothed by an exclusive "SmoothCut" carving process; the company is explicit that its stocks "will not 'drop-in fit' any rifle or shotgun." Patterns cover Winchester, Marlin, Remington, Stevens, Colt, Rossi and cowboy action models, plus buttplates and other products. It is not machining fancy or figured wood, customers' wood, custom stocks or single-copy duplication, and states that "IF YOU DO NOT SEE AN ITEM LISTED, WE DO NOT MANUFACTURE IT." Sales are internet-based through the website only, with no telephone sales, consultation or walk-in retail outlet. As described on precisiongunstocks.com, read 23 September 2026.

Only the home page of Smith Wood Products answered the crawler, so everything here comes from that single page. It presents the company as a custom wood products and woodworking shop in Fort Worth, headed “Ready to turn your ideas, out of wood!” Under “Why Choose Smith Wood?” the page claims “Nearly 50 years of experience (since 1976),” a “Turnkey approach, simplifying the entire process,” and custom woodworking expertise — “We specialize in bringing your conceptual ideas to life” — together with material versatility, saying the shop is “Capable of incorporating other mediums into custom product designs and secondary operations.” A product strip names dowels, custom wood turnings, wood mouldings, flag and banner parts, wood handles, and wood balusters, columns and stair parts, with a gallery link for the rest. The page offers a free quote, describes the business as a “USA Company” with “Fast Shipping” and online support, and gives a head office at “4220 Clay Ave” in Fort Worth with a single phone number; the footer carries the corporate name “Smith Wood Products LTD.” One customer testimonial, signed with a first name and a Boston address, is printed on the page. The page states no species handled, no production capacity, no certifications, no staff credentials, no minimum order quantity, and no basis for pricing beyond the request-a-quote form — and no about or gallery page was reachable to fill those gaps. As described on smithwood.com, read 23 September 2026.

AES Custom Wood's site describes a family millwork shop in Grand Prairie working for the Dallas–Fort Worth homebuilding market. A banner on every page reads “Proudly Serving North Texas Since 1981,” and the About page gives the origin: “A.E.S Custom Wood, was founded in 1981 by Arvil E Smallwood,” who obtained “facilities in Grand Prairie, TX and setting up shop” and “began producing Fireplace mantels after contracting with a local new home builder.” That remains the core of the work — “offering DFW area new homes quality Fireplace Mantels” — and the page says the range has widened since: “we now offer everything from fireplace mantels, outdoor pergolas, custom cabinets and cutting boards.” It states that “over the 35+ years our company remains a family owned and operated business,” a figure that has not been brought up to date against the 1981 founding given on the same page. The page closes, “If you can dream it, we can build it.” Enquiries go to a single office line, (972) 262-0755, through a short contact form, with a gallery as the only other section. The pages read are brief. They say nothing about the species or sourcing of the wood used, nothing about lead times, pricing or how a job is quoted, and name no certification, grading body or trade membership. There is no mention of buying timber or of any minimum job size. As described on aescustomwood.com, read 23 September 2026.

Abilene Millwork says it designs and creates one-of-a-kind cabinets, countertops and architectural wall coverings, serving both residential and commercial clients. Its offices and millwork shop stand in the Historical Downtown Warehouse District of Abilene, Texas, in the building that once housed Abilene Sash & Door Company, and the company states that since 2000 it has been part of different projects, providing not only fine cabinetry but also design solutions. It sets out its process in three steps: designers draft the project and source materials intended to stay within the budget, the pieces are built at the company's own manufacturing facility in downtown Abilene, and its installation crews fit the finished work. On countertops it offers stainless steel, wood, solid surface or MDF core, each piece cut to the customer's own dimensions. Its woodworking covers custom cabinetry, wall coverings, countertops and other features, and it names First Financial Bank, Abilene Christian University, Abilene ISD and Wylie ISD among its clients, adding that no job is too big or too small and that every job is custom built to suit the space. Free estimates are available while a construction budget is being drawn up. Enquiries are taken by telephone on 325-677-8856 or through a form on the contact page, which asks whether the interest is general commercial work, cabinetry and countertops, or architectural wall covering; the shop address given is 533 Plum St., Abilene, TX 79601. As described on abilenemillwork.com, read 23 September 2026.

Alamo Hardwoods is a lumber supplier and millwork shop at 1 Fredericksburg Road in San Antonio, Texas, which says it has "handled Central and South Texas' millworking, molding and other custom woodwork needs since 1921" and is "still providing the lumber San Antonio is made of." The company states that it houses "one of the most varied soft, exotic wood and hardwood lumber supplies Texas has to offer," publishes a list of the hardwoods it offers, and highlighted cypress, walnut and zebra wood as a month's top sellers. Alongside lumber sales it offers custom millworking, custom moldings that can match a historical property, fireplace mantels, and custom and butcher block countertops, plus work on historic structures, saying that "With our experience and expertise, your vintage property will remain vintage." Its design services page states that "In nearly a century of business, we've done just about everything," listing custom design work covering furniture, cabinets, fireplaces, surrounds, pediments, banisters and "Boat and aircraft interiors," and says its designers can work from blueprints and detailed designs or from a sketch or a description. The company says it is staffed by "architecture graduates and students, forestry specialists, design experts, and second- and third-generation veterans of the soft and hardwood supplies industry" and describes itself with the line "We're not salesmen — we're craftsmen." A molding profiles catalog is offered for download to design professionals and contractors, and visitors are invited to the showroom for a guided tour of what it calls a "veritable shrine to hardwood!" Hours are Monday to Friday 8:00 a.m. to 5:00 p.m. and Saturday 8:00 a.m. to noon. As described on alamohardwoods.com, read 23 September 2026.