Timber Buyers

The state's own register is broader than this listing has been. NC Forest Service records CBR Logging as buying all hardwood and all softwood species in Washington County, and as dealing in standing timber, sawlogs and pulpwood rather than mixed hardwood alone. A Carolina Loggers Association member directory carries a matching name, though that directory publishes no city or state, so the match is on name alone. No website, Facebook page, BBB file or published review was found, and a federal SAFER keyword search returned no motor-carrier registration under this name.

Twelve power units and nine drivers put this among the larger logging outfits working out of Plymouth. The federal SAFER database lists H & L Logging as a private interstate carrier under USDOT #1796742, hauling logs, poles, beams and lumber, with its MCS-150 registration last updated in December 2025. By fleet size that is several times the one- and two-truck operations that make up most of the DOT-registered loggers in this corner of the state. A Carolina Loggers Association directory entry matches the name, but the directory lists no location, so the match is unconfirmed. No website, rating or review was found.

In business since October 2001 according to its Better Business Bureau file, Mark & Sons runs a small operation by federal numbers: the FMCSA lists a single power unit and two drivers under USDOT #3909887, registered for intrastate work only. The BBB has had a file open on the company since 2010 but has never issued a rating, saying it lacks sufficient information to do so, and the company is not accredited. The DOT registration also carries a mailing address in Sanford, a different part of the state from the Plymouth yard. No website, Facebook page or published review was found.

A timber management firm and a real estate brokerage in one: the company's own site says it buys land as well as standing timber and is 'always looking for mutually profitable transactions that benefit our customers, employees, and the larger environment.' In business since December 1986, it has been a BBB-accredited business since November 2021 and carries an A+ rating. The BBB file describes the work as procuring, merchandising and harvesting timber tracts, buying standing timber and facilitating replanting through the Sustainable Forestry Initiative. On harvesting, the company says its methods 'minimize disturbance of the land and leave it ready for a new crop of timber.'

About 165 people work at the Plymouth lumber mill, which went 362 consecutive days without a recordable injury in 2024 by Weyerhaeuser's own account of the site. It is a softwood sawmill - an industry mill locator places it on NC Highway 149 north of town - and the NC Forest Service register shows it buying southern yellow pine as sawlogs and as standing timber across eleven eastern counties. The mill is a facility of publicly traded Weyerhaeuser Company, and the state register lists a raw materials manager rather than an owner as the buying contact, so a landowner is selling to a corporate procurement desk.

Almost nothing about this company is verifiable from public sources. It appears in this directory's source data as an independent logging contractor working across twelve eastern North Carolina counties, but it does not appear on the NC Forest Service timber-buyer tables for Washington or Beaufort counties, has no Carolina Loggers Association directory entry, no federal motor-carrier registration, and no website, Facebook page, BBB file or published review that could be found.

A business-registry profile dates this Plymouth sawmill to 2012 and classifies it under the sawmill and planing mill codes, SIC 2421 and NAICS 321113. That single registry entry is essentially the whole public record: no company website, no Facebook page, no reviews, and no confirmed listing in the NC Forestry Association buyer's guide. The species and services previously shown here came from the state primary-processor spreadsheet and have not been confirmed by the company itself.

Despite the company name, nothing at Plymouth becomes paper. The mill makes softwood fluff pulp - the absorbent fibre inside baby diapers and adult incontinence products - on a single fibre line rated at 390,000 air-dry metric tonnes a year, employing 351 people. It opened in 1937 under the North Carolina Pulp Co. Domtar says nearly all of the mill's energy now comes from renewable sources, and the site holds FSC, SFI, PEFC and ISO 9001 certification. One thing to check before hauling: a fire in the wood yard on 3 August 2025 spread from a chip conveyor to supporting structures, and Washington County Emergency Management announced the mill would take no roundwood the following day.

Gilkey's representatives are Registered Foresters in both North and South Carolina, an unusual credential for a business filed under timber buyers rather than consultants, and the company offers landowners a free timberland and harvest assessment through a request form on its contact page. Founded in 1954 by Jess Parton and still family-owned, it manufactures hardwood lumber for the furniture, flooring and specialty wood product trades; the Rutherford County economic development office describes it as having grown into an international supplier. Its buying ground is wider than the county list on this page - the company says it purchases standing timber and offers forestry assistance across western North Carolina, upstate South Carolina and eastern Tennessee, and works within state Best Management Practices for water quality.

One truck, one driver. The federal SAFER database lists McEntire Services under USDOT #3032423 as a private, intrastate-only carrier hauling logs, poles, beams and lumber out of Rutherfordton, which squares with the single-county service area shown on this listing. That registration, last filed in March 2022, is effectively the entire public record for the business: no website, no Facebook page, no BBB file, no Carolina Loggers Association entry and no published reviews could be found.

Three generations in, Parton Lumber has changed what it cuts about as often as its markets have: southern yellow pine for post-war housebuilding, Appalachian hardwoods through the furniture years, and eastern white pine today for window and millwork manufacturers. Verno Parton started the company in 1948 and his grandsons Furman and Patrick run it now, with family involvement in lumber traced back to roughly the 1850s. The Rutherfordton operation employs about 130 people, produces some 54 million board feet a year and holds 3.2 million board feet of kiln capacity, selling into export markets as well as domestic ones. It buys standing timber directly and manages its own procurement, so a landowner can sell to the mill without a middleman.

Working western North Carolina and the upstate of South Carolina since 1998, this Rutherfordton buyer takes standing timber on tracts of five acres and up. Its Manta business listing says the company is fully insured, employs Certified Pro Loggers, offers free timber value estimates, and provides logging services as well as buying — all of it the company's own account of itself rather than an independent verification. The March 2024 statewide timber buyers list published by the South Carolina Forestry Commission carries the same Rutherfordton address and phone, so tracts on either side of the state line are in range.

One of the genuinely offline operations on the NC Forest Service register: a Rutherfordton outfit working just two counties, Rutherford and Polk, and listed as buying standing timber, sawlogs and pulpwood as well as running timber cruises. Searches on the business name, the owner's name and the phone number turned up nothing beyond the state register itself — no website, no Facebook page, no directory entry, no reviews. Everything shown here comes from that register listing.

The New Bern office is one branch of a timber merchant that says it was established in 1937, is headquartered in Conway, South Carolina, and runs more than three dozen field offices across seven southeastern states with over 100 timber buyers on staff. Canal Wood buys and markets veneer logs, sawtimber, chip-n-saw, pulpwood and fuel chips, and it is certified by the Forest Stewardship Council. Alongside buying, the company does management planning, thinning and harvesting, and a subsidiary, Canal Land & Timber, LLC, handles land sales. The Better Business Bureau records five other Canal Wood locations in North Carolina — Wallace, Nashville, Roanoke Rapids and Fairfield among them — and gives this office a street address at 810 Washington Post Rd.

Nothing about this company could be verified outside the NC Forest Service register, which lists it as a New Bern buyer of standing timber offering timber cruises across a twelve-county block of eastern North Carolina. A research pass found no website, no Facebook page and no readable directory entry — the only near-matches were a LinkedIn profile and two business-data pages that could not be opened. Treat the register listing as the whole of the record.

In business since 1958 — both the Better Business Bureau and Manta independently record that start date — Rankin Timber is a small shop, two to four employees, that pairs buying with consulting forestry. Its Manta listing describes the firm as buyers of standing timber, timber brokers and North Carolina Registered Foresters, offering forest management plans, forest management and wildlife management. For a landowner, that means the harvest can be planned and represented rather than simply bid on, which is unusual for an operation this size. Nearly seventy years in business gives it a longer track record than most buyers working the New Bern area.

The Better Business Bureau files this New Bern company not as a timber buyer but as a timber broker — an agent between individual landowners and the mills — which is a different arrangement from selling a tract outright to whoever cuts it. The BBB record puts the business start date at September 1985 and gives the company an A+ rating, though it is not BBB accredited and the file carries no customer reviews. No website, published reviews or trade coverage were found anywhere else.

Registered with the Better Business Bureau as Bay River Logger, LLC — singular — with a business start date of March 2005, twenty-one years working the counties around New Bern. The BBB file matches this listing's street address on Sand Hill Rd and its phone number exactly, which is the only independent confirmation the business exists; the BBB record itself is unrated and carries no reviews. No website, Facebook page or trade coverage was found.

A six-person, single-location crew whose working address is on Stony Branch Rd in New Bern rather than the PO Box that appears on the state register. The business-data aggregator Buzzfile puts the founding at 2017, which would make it one of the newer harvesting outfits in Craven County — most of the local operators date back decades further. Those figures are aggregator data rather than the company's own statement, and no website, Facebook page or reviews exist to check them against.

Gator Wood INC is a forestry consulting and timber buying business working with private landowners across North Carolina and Virginia, with an office in Wilson, NC. It was started in 1997. The work covers mixed hardwoods and runs from timber sales and timber evaluation to forest management plans, timber harvest plans, pulpwood thinning, wildlife management, reforestation, GIS mapping, forestry investment analysis, and land use tax guidance. In North Carolina it serves Northampton, Franklin, Nash, Wilson, Warren, Halifax, Edgecombe, Martin, Vance, Hertford, and Bertie counties, along with a wider list of counties across both states. Its foresters are described as "registered Foresters" and graduates of Virginia Tech or North Carolina State, and its logging crews are "certified logging contractors," with the company stating it is fully insured. The clients they describe range "from the small woodlot owner with 10 acres to forest land owners of large acreages," so 10 acres is the floor they name. This suits a landowner with a modest hardwood tract who wants one company to handle everything from the timber sale itself through replanting and ongoing management afterward. From gatorwoodinc.com, read 10 October 2026.

Unlike most stumpage buyers in Halifax County, Kerr runs its own log trucks. Federal motor carrier records under USDOT 337205 list eight power units and three drivers as of the August 2025 MCS-150 filing, and the cargo classification covers "Logs, Poles, Beams, Lumber" alongside "Machinery, Large Objects" — meaning the company hauls its own harvesting equipment onto a tract as well as the wood off it. An industrial directory describes the business as wholesaling rough, dressed and finished lumber and offering logging and forest management services, so it does more than buy stumpage. The NC Forest Service register records it as buying all hardwood and all softwood species, broader than the mixed-hardwood entry the listing was built from. No website, Facebook page or published reviews were found.

Registered with the NC Secretary of State in July 2019, Medlin Forest Products is one of the newest timber-buying operations working the Roanoke Rapids area. The state record shows a single managing member who is also the registered agent, at the same Stoneybrook Drive address as the business — an owner-operated buyer run from a home office rather than a mill yard. On the NC Forest Service register it lists fuel chips among its products alongside sawlogs and pulpwood, so it has an outlet for low-grade and biomass material as well as merchantable logs, and it records species as all hardwoods and all softwoods rather than the mixed hardwoods shown on this listing. No website, Facebook page or published reviews were found.

Roseburg is the largest commercial timberland owner in the Roanoke Valley region, holding roughly 158,000 acres acquired in 2017 plus about 30,000 more added in 2021 — close to 200,000 acres across North Carolina and Virginia. The Roanoke Rapids address is a timber management office rather than a mill, and the Roanoke Rapids Daily Herald reported in March 2024 that the building at 524 NC Highway 125 had been put up for sale after the forestry team moved to the company's new Roanoke Valley Lumber sawmill in Weldon. That mill opened in February 2024 on a 200-acre Halifax County site, covers 375,000 square feet, created 137 local jobs, and was designed for 400 million board feet of dimensional lumber a year; Roseburg said it chose the site partly for its proximity to the Roanoke Rapids office. The NC Forest Service register still lists a Roanoke Rapids procurement contact buying southern yellow pine sawlogs.

The 100 Gaston Road plant is the Roanoke Rapids Kraft Paper Mill, producing bag papers, wrapping papers and linerboard — so what it wants off a tract is pulpwood and chips, not sawlogs. Following the WestRock and Smurfit Kappa merger the site now trades as Smurfit Westrock, the name it carries on the Roanoke Valley Chamber of Commerce manufacturers roll. Mill workers are represented by United Steelworkers Local 9-0425; at the time of the merger announcement WestRock said no discussions had taken place regarding any specific facility, and local economic development officials told the press they expected the deal to add stability. One thing to check before calling: the NC Forest Service Halifax County buyer list now routes procurement through WestRock's Hopewell, Virginia office rather than a Roanoke Rapids contact.

Behind the PO Box mailing address is a working mill. The Forest Products Locator and an OSHA inspection record independently place Blue Ox at 190 Sawmill Road in Stoneville and classify it as an operating sawmill (NAICS 321113) cutting both softwood and hardwood. Its buying list is wider than most Piedmont mills — the NC Forest Service register adds sweetgum, black and tupelo gum, beech and ash to the usual oaks, poplar and pine, which matters on a mixed tract where odd-species stems otherwise get left standing. It buys in Stokes County as well as Rockingham. The only regulatory history found is a planned OSHA safety inspection opened in July 2013 and closed that September with one serious and six other violations, settled informally for $325.

A Stoneville timber buyer that appears on both the Rockingham and Stokes county NC Forest Service buyer registers. The register records it as buying all hardwood and all softwood species as standing timber, sawlogs, pulpwood and chips — broader than the mixed-hardwood entry this listing was originally built from. Beyond the state register, searches found no website, no Facebook page, no reviews and no NC Secretary of State corporate record under this name.

Two trucks and two drivers is what the federal motor carrier register shows for this outfit as of its October 2024 MCS-150 filing under USDOT 3349173 — a small crew that hauls its own wood rather than subcontracting it out. It buys standing timber, sawlogs and pulpwood in all hardwood and softwood species, and appears on the Stokes County buyer register as well as Rockingham's. Worth knowing if you are calling around: its yard on Anglin Mill Road sits roughly a mile from Shelton Logging & Chipping at 2861 Anglin Mill Road, two separately incorporated Shelton logging businesses on the same road. FMCSA also carries a second number for the business, (336) 573-9551. No website, Facebook page or published reviews were found.

Incorporated in October 1997 and still listed Current-Active with the NC Secretary of State, Stoneville Lumber holds something no other buyer in the Stoneville cluster does: a USDA APHIS-PPQ compliance agreement authorising it to receive logs from Canadian areas under gypsy moth quarantine, one of only 52 North Carolina facilities on that federal list. Its product range on the NC Forest Service register is the broadest around — standing timber, sawlogs, chip-n-saw, pulpwood, veneer and plywood logs, sawdust, chips and finished lumber — covering both what comes off a tract and what comes out of a mill. It is also one of the few Piedmont buyers that lists black walnut and cherry, two high-value specialty hardwoods most of its neighbours do not name. No website, Facebook page or published reviews were found.

Sawmilling in Stoneville since 1958, according to the business-data aggregator Buzzfile — long enough that the county road it sits on, Fulp Sawmill Road, carries its name. The Forest Products Locator lists it as an operating sawmill handling both softwood and hardwood, and it holds a USDA APHIS-PPQ compliance agreement allowing it to receive logs from Canadian areas under gypsy moth quarantine, one of only 52 North Carolina facilities on that federal list. It runs its own log trucks as a private interstate motor carrier under USDOT 969828, with five power units and four drivers on the September 2025 MCS-150 filing. One caveat for a landowner selling standing timber: Fulp does not appear on the NC Forest Service Rockingham or Stokes county buyer registers, so it is worth confirming whether it buys stumpage or only delivered logs.

This is one of the larger owner-operated crews in the Stoneville cluster: seven power units and seven drivers on its December 2024 federal motor carrier filing under USDOT 2351429, meaning it can move a tract without waiting on subcontracted hauling. The Anglin Mill Road address is a mailing address — FMCSA records the physical operating base as 200 Price Farm Road in Stokesdale, about 25 miles south in Guilford County, so its working range covers both counties. It also appears on the NC Forest Service Rockingham County buyer register as buying standing timber, sawlogs and pulpwood in all hardwood and softwood species, so it will buy the wood as well as cut it. FMCSA lists a second phone number, (336) 548-3860, alongside the one on the register.

Incorporated in April 1974, Elkins Sawmill is run by three officers who all share the family name. The Better Business Bureau rates it A+ — the company is not BBB accredited — and describes the product line as lumber, crossties, mulch and firewood, broader than the stumpage, sawlog and pulpwood purchasing the state register records. Besides the King Road mill in Moncure, the company also operates from an address in Goldston. It appears in the North Carolina Forestry Association's Buyer's Guide under timber buyers, though that guide carries non-member businesses alongside members, so membership should not be assumed.

Panel and veneer production, not sawn lumber, is what happens at the Corinth Road plant: the Forest Products Locator classifies the facility as “Veneer Plywood Panels” and records it as taking both softwood and hardwood. The Manufactured in North Carolina supplier database lists 256 employees on site and gives the product line as composite panels and mouldings. The plant belongs to ARAUCO, which describes itself as a global forest products manufacturer with more than 50 years of manufacturing experience and distribution to over 3,500 destinations across North America. Its place on this list as a timber buyer comes from the NC Forest Service register.

Hunt Forest Resources, LLC is a timber buyer based in Moncure, North Carolina, with forestry consulting, firewood, and wood recycling run alongside it. They buy stumpage, sawlogs, pulpwood, and chip-n-saw timber in pine and hardwood, and they also handle forest management plans and mapping, timber cruise and volume estimates, timber appraisal, timber sale and contract administration, reforestation, timber stand improvement, prescribed burning, herbicide application, insect and fire protection, and wildlife and recreation management. Their registered forester holds N.C. Registered Forester #1438, and the company carries ProLogger and American Tree Farm System (ATFS) standing. They work across a long list of North Carolina counties, from Alamance, Durham, and Wake, through Chatham and Moore, down to Brunswick and New Hanover, and out east to Dare, Hyde, and Beaufort, along with many others. On their own pages they describe offering "a diverse range of services that span the entire lifecycle of forest products, from land and timber management to sustainable harvesting, real estate services, wood products manufacturing and beyond," and say they manage "7,000 acres of timberland annually" across four facilities in the state. This suits a landowner who wants one outfit that can buy the timber, write the management plan, and keep an eye on the ground afterward, rather than stitching together a buyer, a consultant, and a logger separately. From huntforestry.com, read 10 October 2026.

Now trading as Kindled Provisions — Hunt Forest Resources states flatly that “East Coast Firewood, LLC is now Kindled Provisions” — this Moncure operation produces kiln-dried firewood rather than sawn products. The wood is USDA-certified pest- and mold-spore-free, which is what allows it to be moved across state lines and into parks and campgrounds. Production runs on a Multitek firewood processor and a Pezzolato vertical splitter, with quality checked using digital moisture readers on random samples, and the species offered include cherry, oak, hickory and Southern Appalachian hardwoods. The business shares its address and phone with Hunt's Pittsboro Woodyard and ships across the southeastern United States.

Two records, two different jobs. The NC Forest Service register lists Deberry Land & Timber as a timber buyer working twelve counties, while the IndustryNet business directory classifies the company under logging — by both SIC and NAICS code — and describes what it does as hardwood timber logging. IndustryNet also records a street address in Troy alongside the PO Box in the state register, and notes the company is not set up to receive email, so contact is by phone only. No website, no published reviews and no founding date were found.

The NC Forest Service timber buyers register is the only record that could be found for this company. It lists stumpage purchase and timber cruising across eleven counties in the central Piedmont, with a five-acre minimum tract — a smaller floor than some buyers will consider. Repeated searches turned up no website, no Facebook page, no directory profile, no reviews and no founding date, so nothing beyond the register entry has been independently confirmed.

Opened in 1945 as Troy Lumber Sales Corporation by Frederick Leslie Taylor, Sr., incorporated under its present name in 1948, and now in the third generation of Taylor family leadership. The Leslie Street mill employs more than 170 people and turns out over 160 million board feet of finished lumber a year. In 2023 the company bought a hardwood mill and converted it to pine production, and a November 2024 feature in Construction in Focus credited part of its growth to staying open through the COVID-19 pandemic while larger corporate mills shut down. That profile also describes a servant-leadership philosophy, daily and monthly safety meetings, and a workers' compensation experience rating improved by cutting accidents. The mill hires foresters, electricians, PLC programmers and heavy equipment mechanics directly rather than contracting them.

Uwharrie Lumber Co. is a timber buyer and mill based in Troy, North Carolina. They buy stumpage, sawlogs, and pulpwood, and they run a hardwood sawmill too, so they can take wood from standing timber through to sawn lumber. They work with Red Oak, White Oak, Yellow-Poplar, Hickory, and Mixed Hardwoods. They serve a wide stretch of counties: Alamance, Anson, Cabarrus, Caswell, Chatham, Cleveland, Cumberland, Davidson, Davie, Durham, and Forsyth. There's no stated minimum acreage, and no clear word on how small a job they'll take on, so if you're sitting on a small lot it's worth a call to ask directly rather than guessing. This fits a landowner in or near that stretch of counties who has hardwood timber to sell, whether standing or cut, and wants someone who both buys logs and mills them. From uwharrielumber.com, read 10 October 2026.

The BBB puts this Sanford operation's start date at September 14, 1971 — around 54 years of trading by the bureau's own file — though it is not BBB accredited and carries no rating, the bureau stating it has insufficient information to issue one. The N.C. Forest Service register lists the company buying all hardwood and softwood species as standing timber, sawlogs and pulpwood, broader than the single "mixed hardwoods" entry this listing previously carried. Manta categorises the business under pulpwood and shows about six employees. No website, Facebook page or published reviews were found anywhere.

A Sanford timber harvesting company that entered this directory from the NC Forest Service Timber Buyers Guide, recorded there as buying standing timber, sawlogs and pulpwood across five counties in the central Piedmont. It does not appear on the Forest Service's current county buyer lists for Lee, Chatham or Harnett, and no website, Facebook page, BBB file, directory entry or review of any kind could be found for it. The species and services shown here come from the original source record and are unverified.

Research turned up almost nothing on this Sanford company beyond a Facebook page indexed under its name and city — no website, no directory entry, no reviews, and no place on the current N.C. Forest Service buyer lists for Lee, Chatham or Harnett counties. Two similarly named businesses are unrelated and should not be confused with it: Elliott's Custom Sawmill, LLC of Winston-Salem, which owns the domain elliottsawmill.com, and Elliott Sawmilling Co., Inc. of Estill, South Carolina. The species and services listed here come from the directory's original source record and have not been confirmed.

The only confirmation found for this Burnsville outfit is the N.C. Forest Service's Yancey County buyer list, which records it purchasing all hardwood and softwood species as standing timber, sawlogs and pulpwood — a wider brief than the "mixed hardwoods" this listing previously showed. Searches on the company name, the phone number and the Blue Rock Road address returned no website, no Facebook page, no BBB file and no Carolina Loggers Association membership. What the register says is all that can be verified about it.

Unlike most crews on the Forest Service register, this Burnsville company hauls its own wood: it holds USDOT number 1009797 as a private interstate carrier of logs, poles, beams and lumber, with six power units and six drivers on the MCS-150 filed in July 2025. It is listed as a member of the Carolina Loggers Association, and the Yancey County buyer list records a broader species range than this listing previously carried, adding basswood, cherry and eastern white pine to the oaks, maples, hickory, walnut, ash and southern yellow pine. The BBB file, opened in September 2018, shows five employees and no rating. No website or published reviews were found.

Nothing could be verified about this Yancey County business beyond the NC Forest Service Timber Buyers Guide entry the listing was built from, and it does not appear on the Forest Service's current Yancey County buyer list either. Every other "A & D Contracting" that surfaced in searches is a general contractor in another town or state with no timber connection, so none of it was used here. No website, Facebook page, BBB file or Carolina Loggers Association membership exists for the Burnsville company.

Bryant And Young Lumber Company, INC is a sawmill in Burnsville, North Carolina. They buy raw materials straight from local loggers and landowners, running their own sawmill, kiln drying, and planer mill, with some export work too. If you have timber to sell, they want to hear from you. Their own words put it plainly: "if you are a private landowner that is interested in selling your timber, please contact our timber buyer." Timber purchases, forestry, land management, veneer log sales, and residual sales are all handled under one roof. They work in ash, maple, oak, white pine, and yellow poplar, and they list Yancey County as their service area. There's no stated minimum acreage, so there's nothing to go on there. The business has a team split across specific jobs, from timber purchasing to the sawmill floor to the kilns and planer mill, which suggests a real production operation rather than just a buying desk. This fits a landowner near Burnsville who wants to sell timber to an outfit that also mills and dries the wood itself, not just broker it elsewhere. From bylumber.com, read 10 October 2026.

Trading publicly as Parker Lumber, this Burnsville mill has been family owned and operated since 1984 and offers landowners a free timber analysis of their property before any harvest. The company describes its cutting as "very selective" and aimed at the "sustainability of the trees for future harvests", under the tagline Sustainable Harvest. It appears as a sawmill handling both softwood and hardwood on the Primary Forest Products Locator Network, and the BBB records about 20 employees at the US 19E yard. One side line unusual for a timber buyer: bulk landscaping mulch in several colors, sold by the pick-up load. The LLC itself was registered in North Carolina in 2005, converting the earlier Parker Forest Products, Inc.

The mill takes its name from Donald Sherman Henley, Sr., a Randolph County native and Korean War veteran whose January 2026 obituary described his life around "the hum of his sawmill, and his well-known red lumber truck." He was 94, and five sons survive him — consistent with the "& Sons" in the business name — but who runs the mill day to day now is not published anywhere. The Forest Products Locator classifies the operation as a sawmill handling both softwood and hardwood, and it appears on the NC Forest Service timber buyer register for Randolph County. No website, Facebook page, rating or review was found in research.

McDowell Lumber & Pallet Co., Inc. is a sawmill and pallet manufacturer in Asheboro, North Carolina. Alongside running the mill, they buy standing timber, logs, and land, so a landowner can go straight to the people who will actually mill the wood. They work in hardwoods: red oak, white oak, poplar, hickory, gum, ash, sycamore, maple, beech, and mixed hardwoods. Beyond buying timber, their listed work covers timber purchasing and evaluation, forest management planning, logging assistance, reforestation, land management consultation, hardwood sawmilling, kiln drying, surfacing and planing, custom pallet design, heat treating for export, and their own trucking. They describe themselves plainly as a company that will "buy land, timber, and logs," and they also sell mulch, chips, and sawdust locally by the full trailer load. They serve Randolph, Chatham, Davidson, Davie, Montgomery, Forsyth, Iredell, Rowan, Guilford, Rockingham, and Mecklenburg counties. The company traces back to 1974, when Tony McDowell started out scouting timber with "a lumberjack's eye," and it has grown from that single portable saw into a mill that now ships lumber well beyond the Carolinas. This fits a landowner in that stretch of central North Carolina who wants to deal with a mill that buys its own timber and logs, rather than a broker standing between the woods and the saw. From mcdowelllumberco.com, read 10 October 2026.

One of the quieter names on the NC Forest Service timber buyer register for Randolph County, buying standing timber, sawlogs and pulpwood across a ten-county range that reaches Rowan, Davie, Guilford and Forsyth. Research turned up nothing beyond that register entry — no website, no directory listing, no reviews, no founding date, nothing on the phone number or street address. For a landowner that means the register is the only public record, and any question about scale, equipment or what the mill is currently taking has to be asked directly.

Portable milling is the distinguishing thing here — the saw travels, rather than the logs. The Forest Products Locator classifies the business as a sawmill handling both softwood and hardwood, and the NC Forest Service register lists it as a timber buyer working Randolph, Montgomery, Guilford and Alamance counties. Beyond those two entries there is very little on record: no website, no Facebook page, no reviews, no founding year, and a Locator listing last updated in May 2021. This is a small operation whose entire public footprint is an address and a phone number on two state registers.

Canal Wood has been buying wood since 17 September 1937, when it was formed to supply pulpwood to International Paper's then-new mill at Georgetown, South Carolina. It describes itself as the largest independent timber merchant in the Southeast, with more than 100 staff timber buyers spread across three dozen-plus field offices in seven states; Riegelwood is one of seven North Carolina offices, alongside Lumberton, New Bern, Laurinburg, Louisburg, Wallace and Rockingham. The company's service list runs past the purchase itself — cruising, harvesting and thinning, management planning, timber marketing, transportation and land sales. Canal Wood also says it is certified by the Forest Stewardship Council; that is a claim on its own website and has not been checked against the FSC certificate database.

The Armour mill on Federal Road is a softwood sawmill, one location of West Fraser Timber Co. Ltd., a publicly traded producer that states it runs more than 50 locations including 32 lumber mills. It sits on the NC Forest Service register as a buyer of standing timber and sawlogs reaching twelve counties, from Columbus and Bladen west to Anson, and it belongs to the Columbus County Chamber of Commerce & Tourism. In March 2025 crews contained a fire in the mill's debris storage yard; a company spokesperson said all employees were safe, there was no property damage, and the mill, logs and lumber were not impacted.

A receiving woodyard rather than a mill: the NC Forest Service register lists it buying pulpwood and chip-n-saw across eleven counties, from Columbus and Brunswick through New Hanover, Pender, Bladen and Duplin, with a Riegelwood PO box as its address. Research could find no page anywhere describing the Cape Fear Woodyard as a facility in its own right — International Paper's own location URL for it returns a 404, and the Global Cellulose Fibers locations directory lists mills only, with no North Carolina woodyards at all. There is also an open question about the name on the sign: in August 2025 International Paper agreed to sell its Global Cellulose Fibers business, including the Riegelwood pulp mill this yard would feed, to American Industrial Partners. Whether the woodyard was part of that transaction is not documented.

Fluff, papergrade and specialty pulp come off the machines at Riegelwood, which means the raw material here is pulpwood and chips rather than sawlogs. The scale has changed twice in recent years. In October 2023 International Paper announced it would end production on one of the site's two pulp machines by year end, affecting roughly 200 of about 650 jobs, with the second machine continuing to run. Then in August 2025 IP agreed to sell the whole Global Cellulose Fibers business, Riegelwood included, to American Industrial Partners for $1.5 billion, with closing expected by the end of that year; the buyer cited the business's "large and sustainable wood basket" in announcing the deal. The mill publishes truck driver safety rules in Arabic, English, Russian and Spanish for inbound haulers.

An owner-operator sawmill in Haywood County that hauls its own wood: FMCSA records show USDOT 2546145 active and authorised to operate, with four power units and one driver on a snapshot dated August 2021, registered under the owner's own legal name rather than a corporate shell. The Forest Products Locator lists the business as a sawmill taking both softwood and hardwood, at the same Tracy Lane address and phone number carried on the NC Forest Service timber buyer register for Haywood County, where it appears as a buyer of standing timber and sawlogs. No website, Facebook page, review, rating or founding date was found.

Suncrest, LLC is a timber and wood products business in Waynesville, North Carolina, also known as Suncrest Mulch & More LLC. It buys timber and also turns wood into mulch and other products on site. On the timber side, the work includes sawlog purchase, pulpwood purchase, chip-n-saw purchase, and timber cruising, covering species like Southern Yellow Pine, Red Oak, White Oak, Yellow-Poplar, and Black Walnut. It serves landowners across Alexander, Alleghany, Ashe, Avery, Buncombe, Burke, Caldwell, Cherokee, Clay, Graham, Haywood, and Henderson counties. The mulch and biochar side runs from the Jonathan Creek Rd location, where it also offers bulk mulch delivery and retail yard sales to the public, working with pine and hardwood logs. As the business puts it, "we make our mulch out of repurposed locally harvested logs," and it describes the result as made "simply and sustainably." Mulch delivery is available within the J Creek area only, with a 10 yard minimum. The yard is open to walk-in customers with no appointment needed, and it takes cash, check, or credit card, with a 3.5% charge on card payments. This fits a landowner in its service counties who wants one place that will buy standing timber and also has an outlet for wood by-products like mulch, rather than a straight timber-only outfit. From suncrestmulch.com, read 10 October 2026.

Registered with the Forest Products Locator as a primary processor, this is a working sawmill that takes both softwood and hardwood logs, recorded there in size class 4. Yellow Pages files the business under lumber wholesale and posts hours of 7:30 to 5 Monday through Thursday with a half day Friday. Beyond those two register entries there is no company website, no Facebook page and no published reviews or ratings.

Oaks Unlimited, Inc is a sawmill and hardwood lumber supplier in Waynesville, North Carolina. They buy sawlogs and turn them into dried, graded lumber, working with Red Oak, White Oak, Yellow-Poplar, and Cherry. Besides buying logs, they handle kiln drying, custom sawmilling, computer-controlled grading, custom width and length sorting, ripping and surfacing, and double-end trimming. Lumber goes out both to local buyers and by the truckload or container for export, with retail and wholesale sales both offered. Grading is done by NHLA Certified Inspectors. They serve Haywood, Madison, Buncombe, Swain, and Jackson counties, and say they "ship truckloads and containers throughout the USA and to companies worldwide." This is a mill and lumber business first, not a logging crew walking your woods. If you have Red Oak, White Oak, Yellow-Poplar, or Cherry sawlogs and want a buyer who processes the wood all the way into finished lumber, including drying and surfacing, Oaks Unlimited is set up for that end of the chain. A landowner looking for someone to cut timber and haul it off the land would want to ask whether that part of the work is handled here or done by someone else first. From oaksunlimited.com, read 10 October 2026.

The NC Forest Service register records stumpage, sawlog and pulpwood purchase plus timber cruising for this Haywood County operation, which both logs and buys - the two halves are in the business name. Mixed hardwood is the only species group recorded. Research found no website, no directory entry, no ratings and no reviews; the single web presence is a Facebook page whose name matches the business exactly.

Cold Creek Timber & Logs, Inc. is in Canton, North Carolina. They buy and sell logs across Western North Carolina, working from their yard on Pasture Drive rather than coming out to cut your trees. If you've already got logs cut, this is who takes them off your hands. They buy White Oak, Chestnut Oak, Red Oak, Black Oak, Poplar, Soft Maple, Ash, Cherry, and Black Walnut. Logs get sorted by grade and species, and they say they pay "top dollar for White Oak veneer logs." Their listed services are delivered log purchase, veneer log purchase, log grading and sorting, and log resale to mills. There are size rules for what they'll take: logs are measured on the small end and need to be at least 12 inches in diameter, at least 8 feet long, with two clear sides. They serve Haywood County. Their own description of the process is simple: "bring us your logs and leave with a check." This fits a landowner who already has timber cut and down and just needs a buyer for the logs, not someone looking to hire a crew to harvest standing trees. From cctlogs.com, read 10 October 2026.

Firewood is the actual business here: the Forest Products Locator lists a hardwood firewood operation in size class 2, and the state timber buyers guide adds pulpwood purchase and timber cruising on top of it. Two Canton addresses are on record, the Old Henson Cove Road yard and a second at 54 Pasture Drive. Yellow Pages posts retail hours far longer than a firewood yard usually keeps - 6:30 a.m. to 9 p.m. Monday through Saturday, 8 to 8 on Sunday - and notes PayPal is accepted. The Better Business Bureau opened a file in November 2012 but the business is not accredited and carries no rating, the BBB saying it has insufficient information.

Size class 15 on the state's Forest Products Locator puts this hardwood sawmill several bands above the other small Canton and Waynesville mills on the same list. It also appears on the locator's secondary-processor register, which means work beyond rough sawing happens on site. The NC Forest Service timber buyers guide separately records it as buying timber across six western counties, so a landowner in Haywood, Madison, Buncombe, Macon, Avery or Jackson can approach the mill directly.

A third-generation family firm working out of the Inez community outside Warrenton, with more than thirty years in the business by its own account. What separates it from a straight stumpage buyer is what it offers after the cut: reforestation assistance and land management consultation, so a harvest can be handled as one stage of a longer plan for the tract rather than a one-off sale. Buying and harvesting are both done in house. The company names Glenn Coleman III as president and Will Coleman as vice president, with Taylor Gartrell buying timber, and says the team trained at NC State University and Wake Technical Community College. Office hours run 8:30 to 4.

Louisburg Hardwood, Inc. works out of Warrenton, North Carolina. They buy timber, run a sawmill, and also produce firewood and pallets, so if you have trees to sell they can buy standing timber (stumpage) and handle sawlogs, pulpwood, and chip-n-saw too. They work in Red Oak, White Oak, Hickory, Ash, Yellow-Poplar, and Southern Yellow Pine. Their people hold NC ProLogger certification and USDA Heat-Treat Certification, which matters if you care about mill and transport standards for whatever comes off your land. They cover Franklin, Vance, Warren, Granville, Halifax, Wake, Nash, Johnston, Person, Northampton, and Edgecombe counties, so a tract anywhere in that stretch of North Carolina is in their range. The company has "been in the timber, sawmill, firewood, and environmental silt fence stake business for many years," working alongside related sawmill and pallet operations under the same ownership. Their firewood work is described as being "cut uniformly, cleaned thoroughly and processed before it is available for sale," which gives a sense of how they handle wood once it's down. This fits a landowner in that part of North Carolina who wants one outfit that can buy the standing timber, mill it, and also take the leftover wood into firewood or pallet stock, rather than dealing with separate buyers for each step. From smokehouselumber.com, read 10 October 2026.

Fifty people work at this Warren County hardwood sawmill, which has run under the same family since 1952 — president Gary Harris's father founded it with partners, Harris has been there 50 years, and his daughter is the third generation on site. Fifteen contract truckers bring in about 6 million feet of hardwood a year from forests within roughly 100 miles, and the mill turns it into sweet potato storage boxes, logging mats and racking sticks alongside pallets, framestock, flooring and green, rough, surfaced or air-dried lumber. Finished product ships into North Carolina, Virginia and South Carolina. It is facility-grade certified by the National Hardwood Lumber Association and has held an A+ BBB rating since accreditation in 2014.

Most of what leaves this mill in the Inez community outside Warrenton is environmental silt fence stakes, treated against mold, and owner Warren Griffin has said the operation is "probably the largest producer in the country" of them. The mill runs about a million board feet a month with 85 employees. It also builds sweet potato storage boxes from dense oak, hickory and ash aimed at North Carolina growers and packers, sells new and used Class B pallets, heat-treats pallets to USDA export requirements, and sells seasoned firewood. Glenn "Smokey" Coleman started the business in 1985; Griffin bought it in 2002. It is owned and operated by parent company Louisburg Hardwood, Inc. alongside sister company Louisburg Box and Pallet, LLC, and the site states it is Pro Logger certified.

In business since 1980, this Warren County operation is both a harvesting crew and a timber buyer: the NC Forest Service register lists it as purchasing standing timber, sawlogs and pulpwood and as offering a timber cruise. It holds interstate for-hire motor carrier authority under USDOT #3518186, running two power units and two drivers with cargo recorded as logs, poles, beams and lumber, so the same company that cuts the timber also hauls it. No website, Facebook page, reviews or ratings were found. The Better Business Bureau maintains a profile but lists the company as not rated for lack of information, and it is not BBB accredited.

American Woodyards, LLC is a family owned firewood yard in Raleigh, North Carolina, on Hillsborough Street. It is listed as a firewood and woodyards business, and also under timber buyers and wood recycling. The yard sells kiln dried and green firewood by the pound, year round. The firewood comes from local hardwoods including ash, cherry, hickory, maple, oak, and pecan, with red oak, white oak and hickory named as its main varieties. It also offers custom cut lumber and mulch. The lot is self-load, so customers load their own wood at the yard rather than having it delivered. It serves the Triangle area, naming Raleigh, Cary, Apex, Durham, Chapel Hill, Pittsboro, Wake Forest, Rolesville, Youngsville, Zebulon, Wendell, Holly Springs, Fuquay-Varina, Morrisville, Knightdale, Garner, and Clayton. The business describes itself as "providing the public with quality products since 1994," family owned and family operated, and says much of its wood comes from local job sites or customers' own backyards. This fits a landowner near Raleigh who has logs, scrap wood, or a few backyard trees to bring in or pick firewood up from, rather than someone looking to sell standing timber off a larger tract. From americanwoodyards.com, read 10 October 2026.

Federal motor carrier records list D and J Logging Inc with three power units and two drivers, registered as a private property carrier hauling construction cargo rather than a for-hire freight operation. Beyond that filing there is very little on the public record — no website, no reviews, no ratings, no certifications. The NC Forest Service register is the only account of what it buys: standing timber, sawlogs and pulpwood, with a timber cruise offered. Its Raleigh yard shares a street address with American Woodyards, LLC, though no source found confirms a relationship between the two businesses.

Incorporated in North Carolina on 30 December 1999 and still listed as current-active in the state registry, this is a timber buyer that leaves almost no public trace: no website, no Facebook page, no reviews, and no trade association or certification records were found. The NC Forest Service register is the only description of what it does — buying standing timber, with a timber cruise offered — and it covers a notably narrow area, just two counties. One thing worth verifying first: the only corporate filing found under this name gives a Siler City address in Chatham County, not the Raleigh mailing address shown here.

Despite the Raleigh details on this record, the mill itself sits on US Highway 301 at Enfield, in Halifax County — which is the one county the NC Forest Service register shows it buying in. The Forest Products Locator carries it on the primary mill list as a hardwood sawmill, and the register credits it with sawlog purchasing and a timber cruise. That mill listing was last updated in May 2021. No website, Facebook page, reviews, certifications or news coverage were found.

Appalachian Cooperage/taylor Stave runs a stave mill and cooperage in Nebo, North Carolina, in McDowell County. The business is listed as a mill and also as a timber buyer, and it works only in White Oak. The work here is specific: turning White Oak logs into staves for barrels, then coopering, charring and toasting those barrels, and exporting staves as well. They offer direct-to-mill purchase, so a landowner with White Oak to sell can deal with the mill straight on rather than through a broker. The parent company, Taylor Stave, launched in 2015 to produce and export what they call "Prime Wine grade staves" for buyers at home and abroad, and the people behind it point to a combined 25 plus years in stave manufacturing and barrel coopering, including years managing stave mills and a cooperage for a major distiller before starting this operation. They describe their own wood as "fine grain, hand graded staves with White Oak from the mountains of Western North Carolina." This fits a landowner in or near McDowell County who has good White Oak and wants to sell logs directly into a mill that turns that wood into barrels, rather than a general logging contractor or a consulting forester who handles mixed species and a full harvest plan. From appalachiancooperage.com, read 10 October 2026.

The species list here is Appalachian rather than coastal: eastern white pine, yellow-poplar, soft maple, red oak, white oak, black walnut and cherry, with no southern yellow pine at all. The NC Forest Service's Macon County register carries the mill as a registered timber buyer and records that it buys sawlogs only - not standing timber and not pulpwood - so a landowner would need a logger to cut and haul before this mill is a buyer. That state register is also the only public record found for the business; no website, Facebook page or reviews turned up.

Georgia-Pacific Corp/Dudley-Lumber is a mill and timber buyer in Dudley, North Carolina. It's part of Georgia-Pacific, a company founded in Augusta, Georgia, as the Georgia Hardwood Lumber Company, a hardwood lumber wholesaler. For landowners in Wayne County, the Dudley location buys standing timber, sawlogs, and chip-n-saw logs, working in Southern Yellow Pine. If you've got pine on your land in that area, this is the kind of outfit that would be in the market for it. Georgia-Pacific as a whole is a large manufacturer with plants across the country, making everything from building products to paper goods, so the Dudley mill sits inside a much bigger operation. The company's stewardship pages talk about "good science-based protection, restoration, enhancement, sequestration, and recovery practices" as part of how it approaches forestry. This listing suits a landowner in Wayne County with Southern Yellow Pine ready to sell, who wants to sell straight to a mill rather than work through a smaller local buyer. From gp.com, read 3 October 2026.

Peachland is the mill that takes what other yards turn away - gum, hickory, elm, hackberry and sycamore - cutting soft hardwoods into industrial timbers, cross ties and switch ties at a reported 16,000 to 18,000 board feet an hour. Edwards acquired the site in 2012; the parent company started in 1969 out of a dirt-floor chicken house in Marshville and now runs six North Carolina locations along with its own timber company and trucking arm. It is second-generation family owned and FSC certified company-wide. The NC Forest Service's Anson County register lists the Peachland mill as buying standing timber, hardwood grade logs, miscellaneous hardwood sawlogs and pine sawlogs, so a landowner sitting on a mixed, low-grade hardwood stand has a genuine outlet here.

Two more mills sit behind the sawmill here - a planer mill and a molder mill - and the NC Forestry Association's buyer's guide lists only two companies in the whole state under 'Molder Mill'. That means finished, profiled, appearance-grade southern yellow pine rather than commodity dimension stock, and the company describes its approach as 'old world craftsmanship combined with new world automation, innovation and leadership'. The same guide registers the company as a timber buyer as well as a mill and lists it as an NCFA member, though it does not appear on the NC Forest Service's Gates County timber-buyers list.

Veneer and plywood logs are the distinguishing item here. The NC Forest Service timber-buyer register lists this Yadkinville mill as buying them alongside standing timber and sawlogs, which is worth knowing if a stand holds a handful of high-grade butt logs that would be wasted on a sawlog price. The same register records the company as buying all hardwood and all softwood species, and it appears on both the Yadkin County and Ashe County buyer lists, so its buying area reaches into the northwestern mountains rather than stopping at the county line. No company website, published reviews or founding date could be confirmed.

Pulpwood is the useful detail on this one. The NC Forest Service Yadkin County timber-buyer register lists the mill as taking pulpwood as well as standing timber and sawlogs, which gives a landowner an outlet for thinnings and low-grade material that sawlog-only buyers will not touch. The register records it as buying all hardwood and all softwood species. Beyond the state register and a Forest Products Locator entry placing the mill on Bethel Church Road, nothing was found — no website, no social page, no published reviews, no founding date.

The NC Forest Service register for Alamance County records a broader species list for this Graham mill than for most buyers in the county — Southern Yellow Pine, yellow-poplar, sweetgum, soft maple, red oak, white oak, hickory and ash — which makes it a plausible outlet for a mixed hardwood stand rather than a straight pine tract. The same register shows it buying standing timber and sawlogs but not pulpwood, so thinnings and low-grade wood would have to go somewhere else. The business is otherwise undocumented online: no website, no social page, no published reviews and no founding date could be found.

This is the corporate option in Alamance County — one of 17 Canfor mills across the US South, and ranked far larger by the Forest Products Locator than the independent mills listed nearby. It buys Southern Yellow Pine only, as standing timber and sawlogs, so a hardwood stand is not a fit here; a pine tract gets a buyer whose procurement is handled by a staff forester listed on the state register. The mill holds an NC Title V air quality operating permit, which DEQ put out for public comment in spring 2024. Log-truck drivers reviewing the yard describe fast loading and an overnight tarping lot across the street: "Quick to load maybe a 40 min wait. In n out no issues."

Piedmont Hardwood Lumber Co., Inc. is a sawmill in Mt Pleasant, North Carolina. It's listed as a mill serving Cabarrus County. If you're a landowner with timber to sell, this is the kind of business that takes logs and turns them into lumber, rather than one that comes out and advises on standing timber or manages a sale for you. Beyond that, there isn't much more detail to share about how they handle jobs, what species they take, or how a sale would run day to day. There's no stated minimum acreage or tract size either, so that's something you'd want to ask about directly before you plan anything around them. This listing suits a landowner who already knows a sawmill is what they need, perhaps because they've had logs cut and are looking for somewhere local in Cabarrus County to take them, rather than someone still trying to figure out the first steps of selling timber off their land. From piedmonthardwood.com, read 10 October 2026.

Piedmont Timber - Full Service Timber Company is a logging contractor in Greensboro, North Carolina. It has a Google Maps business listing in that category. It is also listed as a timber buyer and a consulting forester. A listing here is not an endorsement.

Triangle Forest Products Inc is a timber buyer in Mebane, North Carolina. It has a Google Maps business listing in that category. It is also listed as a consulting forester and a logging contractor. A timber buyer purchases standing timber and arranges the harvest. A listing here is not an endorsement.

Braxton Sawmill Inc is a logging contractor in Graham, North Carolina. It has a Google Maps business listing in that category. A listing here is not an endorsement.

Claybourn Walters Logging Co is a logging contractor in Fairmont, North Carolina. It has a Google Maps business listing in that category. It is also listed as a timber buyer. A listing here is not an endorsement.