Mills

Phil Etienne's Timber is a timber buyer in St Croix, Indiana. It has a Google Maps business listing in that category. It is also listed as a logging contractor and a mill. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

WhiteWater Ranch Log Yard is a timber buyer and sawmill in Liberty, Indiana, operating as WhiteWater Ranch LLC. They work with landowners and farmers to improve and maintain standing timber through select cuts carried out throughout the year, describing their lumber as "Ethically Sourced Lumber." The timber they buy goes to their own sawmill, where it becomes lumber, slabs, posts, beams, mantels, and custom sawn lumber. They buy walnut, white oak, black locust, cedar, maple, and osage orange, among other species. Work can include timber stand improvement and harvests as well as straight select cuts, aimed at building yearly cashflow for a farm or ranch. They hold a license as a Licensed Timber Buyer in Indiana. They purchase logs either at the mill site or by arranging pickup at your location, measuring and scaling logs on location and using low impact logging methods. They serve Union County. The smallest job they describe is a single log, where "you can be paid the same day even if it is a single log," so that is the scale they say they can take on. This suits a landowner with just a few trees worth cutting, or one looking for ongoing select cuts and timber stand improvement over the years, more than someone with a single large one-time harvest to manage. From wwrllc.com, read 8 October 2026.

Sky Valley Sawmill & Kiln is a sawmill in Bluffton, Indiana, serving Wells County. It takes logs or lumber and mills any species, any size, up to 30 feet long and up to 7 feet 2 inches in diameter. Work can come back live edge, kiln-dried or raw, and the custom shop turns out mantles, shelving, tables, bookshelves, barn doors, beams and gables, charcuterie boards, and picnic tables. Pricing runs by the board foot, with bulk discounts and pickup and delivery available. The mill itself goes back to 1886, built by Sinker-Davis in Indiana and settled in Amish country since 1974 under its current sawyer, Allen "Swamp" Harris, a master carpenter and general contractor who has run C.A. Harris Construction since 1999. The business is veteran-owned. No minimum size job is shown; the smallest work shown is not for sale, so there's no small lot floor to point to here, just a mill set up to handle any size that comes in. This fits a landowner near Bluffton who wants logs turned into finished lumber or custom woodwork, not one looking for standing timber purchased or logged off the land. From skyvalleysawmill.com, read 8 October 2026.

Flodder Sawmill is a mill in Greentown, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Lakey Family Sawmill is a mill in Daleville, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Hall & Sons Hardwoods LLC is a mill in Decatur, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Bent Tree Custom Sawing LLC is a portable sawmilling business based in Churubusco, Indiana. If you've got logs on your own ground, "we bring the sawmill to you" rather than making you haul them out. They run a Woodmizer LT40 Wide, which they say handles larger logs than most mobile mills can take, so oversized yard trees or oak logs too big to move aren't wasted. The work covers portable sawmilling done right on your property, custom lumber cuts, dimensional rough-sawn lumber, thick mantels, unique geometric cuts, and live edge slabs for furniture or tables. Oak is the species they name specifically. To start a job, you send them details on your logs or project and they come back with an estimate. They're a family-owned outfit serving Fort Wayne and the surrounding Northern Indiana area, with Churubusco, Warsaw, and Kendallville named as places they reach, and Allen County as their listed service county. Their own words on how they work: "Your Tree, Your Table" sums up their approach to turning a landowner's log into something useful back on that same property. This fits a landowner with a log or two already down, or a prized tree that needs taking care of on-site, rather than someone managing a standing timber sale across many acres. From benttreecustomsawing.com, read 8 October 2026.

Pike Lumber Company, Inc. is a consulting forester in Akron, Indiana. It has a Google Maps business listing in that category. It is also listed as a timber buyer, a logging contractor and a mill. A consulting forester works for the landowner, not the buyer. A listing here is not an endorsement.

Holmes & Co Inc runs a sawmill in Columbia City, Indiana, and also buys timber. They've been at it since 1946, starting out as a small hardwood mill and growing into a full operation with dry kilns, pre-dryers, a wood fire boiler, a band mill, and a steam vat for walnut. They work mainly in hardwoods: walnut, ash, red oak, white oak, cherry, basswood, poplar, hard and soft maple, and hickory. Most of their timber comes from within 200 miles of the mill, across Ohio, Michigan, Illinois, and Indiana, and they're listed as serving Whitley County specifically. They cut heavy stock, from 4/4" up to 16/4", and say they're "one of the few operations that offer 12/4\" to 16/4\" stock." That kind of thick lumber takes real patience. They also run a retail store open to the public if you want to see what comes off their mill, and they ship some of their output overseas by container. They belong to the National Hardwood Lumber Association and the Indiana Hardwood Lumbermen's Association. If you're a landowner with hardwood timber, especially walnut, oak, or cherry, and you're within reach of their Columbia City yard, this is a mill set up to handle real volume and turn it into finished lumber rather than just moving logs. It suits someone selling standing timber who wants to deal with an outfit that processes wood itself, not just a broker passing it along. From holmescompanyinc.yolasite.com, read 8 October 2026.

Helmsburg Sawmill, Incorporated is a mill in Nashville, Indiana. It has a Google Maps business listing in that category. It is also listed as a logging contractor and a timber buyer. A listing here is not an endorsement.

Amos Hill Associates Inc is a sawmill and timber buyer in Edinburgh, Indiana. Their own pages describe the work as "Timber Purchasing Production Veneers," so they buy standing timber, run it through production, and work with veneers. For a landowner, this means Amos Hill is set up to handle the sale of your timber from the purchase through to milling it into veneer-grade material. They serve Johnson County. There's a phone number listed, (812) 526-2671, for reaching them directly, including for trucking and delivery questions if you're hauling logs to their yard. No tract size, species list, founding date, or credentials are stated, so if those details matter to you, you'd want to call and ask. This fits a landowner who has timber they think may be veneer quality and wants a buyer who also mills, rather than someone who only brokers logs to someone else. From amoshill.com, read 8 October 2026.

Carsons Lumber Mill is a mill in Sunman, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Bonesteel Portable Sawmill & Molding is a mill in Sellersburg, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Southern Hardwoods is a sawmill in Bennington, Indiana. It cuts pallet lumber, rough cut lumber for horse fencing and barns, crane mat material, and railroad ties, and it also sells wholesale lumber, firewood slabs, and sawdust. It takes custom cut sawing jobs too, and it saws around 32,000 board feet a week. The business describes itself as "specializing in pallet lumber and rough cut materials for horse fencing, barns, and wholesale needs." Daniel Byler started the mill as Byler Lumber in Newport, NY in 1989, then moved to Bennington, Indiana in 2009 and opened it as Southern Hardwoods Inc. That makes 35 years in the sawmill business altogether, 20 in New York and 15 in Indiana. It serves Switzerland County. This fits a landowner who already has logs cut or wants rough lumber, fencing material, pallet stock, or ties produced, rather than someone looking for help marking and selling standing timber. From southernhardwoodsinc.com, read 8 October 2026.

C C Cook & Son Lumber Co is a mill in Reelsville, Indiana. It has a Google Maps business listing in that category. It is also listed as a timber buyer and a consulting forester. A listing here is not an endorsement.

Danzer Veneer Americas runs a sawmill and veneer plant in Edinburgh, Indiana, and serves Johnson County. Danzer produces sliced veneer, lumber, and "innovative value-added wood products for decorative applications in high-quality furniture, automobiles, and interior architecture." The work includes sliced veneer, lumber, 3D-Veneer solutions, and custom wood engineering. Species handled include Walnut, White Oak, Red Oak, Maple, Cherry, White Ash, Poplar, Hickory, and Birch. Danzer operates production sites in hardwood regions across North America and Europe, with named locations in Indiana, Pennsylvania, Canada, the Czech Republic, and Germany. The company holds PEFC certification and lists sustainable forest management among its specialties. Danzer was founded in 1932 and has operated for over 90 years. It's a large-scale operation built around veneer slicing, sawn hardwood, and engineered wood, not a one-truck local logging outfit. A landowner with standing timber in walnut, oak, cherry, or the other species listed, and who wants to sell to a company with its own mill and veneer production rather than a broker, would be the one to look here. From danzer.com, read 5 October 2026.

Swartzentruber Sawmill, LLC dba Phoenix Mat is a mill in Odon, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Timber Hollow Sawmill is a mill in Kosciusko County, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Graber's Band Mill is a mill in Odon, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Coomer & Sons Sawmill is a family-owned mill in Frankfort, Indiana, running since 1978. It buys hardwood logs from logging contractors, sometimes sending its own trucks out to a logging job or wood yard to pick them up. The main business is pallets, cut from cottonwood, hickory, poplar, maple, and oak, with most of them heat-treated for companies that ship overseas. Most pallets come off an automated nailing machine, turning out between 1,800 and 2,000 a day, but custom pallets, small orders, boxes, and crates are still built by hand with pneumatic nailing tools. Nothing goes to waste either: the leftover wood and bark become mulch, and the sawdust gets sold too, with demand for each shifting between the warm months and the cold ones. The business serves Clinton County. There's no stated minimum tract size, but this is a mill built around pallet-grade hardwood logs bought from contractors and wood yards, not a timber-sale operation that walks your acres with you. It fits a landowner who already has logs cut or lined up and wants a long-running Indiana mill, one that calls itself "a family-owned mill dedicated to providing high-quality lumber pallets," to buy and process them. From coomerandsonssawmill.com, read 8 October 2026.

Pingleton Sawmill Inc is a mill in Greencastle, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

True Timber Sawmill LLC is a sawmill in Nappanee, Indiana. It takes on custom saw milling, kiln drying, grade lumber, mortise and tenon timber, and lumber drying. This is a mill, not a timber buyer or a logging crew, so it fits landowners who already have logs, or lumber, and want them cut, graded, or dried rather than someone to come harvest standing trees. They describe themselves as "custom saw milling, kiln drying, grade lumber, mortise and tenon timber, and lumber drying," and their specialties are custom saw milling and kiln drying. They serve Elkhart county and the surrounding counties, and are also noted as serving St. Joseph county. The business was established in 2020. This fits a landowner in that part of Indiana who has logs ready to go and wants a local mill to turn them into grade lumber or kiln-dried, mortise and tenon timber, rather than someone looking for help selling standing timber or arranging a harvest. From timbersawmill.com, read 8 October 2026.

Hollingsworth Lumber is a sawmill and lumber yard in Russiaville, Indiana. They saw their own native lumber in house and also take in custom sawing, turning a landowner's logs into usable boards. Their millwork side can plane, straight line rip, sand, thickness resaw, and run custom moulding, with a CNC service too. They say "we have capability to duplicate almost any custom trim profile and can produce any standard trim profile from any species of lumber." Species they work with include cedar, ash, basswood, birch, maple, walnut, and oak, along with pine, inland red cedar, and exotics like teak, zebrawood, purple heart, ipe, and bubinga. They also produce hardwood flooring, interior doors, exterior wood siding, and wood fencing, with a noted niche in fencing for horse farms. They list Howard County as an area they serve. Hollingsworth Lumber has been family owned and operated since 1937 and is now in its 4th generation of family ownership. This fits a landowner who already has logs or standing timber sawed and wants the lumber turned into flooring, trim, siding, or fencing, rather than someone just looking for a buyer to purchase standing timber outright. From hollingsworthlumber.com, read 8 October 2026.

Tri-State Hardwood Co Inc is a mill in South Milford, Indiana. It has a Google Maps business listing in that category. It is also listed as a timber buyer. A listing here is not an endorsement.

Wakarusa Sawmill Inc is a mill in Wakarusa, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

C & L Lumber is a mill in Huntingburg, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Knies Sawmill Inc is a mill in Huntingburg, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Eadsville Sawmill is a mill in Urbana, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Bryant's Sawmill is a mill in Greentown, Indiana. It has a Google Maps business listing in that category. It is also listed as a timber buyer. A listing here is not an endorsement.

VTV Sawmill is a sawmill and woodworking shop in Greentown, Indiana. It saws logs into lumber and also builds finished pieces from the wood. The work started on a family tree farm, where Vance and his dad began cutting down ash trees that had already died. After buying a Wood-Mizer sawmill in 2018, Vance and his wife set out to build "the bigger dreams he had always envisioned," cutting their own wood for flooring, cabinets, and trim at home. Vance passed away in 2021, and his wife now runs the sawmill and the woodshop, saying "I am now running the sawmill and working in the woodshop." VTV Sawmill works with ash and is based in Greentown, with Howard County named among the areas it serves. This suits a landowner near Greentown with ash on the property who wants it sawn into lumber, or even worked into something for the house, by a small operation built on a family's own tree farm. From vtvsawmill.com, read 8 October 2026.

DGC, Inc. is a mill in Sheridan, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Superior Hardwoods is a mill in Montezuma, Indiana. It has a Google Maps business listing in that category. It is also listed as a timber buyer. A listing here is not an endorsement.

Restoration Sawmill and Hardwoods is a sawmill in Lafayette, Indiana, serving Tippecanoe County. They work with logs brought to them or they bring a portable sawmill to you, and they also keep kiln-dried lumber on hand along with live edge slabs, millwork, and custom furniture. Species they handle include walnut, ash, red oak, cherry, hard maple, white oak, hickory, poplar, hackberry, and cedar. Their shop can dimension lumber S4S up to 14 feet long and 20 inches wide, flatten slabs and table tops up to 56 inches wide and 13 feet long, and run four-sided molding for trim, tongue and groove, and flooring. For logs, you can set up an appointment for custom milling at their shop, or they will travel to you with the portable mill. The business is "a ministry of Faith Church," started in 2016, and the sawmill side has run since 2017 as a way to give men in their recovery program a second chance through learning a trade. One customer described having a family tree milled into furniture, calling the business a "one-stop-shop" for that job. This fits a landowner near Lafayette with logs or standing timber who wants lumber sawn, dried, or turned into furniture, and who doesn't mind that the work supports a residential addiction recovery program. From restorationlafayette.org, read 8 October 2026.

Conner Sawmill is a mill in Walton, Indiana. It has a Google Maps business listing in that category. It is also listed as a timber buyer and a logging contractor. A listing here is not an endorsement.

Cole Hardwood Inc is a hardwood sawmill and processor in Logansport, Indiana, in Cass County. It's not set up to walk your woods and mark trees. What it does is take rough lumber in at its Logansport yard and carry it through to a finished, dried, planed board, delivered to the buyer on its own trucks. As they put it, work there runs "on site, on time, on budget." The yard handles planing and what they call "S2S/SLR1E capabilities," meaning lumber can come out surfaced and ready to use, not just rough-cut. They run a big kiln, rated at 1,300,000 board feet of capacity, and keep what they describe as one of the larger one-site hardwood inventories in the Midwest. Deliveries go out by company-owned truck within a 300 mile radius, reaching customers across the Midwest. Milt Cole founded the company in 1986, so it has been running under that name for decades. It belongs to a stack of trade groups: the National Hardwood Lumbermen's Association, Indiana Hardwood Lumbermen's Association, Appalachian Hardwood Manufacturer's Inc., Hardwood Distributor's Association, Kentucky Forest Industries Association, Lake States Lumber Association, and American Hardwood Export Council. This fits a landowner who already has logs or rough lumber cut and is looking for a mill to dry, plane, and move volume, rather than someone needing a crew to come fell trees on raw acreage. From colehardwood.com, read 8 October 2026.

Indiana Wood Products Inc is a mill in Middlebury, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Dutch Creek Sawmill is a mill in New Pekin, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Salem Hardwood Lumber Sawmill is a mill in Salem, Indiana. It has a Google Maps business listing in that category. It is also listed as a timber buyer. A listing here is not an endorsement.

Robinson Lumber Company is a sawmill and lumber business with a concentration yard in New Albany, Indiana. The company itself is headquartered in New Orleans, Louisiana, but the Indiana yard is what matters if you're nearby in Floyd County. It's been family run since 1893, now in its fifth generation. This isn't a business set up to buy standing timber off your back forty or walk your woods with you. What they do is process green lumber into kiln dried lumber and strips, with the New Albany yard sitting in what they call "the best White Oak and Hickory region in North America." Their kilns run computer controlled, with stacking, surfacing and ripping done in house to get a "consistently superior quality product, uniform in color and texture." Species handled include White Oak, Hickory, and a long list of hardwoods and pines from their other operations, plus imported woods like Mahogany and Jatoba. They hold Forest Stewardship Council certification. Nothing here says they take on small private tracts or do logging jobs for individual landowners. This looks built for mills, suppliers, and buyers further down the wood products chain, not for someone with a woodlot wondering who to call about a one-time harvest. From roblumco.com, read 8 October 2026.

Roll's Custom Sawing and Lumber is a mill in Salem, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Salem Hardwood Lumber Co is a sawmill in Salem, Indiana, working out of State Road 56 East. They describe themselves as "Manufacturers of Quality Hardwood Products," which tells you where the logs end up once they leave your woods. They work in hardwood. Salem Hardwood Lumber Co serves Washington County. Beyond that, there's no breakdown of species or process spelled out, so if you want to know exactly how a sale would run, a phone call to 812-883-3314 is the way to find out. This is a straightforward listing for a landowner near Salem who wants a local hardwood mill to call, not a big write-up of services or credentials. If you want a lot of detail up front before you pick up the phone, you may want to look elsewhere, but if you just need a name and number for a Washington County sawmill, this is it. From salemhardwoodlumber.com, read 8 October 2026.

Indianapolis Wood Products is a family sawmill and kiln operation in Scottsburg, Indiana. They take White Oak logs and turn them into Rift, Quartersawn, Plainsawn, and Parallel Edge SLR2E lumber for manufacturers like cabinet shops, moulding plants, flooring plants, and architectural millwork companies. Their process runs from log selection through sawing, kiln drying, and straight-line ripping, with a net tally done after ripping. They also do fixed-width and component work using an Italian CML rip saw. They work mainly with Indiana and Appalachian White Oak, and the business lists Scott County as an area it serves, with its county of record as Clark, Indiana. The family has been in hardwoods a long time. The story goes back to log trading in Germany in 1954, and the Indiana operation was established in 1982. They call themselves "Three Generations in Hardwoods," now with a third generation involved in sales, production, and customer relationships. This fits a landowner whose trees are White Oak and who wants to understand how a sawmill turns logs into graded lumber, rather than a company that comes out and markets standing timber or manages a harvest on your property. From indianapoliswood.com, read 8 October 2026.

Indiana Hardwood Mills Inc is a sawmill in Martinsville, Indiana, on Egbert Rd. They are a manufacturer, turning hardwood logs into finished products: baseboard, casing, chair rail, moulding, doors, trim, and crown. They work in poplar, white oak, red oak, alder, cherry, hard maple, soft maple, hickory, birch, beech, ash, mahogany, and pine. They serve Morgan County. You can reach them by phone during business hours, Monday through Friday, 7:30 to 4:00, with the plant closed for lunch from 11:30 to 12:30. This fits a landowner whose timber has already been cut or milled and who wants finished hardwood trim and mouldings made, rather than someone looking for a company to buy standing timber or do the logging itself. From ihmills.com, read 8 October 2026.

Werner Sawmill Inc is a mill in Jasper, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Ledgerwood & Sons Sawmill is a mill in Coal City, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Green Valley Wood Products is a sawmill west of Brazil, Indiana, in Clay County. It's "a locally owned and operated sawmill," and alongside milling it also takes on logging work and wood shop services for people nearby. If you've got standing timber to sell, this is one of the outfits that will come look at it, in west central Indiana. Beyond buying and logging timber, they do log sawing (bring them logs and they'll saw them into lumber), kiln drying of green or air-dried lumber, and wood shop services like planing and sanding. Their own stock gives a sense of what passes through the mill: black walnut, red oak, osage orange, and a run of domestic hardwoods and exotics like Bolivian rosewood and red canarywood, much of it cut for turners, cabinetmakers, and other hobbyist woodworkers. They say "we specialize in lumber for the hobbyist" and will "custom-cut wood to your specifications." This fits a landowner in west central Indiana who wants to deal with a small, local mill that also logs timber and can custom-cut what comes off the land, rather than a large regional buyer. From gvwp.net, read 8 October 2026.

R. Booe & Son Hardwoods, Inc is a mill in Center Point, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Phillips Custom Sawmilling is a mill in Hendricks County, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Mader Mill, Inc. runs a sawmill in Spencer, Indiana, just off State Highway 43. It serves customers in Owen County, turning logs into industrial lumber products rather than buying standing timber from landowners. Mader Mill, Inc. describes its work as "turning logs into pallet cut stock, dunnage, and blocking" so that its customers can sell quality products and run efficiently. The mill produces customizable cut stock, handmade crates, and batten, dunnage, cribbing, and blocking for industrial use. Some customers use its blocking as a sacrificial layer when cutting limestone, and others use its cribbing to move products safely. The mill itself was built new, from scratch, and opened in 2019. Mader Mill, Inc. says its "flexible, modern technology lets us handle a variety of raw materials and produce materials of all sizes and types." This fits a landowner in or near Owen County, Indiana, who has logs to bring to a working sawmill for cut stock, crates, or blocking, rather than someone looking for a timber buyer or a forestry consultant. From madermill.com, read 8 October 2026.

Detweiler Forest Products is a mill in Rockville, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Baird Sawmill Inc is a mill in Rockville, Indiana. It has a Google Maps business listing in that category. It is also listed as a timber buyer and a logging contractor. A listing here is not an endorsement.

Coffey-Doige Hardwood Products is a mill in Spencer, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Eastern Red Cedar Products is a mill in Marengo, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Randall Lowe & Sons Sawmill is a mill in French Lick, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Posey Valley Hardwoods & Dry Kiln is a sawmill in Campbellsburg, Indiana, run by Delbert Loewen and Delwynn Loewen with their father, Jesse Loewen. It's listed as a mill, and the business itself describes it as "Family Owned and Operated." They started out custom sawing cedar logs for cabins, then moved into cutting walnut, and by 2009 they were buying different species of hardwood logs and selling lumber to manufacturers and wholesalers. These days they buy mostly black walnut logs. Their work covers kiln dried lumber, custom kiln drying, custom sawing, and hardwood landscape mulch, with species including cedar, walnut, black walnut, and other hardwood. They also note they turn out "cabinet and furniture grade lumber," so this isn't just rough-cut work, it's lumber aimed at finer projects. They serve Washington County and are found in the directory under Crawford County. The sawmill started in 2006, so they've been at it since then. If you've got logs to sell, lumber to dry, or a custom sawing job in mind, this is a smaller family operation rather than a broker or consulting outfit. It suits a landowner who wants their own logs turned into usable boards, or who wants to buy kiln dried hardwood, rather than someone looking for a timber sale appraisal or marketing help. From poseyvalleyhardwoods.com, read 8 October 2026.

Pride Hardwoods is a mill in French Lick, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Triple A Woodworking is a mill in New Salisbury, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Swartzentruber Bros. Sawmill is a mill in Montgomery, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Paul Knepp Saw Mill is a mill in Montgomery, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Forest Products Manufacturing Co Inc is a sawmill and hardwood component manufacturer in Jasper, Indiana. It takes in hardwood lumber and turns it into parts for the furniture and cabinet trade. The company describes itself as "a leading custom hardwood component supplier to the furniture and cabinet industry." The work includes precision machined dimension and furniture parts, kitchen cabinet face frames, stiles and rails, drawer fronts, edge glued panels, cut to size blanks, and hardwood base mouldings, stretchers, parting rails, legs, arms and feet. Lumber comes in green from local mills, is air dried, then kiln dried before it goes through the rough mill and finish mill for cutting, shaping, and sanding. The only species named is hardwood. It serves Dubois County and is found in the Daviess County listings. The company was founded in 1940 in Jasper and is now run by the third generation of the same family. It says it is "small enough to provide individual attention to all customers no matter what their size," and takes on both small run jobs and truckload quantities. This fits a landowner whose hardwood timber could end up as cabinet or furniture parts, rather than someone looking for a logger to walk their woods or a forester to mark a harvest. From forestp.com, read 8 October 2026.

Hoffman Sawmill Inc. is a mill in Jasper, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Switz City Saw Mill is a mill in Switz City, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Eicher's Sawmill is a sawmill and logging outfit in Hamilton, Indiana, run by Joe Eicher, his son, and four other employees. They buy standing timber, log it, clear wooded areas, and mill their own products like firewood, wood chips, and green sawdust. The work covers buying timber, logging, and clearing. Joe and his team will survey your property first and give you a free quote before anything happens. You get an estimate at the time of service, but payment comes after they write up the official quote. They do buy fallen timber if it meets their standards, but they won't take rotting or low quality wood, and they won't cut down yard trees since that risks the house or yard. On a job, they say "minimal damage to both your land and surrounding trees is a priority." Joe picks up timber within a 75-mile radius, and the areas named are Northern Indiana, Lower Michigan, and Western Ohio. For this directory, the county served is Steuben, with the business itself found in DeKalb County. Eicher's Sawmill has been running since 2012, when Joe started it at 24 years old after working at his brother-in-law's lumbermill. This fits a landowner near Hamilton or within that 75-mile reach who wants someone to walk the land, explain what the timber is worth, and clean up after the job without a lot of back and forth. From eicherssawmill.com, read 8 October 2026.

Vail Wood Products LLC is a sawmill in Butler, Indiana, run by Brady Vail since 2024. If you've got logs on your property and want them turned into something useful, this is a mill that cuts to order rather than selling you whatever's sitting on the shelf. They run a Wood-Mizer LX250 bandsaw mill that handles logs up to 55 inches across and cuts up to 54-1/2 inches wide, so even a big walnut or oak log isn't a problem. They mill more than 28 species, hardwoods like black walnut, white oak, black cherry, hickory, and ash, plus a handful of softwoods like white pine and cedar. Work includes custom milling, live-edge slabs, rough-sawn lumber and timbers, firewood, and kiln drying with a solar kiln. If your log is too big or valuable to haul, they'll bring a portable Alaskan sawmill to your property instead. You call, describe the project, drop off your log or schedule a site visit, and they cut it, usually in 1 to 3 days for simple jobs. There's no set minimum: "There is no set minimum order. We work with customers on projects of all sizes." They're based in DeKalb County and work out from there across Indiana, Michigan, and Ohio, though most lumber and slab customers pick up at the mill itself. Brady's background is in logging and tree work before starting the mill. This one suits a landowner with a log or two to turn into lumber, slabs, or firewood, rather than someone trying to sell standing timber off a larger tract. From vailwoodproducts.com, read 8 October 2026.

Whispering Pines Sawing is a mill in Auburn, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Frick Lumber Co Inc is a sawmill in Wawaka, Indiana, also doing business as Frick Lumber Company out of Brimfield. It's listed as a mill, and the work it does is making and wholesaling lumber, specifically kiln dried hardwood. If you've got hardwood trees on your land, this is the kind of outfit that would take the logs and turn them into kiln dried hardwood lumber rather than just buy standing timber off you directly. They describe themselves plainly as "Manufacturers and Wholesalers of Kiln Dried Hardwood Lumber," so that's the trade they're in. They serve Noble County. The business has been around a long time, calling itself "Family Owned and Operated Since 1924," so it's not a new operation. This fits a landowner in Noble County with hardwood timber who wants to deal with a mill that processes and sells hardwood lumber, rather than a logging crew or a forestry consultant who'd walk your woods and mark trees. If you're further afield or you're not sure your timber is hardwood, this may not be the right fit, but for hardwood owners near Noble County it's worth a call to (260) 761-3415. From fricklumber.com, read 8 October 2026.

Forks Lumber Co. is a timber buyer and saw mill in Middlebury, Indiana. A forester there buys standing timber and runs the mill on site, so you are dealing with the person who both prices your trees and cuts them. They work mainly in White Oak and Walnut, and they serve Elkhart County. The process starts with a free timber appraisal and consultation, which you can have customized to your woods. Their stated specialty is a "Guaranteed appraisal," meaning the dollar amount they quote you is the amount you get, with no trucking or logging costs taken out afterward. They say their "goal is honesty and transparency in the appraisal," and they also talk with landowners about how the woods will look after harvest, aiming to log it in a way that matches what you want to see left standing, whether that is a light cut or a heavier one. There is no stated minimum acreage or tract size, so this looks like a business that will size up a job on its own merits rather than screen it by acreage first. This fits a landowner near Middlebury or LaGrange who has White Oak or Walnut worth asking about, and who wants a flat, guaranteed number up front before committing to a cut. From forkslumber.net, read 8 October 2026.

Shipshewana Hardwoods is a mill in Shipshewana, Indiana. It has a Google Maps business listing in that category. It is also listed as a logging contractor and a consulting forester. A listing here is not an endorsement.

Tree City Sawmill is a mill in Greensburg, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Laughery Sawmill is a mill in Dillsboro, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Hickory Ridge Portable Sawmill is a small sawmill business based in Milan, Indiana. It is run by Dominic "Mick" Tallarico, a Certified Arborist who has been in the business for thirty years. The mill takes on sawing of any size, from a single log to hundreds of them, and also handles stacking and drying, rustic furniture, and custom chain saw carving. Mick's background as an arborist means he looks at what each tree is good for before it goes through the mill. The business says, "If you have one log or hundreds of logs, we can saw to your requirements." It serves Franklin County and describes its reach as "Serving The Tri-State Area," including Cincinnati, Ohio and Indiana. This fits a landowner who has a smaller amount of timber, even just a log or two, and wants it sawn into lumber or turned into something like furniture rather than sold off as a standing timber sale. From hickoryridgeportablesawmill.com, read 8 October 2026.

Vernon Herbert Sawmill is a mill in Greensburg, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Napoleon Hardwood Lumber Company is a mill in Napoleon, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Sulphur Lumber, based in Yorktown, Indiana, is a sawmill and building supply operation. It sells lumber packs, Andersen windows and doors, Therma-Tru entry and exterior doors, trim, trusses, and metal roofs and siding to builders, contractors, remodelers, and homeowners. It does not buy standing timber or do logging work, so it isn't the place to call if you want someone to walk your woods and make an offer on your trees. The company traces back to 1936, when it was founded by the McShirley family, and it now operates from Yorktown. Trusses are "manufactured on site to your specifications," and the yard offers machine stress rated lumber for jobs that need it. It serves Delaware, Henry, Randolph, Jay, Wayne, Madison, Hancock, Hamilton, Blackford, Grant, and Marion counties, with jobsite drops placed around the foundation to help framing crews work more easily. This fits a landowner who is building or remodeling and needs lumber, windows, doors, or trusses supplied to the site, not someone looking to sell timber off their acreage. From sulphurlumber.com, read 8 October 2026.

Southern Indiana Hardwood Inc. is a logging contractor in Huntingburg, Indiana. It has a Google Maps business listing in that category. It is also listed as a mill. A listing here is not an endorsement.

Coleman Sawmill Supply is a mill in Orleans, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Michiana Timber and Tree works out of Shipshewana, Indiana. They handle timber management, tree removal and storm cleanup, pruning and hazard tree assessments, lot clearing, and they run a portable sawmill for custom lumber on-site. They work with walnut, other hardwoods, and softwoods, and they also sell hardwood firewood. On timber jobs, they start with a walk-through of your woods to check tree health, then everything gets "mapped, marked, and measured" before any cutting starts. They do a salvage cut first to clear out low-quality trees, then move to selective harvest that leaves the better timber standing for later. They mark, cut, and market the logs themselves rather than farming that out, and you can sell to them directly or have them market the timber on your behalf. They serve Shipshewana and LaGrange County, along with Elkhart, Goshen, Warsaw, Kendallville, Columbia City, Fort Wayne, Auburn, Middlebury, South Bend, and into Sturgis, Coldwater, and Three Rivers in Michigan. They say they're "licensed, bonded, and insured" and have been doing this since 2004, so over 20 years. There's no stated minimum acreage. One landowner described a job this way: "Michiana Tree helped us select and harvest trees from our wooded acreage," which gives a sense of the scale they'll take on, though it wasn't a plot of a stated size. This fits a landowner in LaGrange County or nearby who wants one outfit to walk the woods, mark the harvest, cut it, and handle the mill or firewood end too, without bringing in separate contractors for each step. From michianatimbermanagement.com, read 8 October 2026.

Evergreen Log Sawing is a sawmill in Milford, Indiana, on County Road 19. It has been running since 2016. The idea is right there in its own words: "From Your Tree To Your Lumber." The work is precision timber and log sawing, turning your logs into custom-sawn lumber. They cut hickory, red oak, white oak, walnut, elm, hackberry, pine, and tulip. The jobs range widely in size, "From a single log cut to a full shipment" of custom-sawn lumber, so they'll take on a small amount of wood or a bigger load. They serve Milford and the surrounding communities, based in Elkhart County. This is a mill you'd bring logs to, or have logs sawn for you, rather than a company that buys standing timber or manages a harvest on your land. If you've already got logs down, or you're planning a small cut and want them turned into usable boards or timbers, this is the kind of outfit that does that work. Homeowners, woodworkers, contractors, and hobbyists are all mentioned as the kind of customer they work with. This fits a landowner who has logs ready to go and wants them sawn into lumber close to home in the Milford area, not someone still deciding whether to sell standing timber. From evergreenlogsawing.com, read 8 October 2026.

Creekside Sawmill is a mill in Topeka, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Dad's Sawmill And Woodshop is a mill in St. Joseph County, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Floyd Milling LLC is a sawmill and tree service run out of Evansville, Indiana, by a father-and-son team. They call themselves "a 100% family-owned sawmill, tree service, custom woodworking shop, and lumber supplier," and they handle logs under one roof, from standing tree to finished board. The work covers mobile sawmilling (they'll bring the saw to your land or you can haul logs to their shop), licensed tree removal, storm debris cleanup, custom live edge slabs and lumber, and a full industrial wood shop for custom fabrication. Jobs are billed by the "unit" (a 20 inch diameter log, 8 feet long counts as one), at $150 a unit, plus a one-time $150 travel and setup fee. Their mobile saw handles logs up to 36 inches across and 20 feet long, with a recommended minimum of 12 inches diameter and 6 feet length. Tree removal and milling are billed and scheduled separately, not done in the same visit. They hold a Licensed Tree Service credential. They're based in Evansville and list Pike County among the areas they serve. Their own description of the work: it "requires trust, transparency, and respect," and they say it's handled "entirely in-house" with their own equipment and wood shop. Floyd Milling suits a landowner in or near Pike County who wants one outfit to take a tree down, mill the logs, and turn the lumber into something finished, rather than hiring separate people for each step. From floydmilling.com, read 4 October 2026.

Corey Brothers Saw-Mill is a mill in Kingman, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Miller Custom Forest Products is a mill in Connersville, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Jim Lukens Quality Hardwoods, doing business as Quality Hardwoods & Sawmill, is a family owned sawmill and timber buyer in Knightstown, Indiana, running since 1962. They buy standing timber and saw logs into furniture grade lumber, live edge slabs, kiln dried hardwood, and green lumber, and also offer custom sawing, CNC milling, custom millwork, and custom hardwood flooring. On the timber buying side they handle timber appraisals, timber selection, harvesting coordination, regulatory compliance, logging, and hauling. They buy all hardwood species, naming Indiana's Black Walnut and Cherry specifically. For harvesting they describe using "selective logging (versus clear cutting)" rather than clearing a whole stand, and once a deal is struck they say they provide "quick, secure payment for logs and timber." They serve Henry County and work out from their base in East Central Indiana across the rest of Indiana and into Ohio, Michigan, Illinois, and Kentucky. The shop sits at 38 W Grant St in Knightstown, where lumber is dried down to 6-8% moisture and a landowner can hand pick their own boards once sawn. This one suits a landowner with hardwood on the ground, especially walnut or cherry, who wants a single family outfit to carry the job from standing tree through to appraisal, logging, hauling, and finished lumber. From lukensqualityhardwoods.com, read 8 October 2026.

Voyles George Sawmill is a mill in Salem, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Blue River Wood Products is a mill in Salem, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

The Emerald Sawyer is a mobile sawmill based in Brownsburg, Indiana, serving Hendricks County. Instead of you hauling logs to them, they bring the mill right to your property and cut your logs into lumber on site. They work with oak, mixed hardwood, and cherry, and their equipment can mill logs up to 21 feet long and 30 inches wide. Beyond the milling itself, they offer custom millwork and consultation for landowners who aren't sure what to do with their trees, plus kiln dried firewood made from local offcuts and tree company wood. The business grew out of a hobby project to use fallen and damaged trees on personal property, and has since grown into work for both companies and private individuals. Their own words sum up the approach: "We will bring the mill to you," and as they put it, "there is always value in timber." This isn't a timber buying or consulting outfit in the land-sale sense. It's a milling service, good for someone who already has logs down, whether from storm damage, a clearing job, or a few trees they want turned into usable lumber, and wants that work done on their own ground. This fits a landowner in or near Hendricks County who has logs ready to cut, not standing timber to sell, and wants a portable mill brought to the property rather than shipping wood off site. From theemeraldsawyer.com, read 8 October 2026.

Quality Hardwood Products Inc is a mill in Claypool, Indiana. It has a Google Maps business listing in that category. It is also listed as a logging contractor, a timber buyer and a consulting forester. A listing here is not an endorsement.

Minkerfarm sawmill is a mill in Hamlet, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Harmony Ridge Forest Products is a mill in Norman, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Sawmill is a mill. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Carlos Lumber is a mill in Modoc, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Baxter Lumber LLC is a mill in Butlerville, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Phillips Lumber & Millwork is a sawmill and millwork shop in Deputy, Indiana. It's family owned and has been running since 1963, making wood products rather than buying standing timber or logging tracts. What they make is hardwood flooring, wood tops, thermally modified lumber, live edge wood, and outdoor wood boilers. The work serves Jefferson county, and their own pages mention Madison, Louisville, Cincinnati, Chicago, Indianapolis, Columbus, and New Albany as areas they reach. They say their specialty is "custom projects that are truly unique to your style and needs," and that they'll work with "a cabinet shop contractor, home owner or hobbyist." There's no minimum tract size given, since this isn't a timber-buying operation. It's a mill taking in wood and turning it into finished products. This fits a landowner who already has lumber or logs and wants it milled or worked into flooring, tops, or other finished pieces, not someone looking for a buyer to come harvest standing timber off their acres. From phillipslumbermill.com, read 8 October 2026.

Ford Sawmills Inc is a mill in Vincennes, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Mike’s Sawmill Service & Firewood is a mill in North Manchester, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Quality Hardwoods is a mill in Howe, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Sawmill Exchange is a mill in Wolcottville, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Pioneer Lumber Inc is a lumber store in Michigan City, Indiana, right on U.S. Highway 12. It runs as a sawmill and mill, and it also does woodworking and retail work out of the same location. What they offer is built around construction and home supply rather than standing timber. Their own words are "Contact us for all your new construction and home improvement needs today." They also mention being a supplier of Certified Industrial Crates, so that is part of what they sell alongside lumber. There is no mention of buying standing timber, logging a property, or naming tree species, so this is not a place to call about a timber sale on your land. Pioneer Lumber Inc is listed as serving LaPorte County. This fits a landowner who needs lumber, crates, or help with a construction or home improvement project, not one looking to sell timber off their acreage. From pioneerlumberinc.com, read 8 October 2026.

Manuwal Sawmill is a mill in Plymouth, Indiana. It has a Google Maps business listing in that category. A listing here is not an endorsement.